lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 15/27] zd1201: move under zydas vendor directory
Date
Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
MAINTAINERS | 2 +-
drivers/net/wireless/Kconfig | 20 +----------------
drivers/net/wireless/Makefile | 3 +--
drivers/net/wireless/zydas/Kconfig | 33 +++++++++++++++++++++++++++++
drivers/net/wireless/zydas/Makefile | 1 +
drivers/net/wireless/{ => zydas}/zd1201.c | 0
drivers/net/wireless/{ => zydas}/zd1201.h | 0
7 files changed, 37 insertions(+), 22 deletions(-)
create mode 100644 drivers/net/wireless/zydas/Kconfig
create mode 100644 drivers/net/wireless/zydas/Makefile
rename drivers/net/wireless/{ => zydas}/zd1201.c (100%)
rename drivers/net/wireless/{ => zydas}/zd1201.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index e622877aaab4..ec098370ef3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11252,7 +11252,7 @@ USB ZD1201 DRIVER
L: linux-wireless@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Orphan
-F: drivers/net/wireless/zd1201.*
+F: drivers/net/wireless/zydas/zd1201.*

USB ZR364XX DRIVER
M: Antoine Jacquet <royale@zerezo.com>
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 315982a5ee73..35155e2dc8bf 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -24,6 +24,7 @@ source "drivers/net/wireless/cisco/Kconfig"
source "drivers/net/wireless/intel/Kconfig"
source "drivers/net/wireless/marvell/Kconfig"
source "drivers/net/wireless/st/Kconfig"
+source "drivers/net/wireless/zydas/Kconfig"

config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
@@ -70,25 +71,6 @@ config PRISM54

When built as module you get the module prism54

-config USB_ZD1201
- tristate "USB ZD1201 based Wireless device support"
- depends on CFG80211 && USB
- select WIRELESS_EXT
- select WEXT_PRIV
- select FW_LOADER
- ---help---
- Say Y if you want to use wireless LAN adapters based on the ZyDAS
- ZD1201 chip.
-
- This driver makes the adapter appear as a normal Ethernet interface,
- typically on wlan0.
-
- The zd1201 device requires external firmware to be loaded.
- This can be found at http://linux-lc100020.sourceforge.net/
-
- To compile this driver as a module, choose M here: the
- module will be called zd1201.
-
config USB_NET_RNDIS_WLAN
tristate "Wireless RNDIS USB support"
depends on USB
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 9498753f596b..4ee6d6d08743 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_WLAN_VENDOR_ST) += st/
+obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/

obj-$(CONFIG_HERMES) += orinoco/

@@ -24,8 +25,6 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o

obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o

-obj-$(CONFIG_USB_ZD1201) += zd1201.o
-
obj-$(CONFIG_RT2X00) += rt2x00/

obj-$(CONFIG_WL_MEDIATEK) += mediatek/
diff --git a/drivers/net/wireless/zydas/Kconfig b/drivers/net/wireless/zydas/Kconfig
new file mode 100644
index 000000000000..6140dfa04fed
--- /dev/null
+++ b/drivers/net/wireless/zydas/Kconfig
@@ -0,0 +1,33 @@
+config WLAN_VENDOR_ZYDAS
+ bool "ZyDAS devices"
+ default y
+ ---help---
+ If you have a wireless card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if WLAN_VENDOR_ZYDAS
+
+config USB_ZD1201
+ tristate "USB ZD1201 based Wireless device support"
+ depends on CFG80211 && USB
+ select WIRELESS_EXT
+ select WEXT_PRIV
+ select FW_LOADER
+ ---help---
+ Say Y if you want to use wireless LAN adapters based on the ZyDAS
+ ZD1201 chip.
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on wlan0.
+
+ The zd1201 device requires external firmware to be loaded.
+ This can be found at http://linux-lc100020.sourceforge.net/
+
+ To compile this driver as a module, choose M here: the
+ module will be called zd1201.
+
+endif # WLAN_VENDOR_ZYDAS
diff --git a/drivers/net/wireless/zydas/Makefile b/drivers/net/wireless/zydas/Makefile
new file mode 100644
index 000000000000..37179ef890ea
--- /dev/null
+++ b/drivers/net/wireless/zydas/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_USB_ZD1201) += zd1201.o
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zydas/zd1201.c
similarity index 100%
rename from drivers/net/wireless/zd1201.c
rename to drivers/net/wireless/zydas/zd1201.c
diff --git a/drivers/net/wireless/zd1201.h b/drivers/net/wireless/zydas/zd1201.h
similarity index 100%
rename from drivers/net/wireless/zd1201.h
rename to drivers/net/wireless/zydas/zd1201.h
--
1.7.9.5


\
 
 \ /
  Last update: 2015-11-18 16:01    [W:0.066 / U:3.148 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site