lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] clk: bcm2835: Support for clock parent selection
On Wed, Nov 18, 2015 at 10:30:17AM -0800, Eric Anholt wrote:

[...]

> > +static int bcm2835_clock_determine_rate(struct clk_hw *hw,
> > + struct clk_rate_request *req)
> > +{
> > + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
> > + struct clk_hw *parent, *best_parent = NULL;
> > + struct clk_rate_request parent_req;
> > + unsigned long rate, best_rate = 0;
> > + unsigned long prate, best_prate = 0;
> > + size_t i;
> > + u32 div;
> > +
> > + /*
> > + * Select parent clock that results in the closest but lower rate
> > + */
> > + for (i = 0; i < clk_hw_get_num_parents(hw); ++i) {
> > + parent = clk_hw_get_parent_by_index(hw, i);
> > + if (!parent)
> > + continue;
> > + parent_req = *req;
>
> parent_req appears dead, so it should be removed.

Yes, will do thanks.

> > + prate = clk_hw_get_rate(parent);
> > + div = bcm2835_clock_choose_div(hw, req->rate, prate);
> > + rate = bcm2835_clock_rate_from_divisor(clock, prate, div);
> > + if (rate > best_rate && rate <= req->rate) {
> > + best_parent = parent;
> > + best_prate = prate;
> > + best_rate = rate;
> > + }
> > + }
> > +
> > + if (!best_parent)
> > + return -EINVAL;
> > +
> > + req->best_parent_hw = best_parent;
> > + req->best_parent_rate = best_prate;
>
> I think you're supposed to req->rate = best_rate, here, too. With these
> two fixes,

I did not set req->rate to best_rate in order to avoid rounding down
twice the actual clock rate.

Indeed with patch 1 from this patchset bcm2835_clock_choose_div()
chooses a divisor that produces a rate lower or equal to the requested
one. As we call bcm2835_clock_choose_div() twice when using
clk_set_rate() (once with ->determine_rate() and once with ->set_rate()),
if I set req->rate in bcm2835_clock_determine_rate to the rounded down
one, the final rate will likely be again rounded down in
bcm2835_clock_set_rate().

Thanks,

--
Rémi Pommarel


\
 
 \ /
  Last update: 2015-11-18 20:41    [W:0.140 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site