lkml.org 
[lkml]   [2015]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] iio: Heart Rate Monitors
From
Date
On 31/10/15 16:31, Andrew F. Davis wrote:
> Hello all,
>
> This series adds the TI AFE4404 "Ultra-small, Integrated AFE for
> Wearable, Optical Heart Rate Monitoring and Bio-Sensing".
>
> This work is based on previous work by Dan Murphy [0] who is working
> on other tasks at the moment, so I will be helping to continue
> upstreaming this driver. This is more of a re-write than a continuation
> and there are many changes so I am submitting this as a v1.
>
> This device is very similar to the AFE4403 and I was originally planning
> on pushing the two drivers together with common core functions in a
> third file. The AFE4403 driver is still being tested so I merged common
> code back into this driver, this is why this driver may seem a bit
> unnecessarily modular. I will probably split this stuff back out when
> I push the AFE4403.
>
> I also had some issues with sysfs naming for the channels; this device
> has three input channels from three LED stages and two ambient
> channels based on the LED stages. This might have been be a good place
> for using IIO modifiers[1], but we also have two differential channels
> based on the ambient channels, and channels cannot have both modifiers
> and be differential (the modifier is stored in the differential channel's
> ID field?).
True enough. Didn't expect to run into this particular problem, but I guess
someone will always make hardware breaking any assumptions we make from the
software side of things.
So I used sysfs names that would be close to what they
> would be if IIO supported these things.
Fair enough as a starting point though we probably want to figure out how
to do this 'right'. Adding an extra field to the channel descriptor will
be easy enough - it'll be event codes that are nasty to handle.

Jonathan
>
> [0] http://www.spinics.net/lists/linux-iio/msg18413.html
> [1] IIO_MOD_TEMP_AMBIENT could be renamed IIO_MOD_AMBIENT as it can
> also apply to LIGHT, PRESSURE, HUMIDITY, etc..
No problem with this change so please send a patch.
>
> Thanks,
> Andrew
>
> Andrew F. Davis (2):
> Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor
> iio: health: Add driver for the TI AFE4404 heart monitor
>
> .../ABI/testing/sysfs-bus-iio-health-afe4404 | 70 +++
> .../devicetree/bindings/iio/health/afe4404.txt | 27 ++
> drivers/iio/Kconfig | 1 +
> drivers/iio/Makefile | 1 +
> drivers/iio/health/Kconfig | 24 +
> drivers/iio/health/Makefile | 6 +
> drivers/iio/health/afe4404.c | 526 +++++++++++++++++++++
> drivers/iio/health/afe440x.h | 159 +++++++
> 8 files changed, 814 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-health-afe4404
> create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
> create mode 100644 drivers/iio/health/Kconfig
> create mode 100644 drivers/iio/health/Makefile
> create mode 100644 drivers/iio/health/afe4404.c
> create mode 100644 drivers/iio/health/afe440x.h
>



\
 
 \ /
  Last update: 2015-11-01 19:41    [W:0.053 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site