lkml.org 
[lkml]   [2015]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] usb: dwc2: host: Fix missing device insertions
On Mon, 16 Nov 2015, Doug Anderson wrote:

> Alan,
>
> On Mon, Nov 16, 2015 at 11:31 AM, Alan Stern <stern@rowland.harvard.edu> wrote:
> > On Mon, 16 Nov 2015, Doug Anderson wrote:
> >
> >> ---
> >>
> >> usb: dwc2: host: Fix missing device insertions
> >>
> >> If you've got your interrupt signals bouncing a bit as you insert your
> >> USB device, you might end up in a state when the device is connected but
> >> the driver doesn't know it.
> >>
> >> Specifically, the observed order is:
> >> 1. hardware sees connect
> >> 2. hardware sees disconnect
> >> 3. hardware sees connect
> >> 4. dwc2_port_intr() - clears connect interrupt
> >> 5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
> >>
> >> Now you'll be stuck with the cable plugged in and no further interrupts
> >> coming in but the driver will think we're disconnected.
> >>
> >> We'll fix this by checking for the missing connect interrupt and
> >> re-connecting after the disconnect is posted. We don't skip the
> >> disconnect because if there is a transitory disconnect we really want to
> >> de-enumerate and re-enumerate.
> >
> > Why do you need to do anything special here? Normally a driver's
> > interrupt handler should query the hardware status after clearing the
> > interrupt source. That way no transitions ever get missed.
> >
> > In your example, at step 5 the dwc2 driver would check the port status
> > and see that it currently is connected. Therefore the driver would
> > pass a "connect status changed" event to the USB core and set the port
> > status to "connected". No extra checking is needed, and transitory
> > connects or disconnects get handled correctly.
>
> Things are pretty ugly at the moment because the dwc2 interrupt
> handler is split in two. There's dwc2_handle_hcd_intr() and
> dwc2_handle_common_intr(). Both are registered for the same "shared"
> IRQ. If I had to guess, I'd say that this is probably because someone
> wanted to assign the ".irq" field in the "struct hc_driver" for the
> host controller but that they also needed the other interrupt handler
> to handle things shared between host and gadget mode.
>
> In any case, one of these two interrupt routines handles connect and
> the other disconnect. That's pretty ugly but means that you can't
> just rely on standard techniques for keeping things in sync.

Okay, that is rather weird. Still, I don't see why it should matter.

Fundamentally there's no difference between a "connect" interrupt and a
"disconnect" interrupt. They should both do exactly the same things:
clear the interrupt source, post a "connection change" event, and set
the driver's connect status based on the hardware's current state.
The second and third parts can be handled by a shared subroutine.

If you think of these things as "connect changed" interrupts rather
than as "connect" and "disconnect" interrupts, it makes a lot of sense.

> It would probably be a pretty reasonable idea to try to clean that up
> more, but that would be a very major and intrusive change.

Maybe so -- I'll take your word for it since I'm not at all familiar
with the dwc2 code.

Alan Stern



\
 
 \ /
  Last update: 2015-11-16 21:41    [W:0.110 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site