lkml.org 
[lkml]   [2015]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250
2015-11-10 1:05 GMT+03:00 Peter Hurley <peter@hurleysoftware.com>:
> On 11/09/2015 04:43 PM, Matwey V. Kornilov wrote:
>> 2015-11-10 0:30 GMT+03:00 Peter Hurley <peter@hurleysoftware.com>:
>>> On 11/09/2015 10:45 AM, Matwey V. Kornilov wrote:
>>>> 2015-11-09 17:40 GMT+03:00 Peter Hurley <peter@hurleysoftware.com>:
>>>>> On 11/08/2015 05:52 AM, Matwey V. Kornilov wrote:
>>>>>> 2015-11-07 19:03 GMT+03:00 Peter Hurley <peter@hurleysoftware.com>:
>>>>>>> On 11/07/2015 05:09 AM, Matwey V. Kornilov wrote:
>>>
>>> [...]
>>>
>>>>>>>> +static void serial8250_rs485_start_tx(struct uart_8250_port *p)
>>>>>>>> +{
>>>>>>>> + if (p->capabilities & UART_CAP_HW485 || !(p->port.rs485.flags & SER_RS485_ENABLED))
>>>>>>>> + return;
>>>>>>>> +
>>>>>>>> + if (p->port.rs485.flags & SER_RS485_RTS_ON_SEND) {
>>>>>>>> + serial_port_out(&p->port, UART_MCR, UART_MCR_RTS);
>>>>>>>> + if (p->port.rs485.delay_rts_before_send > 0)
>>>>>>>> + mdelay(p->port.rs485.delay_rts_before_send);
>>>>>>>
>>>>>>> So irqs are off for x msecs, and this cpu can't be used for anything else now?
>>>>>>> I think this needs to be solved differently; maybe with a timer?
>>>>>>
>>>>>> Call of serial8250_start_tx is wrapped with spin_lock_irq in serial_core.c:2154
>>>>>
>>>>> Yep, which is why I pointed out "irqs are off for x msecs".
>>>>>
>>>>>> I've tried to use msleep instead of mdelay but got "BUG: scheduling
>>>>>> while atomic".
>>>>>
>>>>> Right, can't sleep while irqs are off, which is why I suggested something
>>>>> like a timer.
>>>>
>>>> I am not sure that understand you correctly. Do you think that the
>>>> following would be ok?
>>>>
>>>> wait_queue_head_t wait;
>>>> init_waitqueue_head(&wait);
>>>> wait_event_timeout(wait, 0, p->port.rs485.delay_rts_before_send * HZ / 1000);
>>>
>>> Except for spinning, there is no way to wait-in-place with irqs off.
>>>
>>> You'll need to do something more complex, like
>>> 1. raise RTS
>>> 2. start a timer _and return early without starting tx_
>>> 3. timer goes off, handler actually starts tx
>>>
>>
>> I think this could lead to race conditions.
>> AFAIU when the kernel calls ops->start_tx(uport) and the function
>> returns, then it is supposed that the tx has been started.
>
> No; start_tx() must cause tx to become started, but tx does not
> have to have _already_ started when start_tx() returns.
>
> It would be very inefficient for start_tx() to _guarantee_ tx has
> already started _before_ returning. Note the 8250 driver merely
> writes to IER (which could be buffered and bridged).
>

Thank you, now this is becoming clear to me.

>> And that could be not true, if the timer is used.
>
> It's true that using a timer will be more complex with more state
> to manage, but being unable to service interrupts with this cpu for
> milliseconds is unacceptable.
>
> Regards,
> Peter Hurley
>



--
With best regards,
Matwey V. Kornilov.
Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
119991, Moscow, Universitetsky pr-k 13, +7 (495) 9392382


\
 
 \ /
  Last update: 2015-11-10 13:01    [W:0.051 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site