lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.16.y-ckt 061/104] asix: Don't reset PHY on if_up for ASIX 88772
Date
3.16.7-ckt19 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michel Stam <m.stam@fugro.nl>

commit 3cc81d85ee01e5a0b7ea2f4190e2ed1165f53c31 upstream.

I've noticed every time the interface is set to 'up,', the kernel
reports that the link speed is set to 100 Mbps/Full Duplex, even
when ethtool is used to set autonegotiation to 'off', half
duplex, 10 Mbps.
It can be tested by:
ifconfig eth0 down
ethtool -s eth0 autoneg off speed 10 duplex half
ifconfig eth0 up

Then checking 'dmesg' for the link speed.

Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
drivers/net/usb/asix_devices.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5d194093f3e1..2c05f6cdb12f 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -890,7 +890,7 @@ static const struct driver_info ax88772_info = {
.unbind = ax88772_unbind,
.status = asix_status,
.link_reset = ax88772_link_reset,
- .reset = ax88772_reset,
+ .reset = ax88772_link_reset,
.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
.rx_fixup = asix_rx_fixup_common,
.tx_fixup = asix_tx_fixup,

\
 
 \ /
  Last update: 2015-10-26 15:21    [W:0.363 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site