lkml.org 
[lkml]   [2015]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] stmmac: avoid ipq806x constant overflow warning
Date
Building dwmac-ipq806x on a 64-bit architecture produces a harmless
warning from gcc:

stmmac/dwmac-ipq806x.c: In function 'ipq806x_gmac_probe':
include/linux/bitops.h:6:19: warning: overflow in implicit constant conversion [-Woverflow]
val = QSGMII_PHY_CDR_EN |
stmmac/dwmac-ipq806x.c:333:8: note: in expansion of macro 'QSGMII_PHY_CDR_EN'
#define QSGMII_PHY_CDR_EN BIT(0)
#define BIT(nr) (1UL << (nr))

This is a result of the type conversion rules in C, when we take the
logical OR of multiple different types. In particular, we have
and unsigned long

QSGMII_PHY_CDR_EN == BIT(0) == (1ul << 0) == 0x0000000000000001ul

and a signed int

0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET == 0xc0000000

which together gives a signed long value

0xffffffffc0000001l

and when this is passed into a function that takes an unsigned int type,
gcc warns about the signed overflow and the loss of the upper 32-bits that
are all ones.

This patch adds 'ul' type modifiers to the literal numbers passed in
here, so now the expression remains an 'unsigned long' with the upper
bits all zero, and that avoids the signed overflow and the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer")

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 9d89bdbf029f..82de68b1a452 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -337,11 +337,11 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
QSGMII_PHY_RX_SIGNAL_DETECT_EN |
QSGMII_PHY_TX_DRIVER_EN |
QSGMII_PHY_QSGMII_EN |
- 0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
- 0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
- 0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
- 0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
- 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
+ 0x4ul << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
+ 0x3ul << QSGMII_PHY_RX_DC_BIAS_OFFSET |
+ 0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
+ 0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
+ 0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET);
}

plat_dat->has_gmac = true;


\
 
 \ /
  Last update: 2015-11-12 22:21    [W:0.242 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site