lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/5] mtd: pxa3xx_nand: rework the timing setup
On 21 Oct 10:28 AM, Antoine Tenart wrote:
> Hello,
>
> Let's try one more time to get this merged.
>
> This series was part of a bigger one[1], which was split into smaller
> ones as asked by Ezequiel[2]. When we take this into account this is
> v9; with a v1 sent in January, 9 months ago.
>
> Another series, introducing the Berlin nand support, depends on this.
>
> The aim here is to use the nand framework to setup the timings,
> while keeping the old in-driver way of configuration timings for
> compatibility reasons.
>
> You can find the series at:
> https://github.com/atenart/linux.git berlin/4.3/nand-timings
>
> Antoine
>
> Since v3:
> - Moved back a chunk into the right patch.
> - Called pxa3xx_nand_config_flash() before KEEP_CONFIG.
> - Rebased on top of l2-mtd.git master.
>
> Since v2:
> - Added back the support for keep-config 16 bits devices
> - Fixed wrong unit in a calculation
> - Reworked the pxa3xx_nand_init_timings() logic
> - Allowed compile test the pxa3xx driver
>
> Since v1:
> - Rebased on top of v4.2-rc1
>
> Since the series was split up:
> - Reworked the ndcr setup
> - Removed the read_id_bytes update after device detection
>
> Antoine Tenart (5):
> mtd: pxa3xx: prepare allowing compile test

Nit: This commit subject sounds a bit off.

> mtd: nand: allow compile test of MTD_NAND_PXA3xx
> mtd: pxa3xx_nand: add helpers to setup the timings
> mtd: pxa3xx_nand: rework flash detection and timing setup
> mtd: pxa3xx_nand: clean up the pxa3xx timings
>
> drivers/mtd/nand/Kconfig | 2 +-
> drivers/mtd/nand/pxa3xx_nand.c | 274 +++++++++++++++++++++++++----------------
> 2 files changed, 168 insertions(+), 108 deletions(-)
>

The series look good and it's certainly a great improvement.
Thomas and Robert tested it, so we should be good to go:

Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

We can take a look at the timeout reported by Thomas afterwards.

BTW, it would be great if you could post a patch using Boris'
timings helpers: https://patchwork.ozlabs.org/patch/534919/ ?
--
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar


\
 
 \ /
  Last update: 2015-10-26 15:01    [W:0.125 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site