lkml.org 
[lkml]   [2015]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ti-soc-thermal: implement eocz bit to make driver useful on omap3
Hi!

> > Ok, what do you suggest? AFAICT, without MODE_CONFIG, continuous ADC
> > mode is not available, so we have to force it periodically, so this
> > should be correct.
>
> I will have a better look and let you know. for now, adding a single
> read should not hurt ( but I will double check)

Any news there?

> > > > + if (ret)
> > > > + return ret;
> > > > + }
> > > > +
> > > > spin_lock(&bgp->lock);
> > > > temp = ti_bandgap_read_temp(bgp, id);
> > > > spin_unlock(&bgp->lock);
> > > >
> > > > - ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
> > > > + ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
> > >
> > > this one should be part of your clean up patch
> >
> > Ok, can you apply the cleanup patch and I'll prepare one on the top of
> > it?
>
> I mean, you should resend the cleanup patch including the above '|=' removal, as you are already doing in the cleanup patch.
>

Ok, little patch-editing can not hurt :-).

Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2015-01-18 21:41    [W:0.050 / U:1.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site