lkml.org 
[lkml]   [2015]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] gpio: pxa: remove mach IRQ includes
Date
In preparation to enable ARCH_MMP on ARM64, the include of mach/irqs.h
must be eliminated. mach/irqs.h was being included for IRQ_GPIO{0,1},
but these IRQs are always passed in as resources now. We can use irq0
and irq1 and get rid of IRQ_GPIOx. Get rid of the ifdef in the process
as it is no longer needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
---
drivers/gpio/gpio-pxa.c | 38 ++++++++++++++++++--------------------
1 file changed, 18 insertions(+), 20 deletions(-)

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index ad3feec..b4fb8de 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -17,6 +17,7 @@
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
@@ -27,8 +28,6 @@
#include <linux/syscore_ops.h>
#include <linux/slab.h>

-#include <mach/irqs.h>
-
/*
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
* one set of registers. The register offsets are organized below:
@@ -629,19 +628,18 @@ static int pxa_gpio_probe(struct platform_device *pdev)
}

if (!use_of) {
-#ifdef CONFIG_ARCH_PXA
- irq = gpio_to_irq(0);
- irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler);
-
- irq = gpio_to_irq(1);
- irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
-#endif
+ if (irq0 > 0) {
+ irq = gpio_to_irq(0);
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ if (irq1 > 0) {
+ irq = gpio_to_irq(1);
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }

for (irq = gpio_to_irq(gpio_offset);
irq <= gpio_to_irq(pxa_last_gpio); irq++) {
@@ -649,13 +647,13 @@ static int pxa_gpio_probe(struct platform_device *pdev)
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- } else {
- if (irq0 > 0)
- irq_set_chained_handler(irq0, pxa_gpio_demux_handler);
- if (irq1 > 0)
- irq_set_chained_handler(irq1, pxa_gpio_demux_handler);
}

+ if (irq0 > 0)
+ irq_set_chained_handler(irq0, pxa_gpio_demux_handler);
+ if (irq1 > 0)
+ irq_set_chained_handler(irq1, pxa_gpio_demux_handler);
+
irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
return 0;
}
--
2.1.0


\
 
 \ /
  Last update: 2015-01-27 06:01    [W:0.097 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site