lkml.org 
[lkml]   [2015]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 4/6] dmaengine: tegra-apb: Only save channel state for those in use
Date
Currently the tegra-apb DMA driver suspend/resume helpers, save and
restore the registers for all channels regardless of whether they are
in use or not. Change this so that only channels that have been
allocated and configured are saved and restored.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
V3 changes:
- Updated comment to be on a single line

drivers/dma/tegra20-apb-dma.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 18a561376c63..d4cabd6931e5 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1545,6 +1545,10 @@ static int tegra_dma_pm_suspend(struct device *dev)
struct tegra_dma_channel *tdc = &tdma->channels[i];
struct tegra_dma_channel_regs *ch_reg = &tdc->channel_reg;

+ /* Only save the state of DMA channels that are in use */
+ if (!tdc->config_init)
+ continue;
+
ch_reg->csr = tdc_read(tdc, TEGRA_APBDMA_CHAN_CSR);
ch_reg->ahb_ptr = tdc_read(tdc, TEGRA_APBDMA_CHAN_AHBPTR);
ch_reg->apb_ptr = tdc_read(tdc, TEGRA_APBDMA_CHAN_APBPTR);
@@ -1579,6 +1583,10 @@ static int tegra_dma_pm_resume(struct device *dev)
struct tegra_dma_channel *tdc = &tdma->channels[i];
struct tegra_dma_channel_regs *ch_reg = &tdc->channel_reg;

+ /* Only restore the state of DMA channels that are in use */
+ if (!tdc->config_init)
+ continue;
+
if (tdma->chip_data->support_separate_wcount_reg)
tdc_write(tdc, TEGRA_APBDMA_CHAN_WCOUNT,
ch_reg->wcount);
--
2.1.4


\
 
 \ /
  Last update: 2015-11-13 18:01    [W:0.101 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site