lkml.org 
[lkml]   [2014]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] rtc: ds1307: add trickle charger device tree binding
On Mon, Sep 08, 2014 at 02:52:42PM +0100, Pavel Machek wrote:
> Hi!
>
> > I would suggest we have two properties that describe the resistor's
> > rating and whether or not there is a diode:
> >
> > trickle-resistor-ohms = <250>
> > diode-connected;
> >
> > That's easy for a human to write and/or validate, we can easily extend
> > it in future, requires no proliferation of macros, and describes the
> > hardware rather than telling software what to do.
> >
> > The driver becomes a little more complicated, but gains sanity checking,
> > which is a good thing.
>
> Certainly looks better than register bit defines.
>
> As rtc-bq32k has similar options, I'm interested, too. I believe we
> should add
>
> trickle-charge-enable;
>
> (we may not want to charge at all), and I believe the diode should be
>
> disconnect-diode;
>
> ... With diode connected, charge is slower, and that probably should
> be the default value. We don't want to give too much current in
> default case. (bq32k has hard-coded resistor value for
> diode/not-diode case).

I agree that if one case is less likely to be problematic / damaging
that should be the default.

Mark.


\
 
 \ /
  Last update: 2014-09-08 17:21    [W:0.108 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site