lkml.org 
[lkml]   [2015]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/6] mmc: pwrseq: Document optional clock for the simple power sequence
Date
Some WLAN chips attached to a SDIO interface, need an external clock
to be operational. Since this is very common, extend the simple MMC
power sequence DT binding to support an optional clock.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

Changes since v2: None.

Changes since v1: None.
---
Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
index eaae652213ae..a462c50f19a8 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -12,6 +12,10 @@ Optional properties:
at initialization and prior we start the power up procedure of the card.
They will be de-asserted right after the power has been provided to the
card.
+- clocks : Must contain an entry for the entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entry:
+ "ext_clock" (External clock provided to the card).

Example:

--
2.1.3


\
 
 \ /
  Last update: 2015-01-29 16:21    [W:3.105 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site