lkml.org 
[lkml]   [2015]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 33/39] ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro
Date
Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

arch/arm/boot/dts/omap4-panda-es.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 2f1dabcc6adf..119f8e657edc 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,23 +34,23 @@
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};

&omap4_pmx_core {
led_gpio_pins: gpio_led_pmx {
pinctrl-single,pins = <
- 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
+ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
>;
};
};

&led_wkgpio_pins {
pinctrl-single,pins = <
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};

--
2.4.3


\
 
 \ /
  Last update: 2015-11-13 06:21    [W:0.217 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site