Messages in this thread | | | Date | Fri, 13 Nov 2015 10:26:43 +0800 | From | Dave Young <> | Subject | Re: [PATCH v3 00/12] usb: early: add support for early printk through USB3 debug port |
| |
On 11/13/15 at 10:04am, Lu, Baolu wrote: > Hi Dave, > > On 11/12/2015 02:01 PM, Dave Young wrote: > >Hi, Baolu > > > >On 11/12/15 at 10:45am, Lu, Baolu wrote: > >>>Hi Dave, > >>> > >>>Which device are you testing with? This implementation was developed > >>>and tested on Intel Skylake devices. > >>> > >>>It doesn't surprise me if it doesn't work with other silicons. But it do > >>>remind me to create a verified-list and put those known-to-work devices > >>>in it. > >>> > >I have not got time to do more test. What infomation do you want? > >lsusb -v? > > lspci -v >
Here is the controller information:
Host side:
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1905 Flags: bus master, medium devsel, latency 0, IRQ 27 Memory at ef120000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd
Target side:
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device 220c Flags: bus master, medium devsel, latency 0, IRQ 41 Memory at f0620000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd
Thanks Dave
| |