lkml.org 
[lkml]   [2015]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] clk: qcom: Add EBI2 clocks for IPQ806x
Hi,

On 01/17/2015 03:26 AM, Stephen Boyd wrote:
> On 01/16/2015 06:48 AM, Archit Taneja wrote:
>> The NAND controller within EBI2 requires EBI2_CLK and EBI2_ALWAYS_ON_CLK clocks.
>> Create structs for these clocks so that they can be used by the NAND controller
>> driver. Add an entry for EBI2_AON_CLK in the gcc-ipq806x DT binding document.
>>
>> Cc: Stephen Boyd <sboyd@codeaurora.org>
>> Signed-off-by: Archit Taneja <architt@codeaurora.org>
>
> Looks ok. I couldn't find this used in the downstream sources though.
> Can you point me to it? I'm mostly worried that this is a shared
> resource that never should be turned off, so exposing it to drivers may
> not be the right idea.

I'll share the sources.

>
>> +static struct clk_branch ebi2_aon_clk = {
>> + .hwcg_reg = 0x3b00,
>> + .hwcg_bit = 6,
>> + .halt_reg = 0x2fcc,
>> + .halt_bit = 0,
>> + .clkr = {
>> + .enable_reg = 0x3b00,
>> + .enable_mask = BIT(8),
>> + .hw.init = &(struct clk_init_data){
>> + .name = "ebi2_always_on_clk",
>>
>
> Can this be ebi2_aon_clk to match the macro?
>

I'll fix this.

Thanks,
Archit

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2015-01-19 11:41    [W:0.349 / U:1.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site