lkml.org 
[lkml]   [2015]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/5] ARM: sunxi: dts: Add PS2 nodes to dtsi for A10 and A20
On Wed, Jan 21, 2015 at 1:32 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Hi Vishnu,
>
> On Fri, Jan 16, 2015 at 07:33:39PM +0530, Vishnu Patekar wrote:
>> Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> Why is there Hans Signed-off here?
Hans has modified the A10 dtsi and also tested on A10 board.
Shouldn't I add him as Signed-off?
>
>> ---
>> arch/arm/boot/dts/sun4i-a10.dtsi | 16 ++++++++++++++++
>> arch/arm/boot/dts/sun7i-a20.dtsi | 16 ++++++++++++++++
>> 2 files changed, 32 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
>> index 7b4099f..2c31242 100644
>> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
>> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
>> @@ -795,5 +795,21 @@
>> #address-cells = <1>;
>> #size-cells = <0>;
>> };
>> +
>> + ps20: ps2@01c2a000 {
>> + compatible = "allwinner,sun4i-a10-ps2";
>> + reg = <0x01c2a000 0x400>;
>> + interrupts = <62>;
>> + clocks = <&apb1_gates 6>;
>> + status = "disabled";
>> + };
>> +
>> + ps21: ps2@01c2a400 {
>> + compatible = "allwinner,sun4i-a10-ps2";
>> + reg = <0x01c2a400 0x400>;
>> + interrupts = <63>;
>> + clocks = <&apb1_gates 7>;
>> + status = "disabled";
>> + };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
>> index e21ce59..f35c691 100644
>> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
>> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
>> @@ -1093,5 +1093,21 @@
>> #interrupt-cells = <3>;
>> interrupts = <1 9 0xf04>;
>> };
>> +
>> + ps20: ps2@01c2a000 {
>> + compatible = "allwinner,sun4i-a10-ps2";
>> + reg = <0x01c2a000 0x400>;
>> + interrupts = <0 62 4>;
>> + clocks = <&apb1_gates 6>;
>> + status = "disabled";
>> + };
>> +
>> + ps21: ps2@01c2a400 {
>> + compatible = "allwinner,sun4i-a10-ps2";
>> + reg = <0x01c2a400 0x400>;
>> + interrupts = <0 63 4>;
>
> We recently switched to using includes and defines for these hardcoded
> values.
>
> Could you switch to it as well?
Okie, I did not notice that. Thanks for pointing out.
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com


\
 
 \ /
  Last update: 2015-01-21 12:21    [W:0.061 / U:1.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site