lkml.org 
[lkml]   [2015]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
Hi Lee,

Just a minor remark/question,

David

On 01/22/2015 12:56 PM, Lee Jones wrote:
> On current ST platforms the LPC controls a number of functions. This
> patch enables support for the LPC Watchdog and LPC RTC devices on LPC1
> and LPC2 respectively.
>
> Signed-off-by: David Paris <david.paris@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> arch/arm/boot/dts/stih407-family.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index 3e31d32..04448a7 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -7,6 +7,7 @@
> * publishhed by the Free Software Foundation.
> */
> #include "stih407-pinctrl.dtsi"
> +#include <dt-bindings/mfd/st-lpc.h>
> #include <dt-bindings/reset-controller/stih407-resets.h>
> / {
> #address-cells = <1>;
> @@ -274,5 +275,24 @@
>
> status = "disabled";
> };
> +
> + /* Watchdog and Real-Time Clock */
> + lpc@8787000 {
> + compatible = "st,stih407-lpc";
> + reg = <0x8787000 0x1000>;
> + interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
In case of Watchdog, "interrupt" property is not used. So I think we can
remove it ?
> + clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
> + timeout-sec = <120>;
> + st,syscfg = <&syscfg_core>;
> + st,lpc-mode = <ST_LPC_MODE_WDT>;
> + };
> +
> + lpc@8788000 {
> + compatible = "st,stih407-lpc";
> + reg = <0x8788000 0x1000>;
> + interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
> + st,lpc-mode = <ST_LPC_MODE_RTC>;
> + };
> };
> };



\
 
 \ /
  Last update: 2015-01-23 10:01    [W:0.374 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site