lkml.org 
[lkml]   [2015]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH RESEND] net: smsc911x: Reset PHY during initialization
    From
    From: Pavel Fedin <p.fedin@samsung.com>
    Date: Fri, 13 Nov 2015 09:46:59 +0300

    > On certain hardware after software reboot the chip may get stuck and fail
    > to reinitialize during reset. This can be fixed by ensuring that PHY is
    > reset too.
    >
    > Old PHY resetting method required operational MDIO interface, therefore
    > the chip should have been already set up. In order to be able to function
    > during probe, it is changed to use PMT_CTRL register.
    >
    > The problem could be observed on SMDK5410 board.
    >
    > Signed-off-by: Pavel Fedin <p.fedin@samsung.com>

    Applied.


    \
     
     \ /
      Last update: 2015-11-16 21:01    [W:4.602 / U:0.936 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site