lkml.org 
[lkml]   [2015]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] ASoC: samsung: pass DMA channels as pointers
From
Date
On 17.11.2015 19:24, Arnd Bergmann wrote:
> On Tuesday 17 November 2015 10:16:36 Krzysztof Kozlowski wrote:
>> On 14.11.2015 02:22, Arnd Bergmann wrote:
>>> ARM64 allmodconfig produces a bunch of warnings when building the
>>> samsung ASoC code:
>>>
>>> sound/soc/samsung/dmaengine.c: In function 'samsung_asoc_init_dma_data':
>>> sound/soc/samsung/dmaengine.c:53:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
>>> playback_data->filter_data = (void *)playback->channel;
>>> sound/soc/samsung/dmaengine.c:60:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
>>> capture_data->filter_data = (void *)capture->channel;
>>>
>>> We could easily shut up the warning by adding an intermediate cast,
>>> but there is a bigger underlying problem: The use of IORESOURCE_DMA
>>> to pass data from platform code to device drivers is dubious to start
>>> with, as what we really want is a pointer that can be passed into
>>> a filter function.
>>>
>>> Note that on s3c64xx, the pl08x DMA data is already a pointer, but
>>> gets cast to resource_size_t so we can pass it as a resource, and it
>>> then gets converted back to a pointer. In contrast, the data we pass
>>> for s3c24xx is an index into a device specific table, and we artificially
>>> convert that into a pointer for the filter function.
>>>
>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>>
>> The patch looks good. I have only two questions below.
>
> Thanks for taking a look!
>
>>> @@ -1338,11 +1325,8 @@ static int samsung_i2s_probe(struct platform_device *pdev)
>>> sec_dai->dma_playback.dma_addr = regs_base + I2STXDS;
>>> sec_dai->dma_playback.ch_name = "tx-sec";
>>>
>>> - if (!np) {
>>> - res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
>>> - if (res)
>>> - sec_dai->dma_playback.channel = res->start;
>>> - }
>>> + if (!np)
>>> + sec_dai->dma_playback.slave = i2s_pdata->dma_play_sec;
>>
>> I cannot this resource in original patch nor setting the 'dma_play_sec'
>> part. I guess this does not really matter as newer platforms were
>> converted to DT so 'np' will be set, right?
>
> Yes, that sounds correct.
>
>>> @@ -367,12 +367,6 @@ static int spdif_probe(struct platform_device *pdev)
>>>
>>> dev_dbg(&pdev->dev, "Entered %s\n", __func__);
>>>
>>> - dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
>>> - if (!dma_res) {
>>> - dev_err(&pdev->dev, "Unable to get dma resource.\n");
>>> - return -ENXIO;
>>> - }
>>> -
>>> mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> if (!mem_res) {
>>> dev_err(&pdev->dev, "Unable to get register resource.\n");
>>> @@ -432,7 +426,7 @@ static int spdif_probe(struct platform_device *pdev)
>>>
>>> spdif_stereo_out.dma_size = 2;
>>> spdif_stereo_out.dma_addr = mem_res->start + DATA_OUTBUF;
>>> - spdif_stereo_out.channel = dma_res->start;
>>> + spdif_stereo_out.slave = spdif_pdata->dma_playback;
>>>
>>> spdif->dma_playback = &spdif_stereo_out;
>>
>> No one sets ioresources and pdata for spdif device. No in-kernel board
>> files for it?
>
> Hmm, probably also a missing conversion to devicetree. The symbol used to be
>
> config SND_SOC_SAMSUNG_SMDK_SPDIF
> tristate "SoC S/PDIF Audio support for SMDK"
> - depends on SND_SOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210 || MACH_SMDKV310 || MACH_SMDK4212)
> + depends on SND_SOC_SAMSUNG
> select SND_SAMSUNG_SPDIF
>
> We still support all four of the above boards, but they are all DT-only
> and neither spdif.c nor smdk-spdif.c ever gained DT support. Is there
> anything I should change in this patch for this?

No, I think it is okay. I'll review the v2 you sent.

Best regards,
Krzysztof



\
 
 \ /
  Last update: 2015-11-18 02:41    [W:0.055 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site