lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] hwmon: ina2xx: convert driver to using regmap
On Mon, Oct 26, 2015 at 05:24:32PM +0100, Marc Titinger wrote:
> Any sysfs "show" read access from the client app will result in reading
> all registers (8 with ina226). Depending on the host this can limit the
> best achievable read rate.
>
> This changeset allows for individual register accesses through regmap.
>
> Tested with BeagleBone Black (Baylibre-ACME) and ina226.
>
Pretty good. Couple of comments inline.

Thanks,
Guenter

> Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
> ---
> drivers/hwmon/ina2xx.c | 187 ++++++++++++++++++-------------------------------
> 1 file changed, 69 insertions(+), 118 deletions(-)
>
> diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
> index 4d28150..3edd163 100644
> --- a/drivers/hwmon/ina2xx.c
> +++ b/drivers/hwmon/ina2xx.c
> @@ -37,6 +37,7 @@
> #include <linux/of.h>
> #include <linux/delay.h>
> #include <linux/util_macros.h>
> +#include <linux/regmap.h>
>
> #include <linux/platform_data/ina2xx.h>
>
> @@ -84,6 +85,11 @@
> */
> #define INA226_TOTAL_CONV_TIME_DEFAULT 2200
>
> +static struct regmap_config ina2xx_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 16,
> +};
> +
> enum ina2xx_ids { ina219, ina226 };
>
> struct ina2xx_config {
> @@ -101,16 +107,10 @@ struct ina2xx_data {
> const struct ina2xx_config *config;
>
> long rshunt;
> - u16 curr_config;
> -
> - struct mutex update_lock;
> - bool valid;
> - unsigned long last_updated;
> - int update_interval; /* in jiffies */
> + struct regmap *regmap;
>
> int kind;
> const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS];
> - u16 regs[INA2XX_MAX_REGISTERS];
> };
>
> static const struct ina2xx_config ina2xx_config[] = {
> @@ -153,7 +153,11 @@ static int ina226_reg_to_interval(u16 config)
> return DIV_ROUND_CLOSEST(avg * INA226_TOTAL_CONV_TIME_DEFAULT, 1000);
> }
>
> -static u16 ina226_interval_to_reg(int interval, u16 config)
> +/*
> + * Return the new, shifted AVG field value of CONFIG register,
> + * to use with regmap_update_bits
> + */
> +static u16 ina226_interval_to_reg(int interval)
> {
> int avg, avg_bits;
>
> @@ -162,15 +166,7 @@ static u16 ina226_interval_to_reg(int interval, u16 config)
> avg_bits = find_closest(avg, ina226_avg_tab,
> ARRAY_SIZE(ina226_avg_tab));
>
> - return (config & ~INA226_AVG_RD_MASK) | INA226_SHIFT_AVG(avg_bits);
> -}
> -
> -static void ina226_set_update_interval(struct ina2xx_data *data)
> -{
> - int ms;
> -
> - ms = ina226_reg_to_interval(data->curr_config);
> - data->update_interval = msecs_to_jiffies(ms);
> + return INA226_SHIFT_AVG(avg_bits);
> }
>
> static int ina2xx_calibrate(struct ina2xx_data *data)
> @@ -187,12 +183,8 @@ static int ina2xx_calibrate(struct ina2xx_data *data)
> */
> static int ina2xx_init(struct ina2xx_data *data)
> {
> - struct i2c_client *client = data->client;
> - int ret;
> -
> - /* device configuration */
> - ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
> - data->curr_config);
> + int ret = regmap_write(data->regmap, INA2XX_CONFIG,
> + data->config->config_default);
> if (ret < 0)
> return ret;
>
> @@ -203,35 +195,40 @@ static int ina2xx_init(struct ina2xx_data *data)
> return ina2xx_calibrate(data);
> }
>
> -static int ina2xx_do_update(struct device *dev)
> +static int ina2xx_do_update(struct device *dev, int reg, unsigned int *rv)

How about ina2xx_read_reg() ?
do_update() doesn't really describe the function anymore.

> {
> struct ina2xx_data *data = dev_get_drvdata(dev);
> - struct i2c_client *client = data->client;
> - int i, rv, retry;
> + int ret, retry;
>
> - dev_dbg(&client->dev, "Starting ina2xx update\n");
> + dev_dbg(dev, "Starting ina2xx update\n");

"Starting register 0x%x read\n" ?
>
> for (retry = 5; retry; retry--) {
> - /* Read all registers */
> - for (i = 0; i < data->config->registers; i++) {
> - rv = i2c_smbus_read_word_swapped(client, i);
> - if (rv < 0)
> - return rv;
> - data->regs[i] = rv;
> - }
> +
> + ret = regmap_read(data->regmap, reg, rv);
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(dev, "read %d, val = 0x%04x\n", reg, *rv);
>
> /*
> * If the current value in the calibration register is 0, the
> * power and current registers will also remain at 0. In case
> * the chip has been reset let's check the calibration
> * register and reinitialize if needed.
> + * We do that extra read of the calibration register if there
> + * is some hint of a chip reset.
> */
> - if (data->regs[INA2XX_CALIBRATION] == 0) {
> - dev_warn(dev, "chip not calibrated, reinitializing\n");
> + if (*rv == 0) {
> + unsigned int cal;
> +
> + regmap_read(data->regmap, INA2XX_CALIBRATION, &cal);

This needs an error check.

> +
> + if (cal == 0) {
> + dev_warn(dev, "chip not calibrated, reinitializing\n");
>
> - rv = ina2xx_init(data);
> - if (rv < 0)
> - return rv;
> + ret = ina2xx_init(data);
> + if (ret < 0)
> + return ret;
>
> /*
> * Let's make sure the power and current registers
> @@ -239,11 +236,8 @@ static int ina2xx_do_update(struct device *dev)
> */
> msleep(INA2XX_MAX_DELAY);
> continue;
> + }

Indentation is messed up here.

> }
> -
> - data->last_updated = jiffies;
> - data->valid = 1;
> -
> return 0;
> }
>
> @@ -256,51 +250,29 @@ static int ina2xx_do_update(struct device *dev)
> return -ENODEV;
> }
>
> -static struct ina2xx_data *ina2xx_update_device(struct device *dev)
> -{
> - struct ina2xx_data *data = dev_get_drvdata(dev);
> - struct ina2xx_data *ret = data;
> - unsigned long after;
> - int rv;
> -
> - mutex_lock(&data->update_lock);
> -
> - after = data->last_updated + data->update_interval;
> - if (time_after(jiffies, after) || !data->valid) {
> - rv = ina2xx_do_update(dev);
> - if (rv < 0)
> - ret = ERR_PTR(rv);
> - }
> -
> - mutex_unlock(&data->update_lock);
> - return ret;
> -}
> -
> -static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
> +static int ina2xx_get_value(struct ina2xx_data *data, u8 reg, unsigned int rv)

rv -> regval

even though this requires you to split the line, it is a much better
variable name.

> {
> int val;
>
> switch (reg) {
> case INA2XX_SHUNT_VOLTAGE:
> /* signed register */
> - val = DIV_ROUND_CLOSEST((s16)data->regs[reg],
> - data->config->shunt_div);
> + val = DIV_ROUND_CLOSEST((s16)rv, data->config->shunt_div);
> break;
> case INA2XX_BUS_VOLTAGE:
> - val = (data->regs[reg] >> data->config->bus_voltage_shift)
> + val = (rv >> data->config->bus_voltage_shift)
> * data->config->bus_voltage_lsb;
> val = DIV_ROUND_CLOSEST(val, 1000);
> break;
> case INA2XX_POWER:
> - val = data->regs[reg] * data->config->power_lsb;
> + val = rv * data->config->power_lsb;
> break;
> case INA2XX_CURRENT:
> /* signed register, LSB=1mA (selected), in mA */
> - val = (s16)data->regs[reg];
> + val = (s16)rv;
> break;
> case INA2XX_CALIBRATION:
> - val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
> - data->regs[reg]);
> + val = DIV_ROUND_CLOSEST(data->config->calibration_factor, rv);
> break;
> default:
> /* programmer goofed */
> @@ -316,25 +288,25 @@ static ssize_t ina2xx_show_value(struct device *dev,
> struct device_attribute *da, char *buf)
> {
> struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> - struct ina2xx_data *data = ina2xx_update_device(dev);
> + struct ina2xx_data *data = dev_get_drvdata(dev);
> + unsigned int rv;

"regval" would be a better variable name. "rv" is confusing because it commonly
means "return value".

>
> - if (IS_ERR(data))
> - return PTR_ERR(data);
> + int err = ina2xx_do_update(dev, attr->index, &rv);
> +
> + if (err < 0)
> + return err;
>
> return snprintf(buf, PAGE_SIZE, "%d\n",
> - ina2xx_get_value(data, attr->index));
> + ina2xx_get_value(data, attr->index, rv));
> }
>
> static ssize_t ina2xx_set_shunt(struct device *dev,
> struct device_attribute *da,
> const char *buf, size_t count)
> {
> - struct ina2xx_data *data = ina2xx_update_device(dev);
> unsigned long val;
> int status;
> -
> - if (IS_ERR(data))
> - return PTR_ERR(data);
> + struct ina2xx_data *data = dev_get_drvdata(dev);
>
> status = kstrtoul(buf, 10, &val);
> if (status < 0)
> @@ -345,10 +317,8 @@ static ssize_t ina2xx_set_shunt(struct device *dev,
> val > data->config->calibration_factor)
> return -EINVAL;
>
> - mutex_lock(&data->update_lock);
> data->rshunt = val;
> status = ina2xx_calibrate(data);
> - mutex_unlock(&data->update_lock);
> if (status < 0)
> return status;
>
> @@ -370,17 +340,9 @@ static ssize_t ina226_set_interval(struct device *dev,
> if (val > INT_MAX || val == 0)
> return -EINVAL;
>
> - mutex_lock(&data->update_lock);
> - data->curr_config = ina226_interval_to_reg(val,
> - data->regs[INA2XX_CONFIG]);
> - status = i2c_smbus_write_word_swapped(data->client,
> - INA2XX_CONFIG,
> - data->curr_config);
> -
> - ina226_set_update_interval(data);
> - /* Make sure the next access re-reads all registers. */
> - data->valid = 0;
> - mutex_unlock(&data->update_lock);
> + status = regmap_update_bits(data->regmap, INA2XX_CONFIG,
> + INA226_AVG_RD_MASK,
> + ina226_interval_to_reg(val));
> if (status < 0)
> return status;
>
> @@ -390,18 +352,15 @@ static ssize_t ina226_set_interval(struct device *dev,
> static ssize_t ina226_show_interval(struct device *dev,
> struct device_attribute *da, char *buf)
> {
> - struct ina2xx_data *data = ina2xx_update_device(dev);
> + struct ina2xx_data *data = dev_get_drvdata(dev);
> + int status;
> + unsigned int rv;
>
> - if (IS_ERR(data))
> - return PTR_ERR(data);
> + status = regmap_read(data->regmap, INA2XX_CONFIG, &rv);
> + if (status)
> + return status;
>
> - /*
> - * We don't use data->update_interval here as we want to display
> - * the actual interval used by the chip and jiffies_to_msecs()
> - * doesn't seem to be accurate enough.
> - */
> - return snprintf(buf, PAGE_SIZE, "%d\n",
> - ina226_reg_to_interval(data->regs[INA2XX_CONFIG]));
> + return snprintf(buf, PAGE_SIZE, "%d\n", ina226_reg_to_interval(rv));
> }
>
> /* shunt voltage */
> @@ -455,7 +414,6 @@ static const struct attribute_group ina226_group = {
> static int ina2xx_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> - struct i2c_adapter *adapter = client->adapter;
> struct ina2xx_platform_data *pdata;
> struct device *dev = &client->dev;
> struct ina2xx_data *data;
> @@ -463,9 +421,6 @@ static int ina2xx_probe(struct i2c_client *client,
> u32 val;
> int ret, group = 0;
>
> - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
> - return -ENODEV;
> -
> data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> if (!data)
> return -ENOMEM;
> @@ -483,30 +438,26 @@ static int ina2xx_probe(struct i2c_client *client,
> /* set the device type */
> data->kind = id->driver_data;
> data->config = &ina2xx_config[data->kind];
> - data->curr_config = data->config->config_default;
> data->client = client;
>
> - /*
> - * Ina226 has a variable update_interval. For ina219 we
> - * use a constant value.
> - */
> - if (data->kind == ina226)
> - ina226_set_update_interval(data);
> - else
> - data->update_interval = HZ / INA2XX_CONVERSION_RATE;
> -
> if (data->rshunt <= 0 ||
> data->rshunt > data->config->calibration_factor)
> return -ENODEV;
>
> + ina2xx_regmap_config.max_register = data->config->registers;
> +
> + data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
> + if (IS_ERR(data->regmap)) {
> + dev_err(dev, "failed to allocate register map\n");
> + return PTR_ERR(data->regmap);
> + }
> +
> ret = ina2xx_init(data);
> if (ret < 0) {
> dev_err(dev, "error configuring the device: %d\n", ret);
> return -ENODEV;
> }
>
> - mutex_init(&data->update_lock);
> -
> data->groups[group++] = &ina2xx_group;
> if (data->kind == ina226)
> data->groups[group++] = &ina226_group;
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2015-10-27 02:21    [W:0.104 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site