lkml.org 
[lkml]   [2015]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH net-next v8 0/4] net: Add Keystone NetCP ethernet driver support
+ Felipe, Mugunthan for commenting on TI_CPSW, ALE.

On 01/28/2015 04:03 PM, Arnd Bergmann wrote:
> On Wednesday 28 January 2015 15:43:57 Murali Karicheri wrote:
>>> this. Hope I am on the right track.
>>
>> Reproduced this. Following errors seen when building the modules.
>>
>> LD [M] drivers/net/ethernet/ti/keystone_netcp.o
>> drivers/net/ethernet/ti/netcp_ethss.o: In function `init_module':
>> netcp_ethss.c:(.init.text+0x0): multiple definition of `init_module'
>> drivers/net/ethernet/ti/netcp_core.o:netcp_core.c:(.init.text+0x0):
>> first defined here
>> drivers/net/ethernet/ti/netcp_ethss.o: In function `cleanup_module':
>> netcp_ethss.c:(.exit.text+0x0): multiple definition of `cleanup_module'
>> drivers/net/ethernet/ti/netcp_core.o:netcp_core.c:(.exit.text+0x0):
>> first defined here
>> make[4]: *** [drivers/net/ethernet/ti/keystone_netcp.o] Error 1
>>
>> BTW, I had to disable cpsw_ale.c to get to build keystone NetCP. I am
>> assuming someone from TI is addressing this.
>>
>> drivers/net/ethernet/ti/cpsw_ale.c: In function ‘cpsw_ale_start’:
>> drivers/net/ethernet/ti/cpsw_ale.c:759:2: error: ‘KBUILD_MODNAME’
>> undeclared (first use in this function)
>> drivers/net/ethernet/ti/cpsw_ale.c:759:2: note: each undeclared
>> identifier is reported only once for each function it appears in
>
> I think both problems are nontrivial to fix. The first one is obviously
> that there are multiple init_module functions in one module. You have
> to either split the driver into multiple loadable modules with at most
> one init_module/cleanup_module pair each, or call one of the functions
> from the other one in the right order.
I have a version that is building now with out issues. I had to make
several modifications.

1. export functions from drivers/soc/ti/knav* that are used by the netcp
driver. I will be sending a patch for this soon.

2. Convert netcp_ethss.o to a module and add Kconfig for the same

config TI_KEYSTONE_NETCP
- tristate "TI Keystone NETCP Ethernet subsystem Support"
+ tristate "TI Keystone NETCP Core Support"
+ select TI_CPSW_ALE
depends on OF
depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
---help---
- This driver supports TI's Keystone NETCP Ethernet subsystem.
+ This driver supports TI's Keystone NETCP Core.
+
+ To compile this driver as a module, choose M here: the module
+ will be called keystone_netcp.
+
+config TI_KEYSTONE_NETCP_ETHSS
+ depends on TI_KEYSTONE_NETCP
+ tristate "TI Keystone NETCP Ethernet subsystem Support"
+ ---help---


And Makefile to change as

diff --git a/drivers/net/ethernet/ti/Makefile
b/drivers/net/ethernet/ti/Makefile
index 0a9813b..1dbb8b5 100644
--- a/drivers/net/ethernet/ti/Makefile
+++ b/drivers/net/ethernet/ti/Makefile
@@ -8,9 +8,13 @@ obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o
obj-$(CONFIG_TI_CPSW) += ti_cpsw.o
ti_cpsw-y := cpsw_ale.o cpsw.o cpts.o

obj-$(CONFIG_TI_KEYSTONE_NETCP) += keystone_netcp.o
-keystone_netcp-y := netcp_core.o netcp_ethss.o netcp_sgmii.o \
- netcp_xgbepcsr.o cpsw_ale.o
+keystone_netcp-y := netcp_core.o
+
+obj-$(CONFIG_TI_KEYSTONE_NETCP_ETHSS) += keystone_netcp_ethss.o
+keystone_netcp_ethss-y := netcp_ethss.o netcp_sgmii.o netcp_xgbepcsr.o \
+ cpsw_ale.o
3. export some of the functions in netcp_core.c to support building
keystone_netcp_ethss as module.

>
> The second problem is where I got stuck myself: cpsw_ale.c (also cpts.c)
> is getting linked into both modules, which is not allowed: It is
> impossible for the kernel to compile these if one driver is a module
> and the other one is not, and any use of KBUILD_MODNAME fails because
> it is unclear what the modname is if the file is compiled once to
> be linked into two drivers.

I am still looking into this. Both Keystone and TI CPSW driver would
need to use cpsw_ale.o and cpts.o (currently not used, but will need
this later). Not found a solution yet.

Murali
>
> Arnd


--
Murali Karicheri
Linux Kernel, Texas Instruments


\
 
 \ /
  Last update: 2015-01-29 02:21    [W:0.283 / U:2.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site