lkml.org 
[lkml]   [2015]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/4] arm64: Juno: Add support for the PCIe host bridge on Juno R1
On Fri, Oct 9, 2015 at 8:45 AM, Liviu Dudau <Liviu.Dudau@arm.com> wrote:
> Juno R1 board sports a functional PCIe host bridge that is
> compliant with the SBSA standard found here[1]. With the right
> firmware that initialises the XpressRICH3 controller one can
> use the generic Host Bridge driver to use the PCIe hardware.
>
> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
>
> [1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/
> ---
> arch/arm64/boot/dts/arm/juno-r1.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
> index c627511..a702a6b 100644
> --- a/arch/arm64/boot/dts/arm/juno-r1.dts
> +++ b/arch/arm64/boot/dts/arm/juno-r1.dts
> @@ -109,6 +109,26 @@
>
> #include "juno-base.dtsi"
>
> + pcie-controller@40000000 {
> + compatible = "pci-host-ecam-generic";

I think this is the first case of real h/w using this. We should have
a specific compatible here additionally. Perhaps the firmware did not
setup something correctly.

> + device_type = "pci";
> + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
> + bus-range = <0 255>;
> + linux,pci-domain = <0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + dma-coherent;
> + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000
> + 0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000
> + 0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4
> + 0 0 0 2 &gic 0 0 0 137 4
> + 0 0 0 3 &gic 0 0 0 138 4
> + 0 0 0 4 &gic 0 0 0 139 4>;
> + msi-parent = <&v2m_0>;
> + };
> };
>
> &memtimer {
> --
> 2.6.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-10-09 16:21    [W:0.849 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site