lkml.org 
[lkml]   [2015]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/4] i2c: designware-platdrv: enable RuntimePM before registering to the core
On Fri, Oct 09, 2015 at 10:39:24AM +0100, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
>
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

No feedback here, but for the other two drivers the same principle was
acked. CCing Mika, just in case.

Applied to for-current, thanks!

> ---
> drivers/i2c/busses/i2c-designware-platdrv.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 3dd2de31a2f8d3..73d58415bbc100 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -253,12 +253,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
> adap->dev.parent = &pdev->dev;
> adap->dev.of_node = pdev->dev.of_node;
>
> - r = i2c_add_numbered_adapter(adap);
> - if (r) {
> - dev_err(&pdev->dev, "failure adding adapter\n");
> - return r;
> - }
> -
> if (dev->pm_runtime_disabled) {
> pm_runtime_forbid(&pdev->dev);
> } else {
> @@ -268,6 +262,13 @@ static int dw_i2c_probe(struct platform_device *pdev)
> pm_runtime_enable(&pdev->dev);
> }
>
> + r = i2c_add_numbered_adapter(adap);
> + if (r) {
> + dev_err(&pdev->dev, "failure adding adapter\n");
> + pm_runtime_disable(&pdev->dev);
> + return r;
> + }
> +
> return 0;
> }
>
> --
> 2.1.4
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-10-15 14:21    [W:0.105 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site