lkml.org 
[lkml]   [2015]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 3/4] toshiba_acpi: Add support for USB Rapid Charge
On Wed, Jan 14, 2015 at 02:40:20PM -0700, Azael Avalos wrote:
> Newer Toshiba laptops equipped with USB 3.0 ports now have the
> functionality of rapid charging devices connected to their USB hubs.
>
> This patch adds support to use such feature by creating a sysfs entry
> named "usb_rapid_charge", accepting only two values, 0 to disable and
> one to enable, however, the machine needs a restart everytime the

s/one/1//

> function is toggled.
>
> Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
> ---
> drivers/platform/x86/toshiba_acpi.c | 107 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 107 insertions(+)
>
> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
> index 9e054c5..eba5f9e 100644
> --- a/drivers/platform/x86/toshiba_acpi.c
> +++ b/drivers/platform/x86/toshiba_acpi.c
> @@ -155,6 +155,7 @@ MODULE_LICENSE("GPL");
> #define SCI_USB_CHARGE_BAT_LVL_OFF 0x1
> #define SCI_USB_CHARGE_BAT_LVL_ON 0x4
> #define SCI_USB_CHARGE_BAT_LVL 0x0200
> +#define SCI_USB_CHARGE_RAPID_DSP 0x0300
>
> struct toshiba_acpi_dev {
> struct acpi_device *acpi_dev;
> @@ -188,6 +189,7 @@ struct toshiba_acpi_dev {
> unsigned int eco_supported:1;
> unsigned int accelerometer_supported:1;
> unsigned int usb_sleep_charge_supported:1;
> + unsigned int usb_rapid_charge_supported:1;
> unsigned int sysfs_created:1;
>
> struct mutex mutex;
> @@ -874,6 +876,60 @@ static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
> return 0;
> }
>
> +static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
> + u32 *state)
> +{
> + u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 };
> + u32 out[TCI_WORDS];
> + acpi_status status;
> +
> + if (!sci_open(dev))
> + return -EIO;
> +
> + in[5] = SCI_USB_CHARGE_RAPID_DSP;
> + status = tci_raw(dev, in, out);
> + sci_close(dev);
> + if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
> + pr_err("ACPI call to get USB S&C battery level failed\n");
> + return -EIO;
> + } else if (out[0] == TOS_NOT_SUPPORTED ||
> + out[0] == TOS_INPUT_DATA_ERROR) {
> + pr_info("USB Sleep and Charge not supported\n");
> + return -ENODEV;
> + }
> +

Same comment on return codes.

Although, on looking through the existing driver, I only see EIO, and internally
consistency is important.... we can stick with EIO for this driver.
--
Darren Hart
Intel Open Source Technology Center


\
 
 \ /
  Last update: 2015-01-18 20:21    [W:0.074 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site