lkml.org 
[lkml]   [2015]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 1/3] scsi: mptxsas: try 64 bit DMA when 32 bit DMA fails
From
Date
On Tue, 2015-11-10 at 14:56 -0500, Sinan Kaya wrote:
>
> On 11/10/2015 2:43 PM, James Bottomley wrote:
> > The Issue, as stated by LSI is
> >
> > Initially set the consistent DMA mask to 32 bit and then change
> > it
> > to 64 bit mask after allocating RDPQ pools by calling the
> > function
> > _base_change_consistent_dma_mask. This is to ensure that all the
> > upper 32 bits of RDPQ entries's base address to be same.
> >
>
> Need somebody from mpt to confirm that this behavior is still valid for
> the recent cards besides altix.

OK, you don't seem to be understanding the problem: the Altix isn't a
LSI card, it was a SGI platform. It was the platform where we first
discovered the issue that a lot of storage cards didn't work because it
by default had no memory below 4GB. The reason coherent masks were
introduced was initially so the Altix could manufacture and manage a
region of memory in the lower 4GB region and we would guarantee to make
allocations from it so the storage cards would then work on that
platform.

I thought the Altix was a historical relic because after they
disappeared, there was no other platform with this issue ... until you
came along.

James




\
 
 \ /
  Last update: 2015-11-10 21:21    [W:0.030 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site