lkml.org 
[lkml]   [2015]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/7] spi: imx: add function to check for IMX51 family controller
Date
From: Anton Bondarenko <anton_bondarenko@mentor.com>

Similar to other controller type checks add check function for
IMX51. This also includes IMX53 and IMX6.

Signed-off-by: Anton Bondarenko <anton_bondarenko@mentor.com>
---
drivers/spi/spi-imx.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 06f52c3..48fdfa1 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -127,9 +127,14 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
return d->devtype_data->devtype == IMX35_CSPI;
}

+static inline int is_imx51_ecspi(struct spi_imx_data *d)
+{
+ return d->devtype_data->devtype == IMX51_ECSPI;
+}
+
static inline unsigned spi_imx_get_fifosize(struct spi_imx_data *d)
{
- return (d->devtype_data->devtype == IMX51_ECSPI) ? 64 : 8;
+ return is_imx51_ecspi(d) ? 64 : 8;
}

#define MXC_SPI_BUF_RX(type) \
@@ -1334,7 +1339,7 @@ static int spi_imx_probe(struct platform_device *pdev)
* Only validated on i.mx6 now, can remove the constrain if validated on
* other chips.
*/
- if (spi_imx->devtype_data == &imx51_ecspi_devtype_data &&
+ if (is_imx51_ecspi(spi_imx) &&
spi_imx_sdma_init(&pdev->dev, spi_imx, master))
dev_err(&pdev->dev, "dma setup error,use pio instead\n");

--
2.6.2


\
 
 \ /
  Last update: 2015-11-01 16:01    [W:0.229 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site