Messages in this thread | | | From | Dirk Gouders <> | Subject | Re: [BUG] Bisected Problem with LSI PCI FC Adapter | Date | Wed, 03 Sep 2014 14:47:32 +0200 |
| |
Andreas Noever <andreas.noever@gmail.com> writes:
> On Wed, Sep 3, 2014 at 12:57 PM, Dirk Gouders <dirk@gouders.net> wrote: >> On a Tyan VX50 (B4985) I ran into problems when updating the kernel: the >> PCI FC Adapter is no longer recognized. > > Can you provide the output of lspci -vvv and the output of dmesg from > a working boot? Which card is the one that is not recognized?
Sure, the card that disappeared is:
0a:00.0 Fibre Channel: LSI Logic / Symbios Logic FC949ES Fibre Channel Adapter (rev 02)
Output of lspci and dmesg:
- lspci -vvv ----------------------------------------------------------- 00:00.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev a4) Subsystem: Tyan Computer Device 4985 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000
00:01.0 ISA bridge: NVIDIA Corporation CK804 ISA Bridge (rev f1) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
00:01.1 SMBus: NVIDIA Corporation CK804 SMBus (rev a2) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 1080 [size=32] Region 4: I/O ports at 1000 [size=64] Region 5: I/O ports at 1040 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB controller: NVIDIA Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci
00:02.1 USB controller: NVIDIA Corporation CK804 USB Controller (rev a4) (prog-if 20 [EHCI]) Subsystem: Tyan Computer Device 4985 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at d4001000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci-pci
00:06.0 IDE interface: NVIDIA Corporation CK804 IDE (rev f3) (prog-if 8a [Master SecP PriP]) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at 1400 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_amd
00:07.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 1440 [size=8] Region 1: I/O ports at 1434 [size=4] Region 2: I/O ports at 1438 [size=8] Region 3: I/O ports at 1430 [size=4] Region 4: I/O ports at 1410 [size=16] Region 5: Memory at d4002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_nv
00:08.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 1458 [size=8] Region 1: I/O ports at 144c [size=4] Region 2: I/O ports at 1450 [size=8] Region 3: I/O ports at 1448 [size=4] Region 4: I/O ports at 1420 [size=16] Region 5: Memory at d4003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_nv
00:09.0 PCI bridge: NVIDIA Corporation CK804 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: d4100000-d41fffff Prefetchable memory behind bridge: d8000000-dbffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0a.0 Bridge: NVIDIA Corporation CK804 Ethernet Controller (rev f3) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at d4004000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1460 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: forcedeth
00:0b.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 4061 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x0, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr+ Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
00:0c.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 4071 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x0, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr+ Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
00:0d.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 4081 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 03, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
00:0e.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d4200000-d42fffff Prefetchable memory behind bridge: 00000000d4300000-00000000d43fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 4091 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:19.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:19.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:1a.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:1a.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:1b.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:1b.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1c.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:1c.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1c.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1c.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:1c.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:1d.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:1d.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1e.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:1e.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1e.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1e.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:1e.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1f.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:1f.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1f.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1f.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?>
00:1f.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:06.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) Subsystem: Tyan Computer Device 3870 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d4120000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at d4100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2080 [size=64] [virtual] Expansion ROM at d4180000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel driver in use: e1000
01:09.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics Innovation) Z7/Z9 (XG20 core) (prog-if 00 [VGA controller]) Subsystem: XGI Technology Inc. (eXtreme Graphics Innovation) Z7/Z9 (XG20 core) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- BIST result: 00 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at d4140000 (32-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
0a:00.0 Fibre Channel: LSI Logic / Symbios Logic FC949ES Fibre Channel Adapter (rev 02) Subsystem: LSI Logic / Symbios Logic Device 5010 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at d4210000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at d4200000 (64-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d4300000 [disabled] [size=1M] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [98] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Vector table: BAR=1 offset=00002000 PBA: BAR=1 offset=00003000 Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: mptfc Kernel modules: mptfc
80:00.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev a4) Subsystem: Tyan Computer Device 4985 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=3 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000
80:01.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev f1) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
80:07.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: NVIDIA Corporation Device cb84 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at b030 [size=8] Region 1: I/O ports at b024 [size=4] Region 2: I/O ports at b028 [size=8] Region 3: I/O ports at b020 [size=4] Region 4: I/O ports at b000 [size=16] Region 5: Memory at dc000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_nv
80:08.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: NVIDIA Corporation Device cb84 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at b048 [size=8] Region 1: I/O ports at b03c [size=4] Region 2: I/O ports at b040 [size=8] Region 3: I/O ports at b038 [size=4] Region 4: I/O ports at b010 [size=16] Region 5: Memory at dc001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_nv
80:0a.0 Bridge: NVIDIA Corporation CK804 Ethernet Controller (rev f3) Subsystem: Tyan Computer Device 4985 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at dc002000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at b050 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: forcedeth
80:0b.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=80, secondary=81, subordinate=85, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 40a1 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x0, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr+ Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
80:0c.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=80, secondary=86, subordinate=8a, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 40b1 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x0, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr+ Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
80:0d.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev f3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=80, secondary=8b, subordinate=8f, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 40c1 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
80:0e.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=80, secondary=90, subordinate=94, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee04000 Data: 40d1 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=1 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32+ WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- Port Arbitration Table [1a0] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [160 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 17, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport
- dmesg of working setup -----------------------------------------------
[ 0.000000] Linux version 3.14.17-gentoo (root@quad) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #1 SMP Wed Sep 3 10:48:45 CEST 2014 [ 0.000000] Command line: root=/dev/sda2 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ca000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007ffe9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ffea000-0x000000007fffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000cfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfc00000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000a2fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: NVIDIA CK8 /Tyan Transport VX50-B4985, BIOS TYAN Transport VX50 B4985 BIOS V3.01.B30 11/27/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xa30000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000a30000000 aka 41728M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f7770-0x000f777f] mapped at [ffff8800000f7770] [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x018fa000, 0x018fafff] PGTABLE [ 0.000000] BRK [0x018fb000, 0x018fbfff] PGTABLE [ 0.000000] BRK [0x018fc000, 0x018fcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xa2fe00000-0xa2fffffff] [ 0.000000] [mem 0xa2fe00000-0xa2fffffff] page 2M [ 0.000000] BRK [0x018fd000, 0x018fdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xa2c000000-0xa2fdfffff] [ 0.000000] [mem 0xa2c000000-0xa2fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0xa00000000-0xa2bffffff] [ 0.000000] [mem 0xa00000000-0xa2bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7ffdffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7fdfffff] page 2M [ 0.000000] [mem 0x7fe00000-0x7ffdffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x80000000-0xcfbfffff] [ 0.000000] [mem 0x80000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M [ 0.000000] BRK [0x018fe000, 0x018fefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x9ffffffff] [ 0.000000] [mem 0x100000000-0x9ffffffff] page 1G [ 0.000000] ACPI: RSDP 00000000000f77f0 000014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 000000007ffe0aab 000038 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000007ffe4c98 000074 (v01 NVIDIA CK8S 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 000000007ffe0ae3 0041B5 (v01 NVIDIA CK8 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007ffeafc0 000040 [ 0.000000] ACPI: SSDT 000000007ffe4d0c 005084 (v01 AMD POWERNOW 06040000 AMD 00000001) [ 0.000000] ACPI: SPCR 000000007ffe9d90 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) [ 0.000000] ACPI: APIC 000000007ffe9de0 0001F8 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007ffe9fd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of physical nodes 8 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000130000000 [ 0.000000] Node 1 MemBase 0000000130000000 Limit 0000000230000000 [ 0.000000] Node 2 MemBase 0000000230000000 Limit 0000000330000000 [ 0.000000] Node 3 MemBase 0000000330000000 Limit 0000000430000000 [ 0.000000] Node 4 MemBase 0000000430000000 Limit 0000000530000000 [ 0.000000] Node 5 MemBase 0000000530000000 Limit 0000000630000000 [ 0.000000] Node 6 MemBase 0000000630000000 Limit 0000000830000000 [ 0.000000] Node 7 MemBase 0000000830000000 Limit 0000000a30000000 [ 0.000000] BSP APIC ID: 04 [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff] [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff] [ 0.000000] Initmem setup node 1 [mem 0x130000000-0x22fffffff] [ 0.000000] NODE_DATA [mem 0x22fffc000-0x22fffffff] [ 0.000000] Initmem setup node 2 [mem 0x230000000-0x32fffffff] [ 0.000000] NODE_DATA [mem 0x32fffc000-0x32fffffff] [ 0.000000] Initmem setup node 3 [mem 0x330000000-0x42fffffff] [ 0.000000] NODE_DATA [mem 0x42fffc000-0x42fffffff] [ 0.000000] Initmem setup node 4 [mem 0x430000000-0x52fffffff] [ 0.000000] NODE_DATA [mem 0x52fffc000-0x52fffffff] [ 0.000000] Initmem setup node 5 [mem 0x530000000-0x62fffffff] [ 0.000000] NODE_DATA [mem 0x62fffc000-0x62fffffff] [ 0.000000] Initmem setup node 6 [mem 0x630000000-0x82fffffff] [ 0.000000] NODE_DATA [mem 0x82fffc000-0x82fffffff] [ 0.000000] Initmem setup node 7 [mem 0x830000000-0xa2fffffff] [ 0.000000] NODE_DATA [mem 0xa2fffa000-0xa2fffdfff] [ 0.000000] [ffffea0004280000-ffffea00043fffff] potential offnode page_structs [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0 [ 0.000000] [ffffea0007a80000-ffffea0007bfffff] potential offnode page_structs [ 0.000000] [ffffea0004400000-ffffea0007bfffff] PMD -> [ffff88022be00000-ffff88022f5fffff] on node 1 [ 0.000000] [ffffea000b280000-ffffea000b3fffff] potential offnode page_structs [ 0.000000] [ffffea0007c00000-ffffea000b3fffff] PMD -> [ffff88032be00000-ffff88032f5fffff] on node 2 [ 0.000000] [ffffea000ea80000-ffffea000ebfffff] potential offnode page_structs [ 0.000000] [ffffea000b400000-ffffea000ebfffff] PMD -> [ffff88042be00000-ffff88042f5fffff] on node 3 [ 0.000000] [ffffea0012280000-ffffea00123fffff] potential offnode page_structs [ 0.000000] [ffffea000ec00000-ffffea00123fffff] PMD -> [ffff88052be00000-ffff88052f5fffff] on node 4 [ 0.000000] [ffffea0015a80000-ffffea0015bfffff] potential offnode page_structs [ 0.000000] [ffffea0012400000-ffffea0015bfffff] PMD -> [ffff88062be00000-ffff88062f5fffff] on node 5 [ 0.000000] [ffffea001ca80000-ffffea001cbfffff] potential offnode page_structs [ 0.000000] [ffffea0015c00000-ffffea001cbfffff] PMD -> [ffff880827e00000-ffff88082edfffff] on node 6 [ 0.000000] [ffffea001cc00000-ffffea0023bfffff] PMD -> [ffff880a27600000-ffff880a2e5fffff] on node 7 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0xa2fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00098fff] [ 0.000000] node 0: [mem 0x00100000-0x7ffdffff] [ 0.000000] node 0: [mem 0x80000000-0xcfbfffff] [ 0.000000] node 0: [mem 0x100000000-0x12fffffff] [ 0.000000] node 1: [mem 0x130000000-0x22fffffff] [ 0.000000] node 2: [mem 0x230000000-0x32fffffff] [ 0.000000] node 3: [mem 0x330000000-0x42fffffff] [ 0.000000] node 4: [mem 0x430000000-0x52fffffff] [ 0.000000] node 5: [mem 0x530000000-0x62fffffff] [ 0.000000] node 6: [mem 0x630000000-0x82fffffff] [ 0.000000] node 7: [mem 0x830000000-0xa2fffffff] [ 0.000000] On node 0 totalpages: 1047416 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3992 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11578 pages used for memmap [ 0.000000] DMA32 zone: 846816 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 3 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 4 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 5 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 6 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 [ 0.000000] On node 7 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x09] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0b] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0c] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0d] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0e] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0f] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x18] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x19] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x1a] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x1b] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x1c] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x1d] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1e] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1f] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000c9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000ca000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffe0000-0x7ffe9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffea000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfc00000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfff7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff80000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s79488 r8192 d22912 u524288 [ 0.000000] pcpu-alloc: s79488 r8192 d22912 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 [1] 04 05 06 07 [ 0.000000] pcpu-alloc: [2] 08 09 10 11 [3] 12 13 14 15 [ 0.000000] pcpu-alloc: [4] 16 17 18 19 [5] 20 21 22 23 [ 0.000000] pcpu-alloc: [6] 24 25 26 27 [7] 28 29 30 31 [ 0.000000] Built 8 zonelists in Zone order, mobility grouping on. Total pages: 10341233 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ d0000000 size 64 MB [ 0.000000] Node 1: aperture @ d0000000 size 64 MB [ 0.000000] Node 2: aperture @ d0000000 size 64 MB [ 0.000000] Node 3: aperture @ d0000000 size 64 MB [ 0.000000] Node 4: aperture @ d0000000 size 64 MB [ 0.000000] Node 5: aperture @ d0000000 size 64 MB [ 0.000000] Node 6: aperture @ d0000000 size 64 MB [ 0.000000] Node 7: aperture @ d0000000 size 64 MB [ 0.000000] Memory: 41283184K/41938400K available (4380K kernel code, 602K rwdata, 2336K rodata, 932K init, 896K bss, 655216K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:936 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1908.652 MHz processor [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 3817.30 BogoMIPS (lpj=7634608) [ 0.000321] pid_max: default: 32768 minimum: 301 [ 0.000571] ACPI: Core revision 20131218 [ 0.006496] ACPI: All ACPI Tables successfully acquired [ 0.015364] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.066263] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.089433] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.089780] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.092035] tseg: 00cfc00000 [ 0.092040] CPU: Physical Processor ID: 0 [ 0.092216] CPU: Processor Core ID: 0 [ 0.092368] mce: CPU supports 6 MCE banks [ 0.092523] LVT offset 0 assigned for vector 0xf9 [ 0.092677] process: using AMD E400 aware idle routine [ 0.092850] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 tlb_flushall_shift: 6 [ 0.093386] Freeing SMP alternatives memory: 20K (ffffffff81813000 - ffffffff81818000) [ 0.093743] Switched APIC routing to physical flat. [ 0.094337] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.134226] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 HE (fam: 10, model: 02, stepping: 03) [ 0.241927] Performance Events: AMD PMU driver. [ 0.242141] ... version: 0 [ 0.242275] ... bit width: 48 [ 0.242420] ... generic registers: 4 [ 0.242555] ... value mask: 0000ffffffffffff [ 0.242702] ... max period: 00007fffffffffff [ 0.242849] ... fixed-purpose events: 0 [ 0.242995] ... event mask: 000000000000000f [ 0.244522] x86: Booting SMP configuration: [ 0.244685] .... node #0, CPUs: #1 #2 #3 [ 0.285278] .... node #1, CPUs: #4 #5 #6 #7 [ 0.435190] .... node #2, CPUs: #8 #9 #10 #11 [ 0.587304] .... node #3, CPUs: #12 #13 #14 #15 [ 0.739390] .... node #4, CPUs: #16 #17 #18 #19 [ 0.894011] .... node #5, CPUs: #20 #21 #22 #23 [ 1.043834] .... node #6, CPUs: #24 #25 #26 #27 [ 1.195935] .... node #7, CPUs: #28 #29 #30 #31 [ 1.347559] x86: Booted up 8 nodes, 32 CPUs [ 1.347853] smpboot: Total of 32 processors activated (122181.18 BogoMIPS) [ 1.369852] devtmpfs: initialized [ 1.370694] PM: Registering ACPI NVS region [mem 0x7ffea000-0x7fffffff] (90112 bytes) [ 1.372164] NET: Registered protocol family 16 [ 1.372933] cpuidle: using governor ladder [ 1.373081] cpuidle: using governor menu [ 1.373235] node 0 link 1: io port [1000, 3fff] [ 1.373239] node 1 link 1: io port [b000, bfff] [ 1.373241] node 1 link 1: io port [9000, 9fff] [ 1.373245] TOM: 00000000d0000000 aka 3328M [ 1.373396] node 0 link 1: mmio [d4000000, dbffffff] [ 1.373399] node 1 link 1: mmio [dc000000, dc3fffff] [ 1.373402] node 0 link 1: mmio [a0000, bffff] [ 1.373405] node 0 link 1: mmio [e0000000, e7ffffff] [ 1.373407] node 1 link 1: mmio [e8000000, efffffff] [ 1.373410] TOM2: 0000000a30000000 aka 41728M [ 1.373562] bus: [bus 00-7f] on node 0 link 1 [ 1.373564] bus: 00 [io 0x0000-0x8fff] [ 1.373565] bus: 00 [io 0xc000-0xffff] [ 1.373566] bus: 00 [io 0xa000-0xafff] [ 1.373568] bus: 00 [mem 0xd0000000-0xdbffffff] [ 1.373569] bus: 00 [mem 0x000a0000-0x000bffff] [ 1.373570] bus: 00 [mem 0xdc400000-0xe7ffffff] [ 1.373571] bus: 00 [mem 0xf0000000-0xffffffff] [ 1.373573] bus: 00 [mem 0xa30000000-0xfcffffffff] [ 1.373574] bus: [bus 80-ff] on node 1 link 1 [ 1.373575] bus: 80 [io 0xb000-0xbfff] [ 1.373577] bus: 80 [io 0x9000-0x9fff] [ 1.373578] bus: 80 [mem 0xdc000000-0xdc3fffff] [ 1.373579] bus: 80 [mem 0xe8000000-0xefffffff] [ 1.373728] ACPI: bus type PCI registered [ 1.374098] PCI: Using configuration type 1 for base access [ 1.374247] PCI: Using configuration type 1 for extended access [ 1.390994] bio: create slab <bio-0> at 0 [ 1.392135] ACPI: Added _OSI(Module Device) [ 1.392291] ACPI: Added _OSI(Processor Device) [ 1.392427] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.392574] ACPI: Added _OSI(Processor Aggregator Device) [ 1.408763] ACPI: Interpreter enabled [ 1.408957] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 1.409307] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580) [ 1.409653] ACPI: (supports S0 S1 S4 S5) [ 1.409802] ACPI: Using IOAPIC for interrupt routing [ 1.410060] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.410544] ACPI: No dock devices found. [ 1.430889] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) [ 1.431100] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.431274] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.431798] acpi PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff]) [ 1.432174] PCI host bridge to bus 0000:00 [ 1.432328] pci_bus 0000:00: root bus resource [bus 00-07] [ 1.432482] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.432622] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] [ 1.432768] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.432911] pci_bus 0000:00: root bus resource [mem 0xd4000000-0xdbffffff] [ 1.433096] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 [ 1.433381] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 [ 1.433429] HPET not enabled in BIOS. You might try hpet=force boot option [ 1.433766] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 [ 1.433776] pci 0000:00:01.1: reg 0x10: [io 0x0000-0x001f] [ 1.433788] pci 0000:00:01.1: reg 0x20: [io 0xa000-0xa03f] [ 1.433815] pci 0000:00:01.1: reg 0x24: [io 0xa040-0xa07f] [ 1.433841] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 1.434054] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 [ 1.434071] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd4000fff] [ 1.434107] pci 0000:00:02.0: supports D1 D2 [ 1.434109] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.434199] pci 0000:00:02.0: System wakeup disabled by ACPI [ 1.434464] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 [ 1.434500] pci 0000:00:02.1: reg 0x10: [mem 0xd4001000-0xd40010ff] [ 1.434532] pci 0000:00:02.1: supports D1 D2 [ 1.434551] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.434663] pci 0000:00:02.1: System wakeup disabled by ACPI [ 1.434945] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a [ 1.434972] pci 0000:00:06.0: reg 0x20: [io 0x1400-0x140f] [ 1.435202] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 [ 1.435210] pci 0000:00:07.0: reg 0x10: [io 0x1440-0x1447] [ 1.435215] pci 0000:00:07.0: reg 0x14: [io 0x1434-0x1437] [ 1.435219] pci 0000:00:07.0: reg 0x18: [io 0x1438-0x143f] [ 1.435224] pci 0000:00:07.0: reg 0x1c: [io 0x1430-0x1433] [ 1.435229] pci 0000:00:07.0: reg 0x20: [io 0x1410-0x141f] [ 1.435233] pci 0000:00:07.0: reg 0x24: [mem 0xd4002000-0xd4002fff] [ 1.435462] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 [ 1.435479] pci 0000:00:08.0: reg 0x10: [io 0x1458-0x145f] [ 1.435484] pci 0000:00:08.0: reg 0x14: [io 0x144c-0x144f] [ 1.435488] pci 0000:00:08.0: reg 0x18: [io 0x1450-0x1457] [ 1.435493] pci 0000:00:08.0: reg 0x1c: [io 0x1448-0x144b] [ 1.435497] pci 0000:00:08.0: reg 0x20: [io 0x1420-0x142f] [ 1.435502] pci 0000:00:08.0: reg 0x24: [mem 0xd4003000-0xd4003fff] [ 1.435722] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401 [ 1.435829] pci 0000:00:09.0: System wakeup disabled by ACPI [ 1.436093] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000 [ 1.436116] pci 0000:00:0a.0: reg 0x10: [mem 0xd4004000-0xd4004fff] [ 1.436126] pci 0000:00:0a.0: reg 0x14: [io 0x1460-0x1467] [ 1.436154] pci 0000:00:0a.0: supports D1 D2 [ 1.436173] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.436289] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 1.436552] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 [ 1.436591] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.436804] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 [ 1.436856] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.437068] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 [ 1.437128] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.437358] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 [ 1.437401] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.437662] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 1.437893] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 1.438096] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 1.438300] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 1.438528] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 1.438729] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 1.438955] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 1.439162] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 1.439360] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 1.439589] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 1.439798] pci 0000:00:1a.0: [1022:1200] type 00 class 0x060000 [ 1.440048] pci 0000:00:1a.1: [1022:1201] type 00 class 0x060000 [ 1.440264] pci 0000:00:1a.2: [1022:1202] type 00 class 0x060000 [ 1.440495] pci 0000:00:1a.3: [1022:1203] type 00 class 0x060000 [ 1.440686] pci 0000:00:1a.4: [1022:1204] type 00 class 0x060000 [ 1.440866] pci 0000:00:1b.0: [1022:1200] type 00 class 0x060000 [ 1.441110] pci 0000:00:1b.1: [1022:1201] type 00 class 0x060000 [ 1.441332] pci 0000:00:1b.2: [1022:1202] type 00 class 0x060000 [ 1.441556] pci 0000:00:1b.3: [1022:1203] type 00 class 0x060000 [ 1.441799] pci 0000:00:1b.4: [1022:1204] type 00 class 0x060000 [ 1.442004] pci 0000:00:1c.0: [1022:1200] type 00 class 0x060000 [ 1.442221] pci 0000:00:1c.1: [1022:1201] type 00 class 0x060000 [ 1.442438] pci 0000:00:1c.2: [1022:1202] type 00 class 0x060000 [ 1.442663] pci 0000:00:1c.3: [1022:1203] type 00 class 0x060000 [ 1.442914] pci 0000:00:1c.4: [1022:1204] type 00 class 0x060000 [ 1.443158] pci 0000:00:1d.0: [1022:1200] type 00 class 0x060000 [ 1.443403] pci 0000:00:1d.1: [1022:1201] type 00 class 0x060000 [ 1.443654] pci 0000:00:1d.2: [1022:1202] type 00 class 0x060000 [ 1.443862] pci 0000:00:1d.3: [1022:1203] type 00 class 0x060000 [ 1.444097] pci 0000:00:1d.4: [1022:1204] type 00 class 0x060000 [ 1.444323] pci 0000:00:1e.0: [1022:1200] type 00 class 0x060000 [ 1.444570] pci 0000:00:1e.1: [1022:1201] type 00 class 0x060000 [ 1.444778] pci 0000:00:1e.2: [1022:1202] type 00 class 0x060000 [ 1.444983] pci 0000:00:1e.3: [1022:1203] type 00 class 0x060000 [ 1.445214] pci 0000:00:1e.4: [1022:1204] type 00 class 0x060000 [ 1.445439] pci 0000:00:1f.0: [1022:1200] type 00 class 0x060000 [ 1.445666] pci 0000:00:1f.1: [1022:1201] type 00 class 0x060000 [ 1.445887] pci 0000:00:1f.2: [1022:1202] type 00 class 0x060000 [ 1.446075] pci 0000:00:1f.3: [1022:1203] type 00 class 0x060000 [ 1.446303] pci 0000:00:1f.4: [1022:1204] type 00 class 0x060000 [ 1.446634] pci 0000:01:06.0: [8086:1076] type 00 class 0x020000 [ 1.446648] pci 0000:01:06.0: reg 0x10: [mem 0xd4120000-0xd413ffff] [ 1.446673] pci 0000:01:06.0: reg 0x14: [mem 0xd4100000-0xd411ffff] [ 1.446683] pci 0000:01:06.0: reg 0x18: [io 0x2080-0x20bf] [ 1.446713] pci 0000:01:06.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.446747] pci 0000:01:06.0: PME# supported from D0 D3hot D3cold [ 1.446877] pci 0000:01:09.0: [18ca:0020] type 00 class 0x030000 [ 1.446896] pci 0000:01:09.0: reg 0x10: [mem 0xd8000000-0xdbffffff pref] [ 1.446903] pci 0000:01:09.0: reg 0x14: [mem 0xd4140000-0xd417ffff] [ 1.446917] pci 0000:01:09.0: reg 0x18: [io 0x2000-0x207f] [ 1.446959] pci 0000:01:09.0: supports D1 D2 [ 1.447115] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode) [ 1.447299] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] [ 1.447302] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff] [ 1.447305] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff pref] [ 1.447308] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.447310] pci 0000:00:09.0: bridge window [io 0x0d00-0x3fff] (subtractive decode) [ 1.447313] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.447316] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xdbffffff] (subtractive decode) [ 1.447433] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 1.447682] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 1.447941] pci 0000:00:0d.0: PCI bridge to [bus 05] [ 1.448196] pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07] (conflicts with (null) [bus 00-07]) [ 1.448212] pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400 [ 1.448224] pci 0000:0a:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.448243] pci 0000:0a:00.0: reg 0x14: [mem 0xd4210000-0xd4213fff 64bit] [ 1.448268] pci 0000:0a:00.0: reg 0x1c: [mem 0xd4200000-0xd420ffff 64bit] [ 1.448281] pci 0000:0a:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 1.448352] pci 0000:0a:00.0: supports D1 D2 [ 1.448484] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.448750] pci 0000:00:0e.0: PCI bridge to [bus 0a] [ 1.448902] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] [ 1.448905] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff] [ 1.449878] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 [ 1.450399] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 [ 1.450925] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 [ 1.451430] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. [ 1.451978] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. [ 1.452520] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. [ 1.453070] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 [ 1.453577] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 [ 1.454098] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0 [ 1.454608] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 1.455153] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. [ 1.455730] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 1.456282] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 [ 1.456801] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. [ 1.457339] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 1.458027] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) [ 1.458186] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.458347] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.458976] acpi PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff]) [ 1.459353] PCI host bridge to bus 0000:80 [ 1.459502] pci_bus 0000:80: root bus resource [bus 80-ff] [ 1.459646] pci_bus 0000:80: root bus resource [io 0xb000-0xffff] [ 1.459798] pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff] [ 1.459941] pci_bus 0000:80: root bus resource [mem 0xdc000000-0xdc3fffff] [ 1.460120] pci 0000:80:00.0: [10de:005e] type 00 class 0x058000 [ 1.460363] pci 0000:80:01.0: [10de:00d3] type 00 class 0x058000 [ 1.460575] pci 0000:80:07.0: [10de:0054] type 00 class 0x010185 [ 1.460584] pci 0000:80:07.0: reg 0x10: [io 0xb030-0xb037] [ 1.460594] pci 0000:80:07.0: reg 0x14: [io 0xb024-0xb027] [ 1.460599] pci 0000:80:07.0: reg 0x18: [io 0xb028-0xb02f] [ 1.460603] pci 0000:80:07.0: reg 0x1c: [io 0xb020-0xb023] [ 1.460608] pci 0000:80:07.0: reg 0x20: [io 0xb000-0xb00f] [ 1.460614] pci 0000:80:07.0: reg 0x24: [mem 0xdc000000-0xdc000fff] [ 1.460770] pci 0000:80:08.0: [10de:0055] type 00 class 0x010185 [ 1.460782] pci 0000:80:08.0: reg 0x10: [io 0xb048-0xb04f] [ 1.460801] pci 0000:80:08.0: reg 0x14: [io 0xb03c-0xb03f] [ 1.460806] pci 0000:80:08.0: reg 0x18: [io 0xb040-0xb047] [ 1.460811] pci 0000:80:08.0: reg 0x1c: [io 0xb038-0xb03b] [ 1.460816] pci 0000:80:08.0: reg 0x20: [io 0xb010-0xb01f] [ 1.460821] pci 0000:80:08.0: reg 0x24: [mem 0xdc001000-0xdc001fff] [ 1.461006] pci 0000:80:0a.0: [10de:0057] type 00 class 0x068000 [ 1.461020] pci 0000:80:0a.0: reg 0x10: [mem 0xdc002000-0xdc002fff] [ 1.461029] pci 0000:80:0a.0: reg 0x14: [io 0xb050-0xb057] [ 1.461056] pci 0000:80:0a.0: supports D1 D2 [ 1.461075] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.461162] pci 0000:80:0a.0: System wakeup disabled by ACPI [ 1.461440] pci 0000:80:0b.0: [10de:005d] type 01 class 0x060400 [ 1.461521] pci 0000:80:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.461738] pci 0000:80:0c.0: [10de:005d] type 01 class 0x060400 [ 1.461815] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.462000] pci 0000:80:0d.0: [10de:005d] type 01 class 0x060400 [ 1.462074] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.462237] pci 0000:80:0e.0: [10de:005d] type 01 class 0x060400 [ 1.462281] pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.462568] pci 0000:80:0b.0: PCI bridge to [bus 81-85] [ 1.462839] pci 0000:80:0c.0: PCI bridge to [bus 86-8a] [ 1.463108] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f] [ 1.463382] pci 0000:80:0e.0: PCI bridge to [bus 90-94] [ 1.464105] vgaarb: device added: PCI:0000:01:09.0,decodes=io+mem,owns=io+mem,locks=none [ 1.464264] vgaarb: loaded [ 1.464411] vgaarb: bridge control possible 0000:01:09.0 [ 1.465372] SCSI subsystem initialized [ 1.465853] libata version 3.00 loaded. [ 1.465874] ACPI: bus type USB registered [ 1.466161] usbcore: registered new interface driver usbfs [ 1.466376] usbcore: registered new interface driver hub [ 1.466625] usbcore: registered new device driver usb [ 1.466955] PCI: Using ACPI for IRQ routing [ 1.467104] PCI: pci_cache_line_size set to 64 bytes [ 1.467117] pci 0000:00:01.1: no compatible bridge window for [io 0xa000-0xa03f] [ 1.467277] pci 0000:00:01.1: no compatible bridge window for [io 0xa040-0xa07f] [ 1.467574] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff] [ 1.467578] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff] [ 1.467580] e820: reserve RAM buffer [mem 0xcfc00000-0xcfffffff] [ 1.468399] Switched to clocksource refined-jiffies [ 1.482765] pnp: PnP ACPI init [ 1.482968] ACPI: bus type PNP registered [ 1.483649] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved [ 1.483832] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.483988] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.484141] system 00:00: [mem 0xfefff000-0xfeffffff] has been reserved [ 1.484297] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.484905] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.485418] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.485888] pnp 00:03: [dma 2] [ 1.486003] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.486555] pnp 00:04: [dma 1] [ 1.486786] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 1.486921] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.487049] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.487552] system 00:07: [io 0x8000-0x807f] could not be reserved [ 1.487699] system 00:07: [io 0x8080-0x80ff] has been reserved [ 1.487853] system 00:07: [io 0x8400-0x847f] has been reserved [ 1.488004] system 00:07: [io 0x8480-0x84ff] has been reserved [ 1.488155] system 00:07: [io 0x8800-0x887f] has been reserved [ 1.488305] system 00:07: [io 0x8880-0x88ff] has been reserved [ 1.488458] system 00:07: [io 0xa000-0xa03f] has been reserved [ 1.488611] system 00:07: [io 0xa040-0xa07f] has been reserved [ 1.488771] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.488814] pnp 00:08: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.1 BAR 0 [io 0x0000-0x001f] [ 1.489083] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f] [ 1.489345] pnp 00:08: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f] [ 1.489596] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f] [ 1.489865] pnp 00:08: disabling [io 0x0022-0x003f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f] [ 1.490268] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 1.490423] system 00:08: [io 0x0400-0x045e] has been reserved [ 1.490577] system 00:08: [io 0x9000-0x907f] has been reserved [ 1.490730] system 00:08: [io 0x9080-0x90ff] has been reserved [ 1.490885] system 00:08: [io 0x9200-0x927f] has been reserved [ 1.491035] system 00:08: [io 0x9280-0x92ff] has been reserved [ 1.491185] system 00:08: [io 0x9400-0x947f] has been reserved [ 1.491330] system 00:08: [io 0x9480-0x94ff] has been reserved [ 1.491482] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.491510] pnp 00:09: [dma 4] [ 1.491628] pnp 00:09: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.491717] pnp 00:0a: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.491819] pnp 00:0b: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.491916] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.492527] pnp: PnP ACPI: found 13 devices [ 1.492678] ACPI: bus type PNP unregistered [ 1.497637] Switched to clocksource acpi_pm [ 1.497844] pci 0000:00:0e.0: BAR 15: assigned [mem 0xd4300000-0xd43fffff pref] [ 1.498002] pci 0000:00:01.1: BAR 4: assigned [io 0x1000-0x103f] [ 1.498162] pci 0000:00:01.1: BAR 5: assigned [io 0x1040-0x107f] [ 1.498348] pci 0000:00:01.1: BAR 0: assigned [io 0x1080-0x109f] [ 1.501940] pci 0000:01:06.0: BAR 6: assigned [mem 0xd4180000-0xd419ffff pref] [ 1.502098] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.502248] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] [ 1.502402] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff] [ 1.502557] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff pref] [ 1.502705] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 1.502859] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 1.503013] pci 0000:00:0d.0: PCI bridge to [bus 05] [ 1.503167] pci 0000:0a:00.0: BAR 6: assigned [mem 0xd4300000-0xd43fffff pref] [ 1.503324] pci 0000:00:0e.0: PCI bridge to [bus 0a] [ 1.503475] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] [ 1.503630] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff] [ 1.503783] pci 0000:00:0e.0: bridge window [mem 0xd4300000-0xd43fffff pref] [ 1.503940] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.503942] pci_bus 0000:00: resource 5 [io 0x0d00-0x3fff] [ 1.503945] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.503947] pci_bus 0000:00: resource 7 [mem 0xd4000000-0xdbffffff] [ 1.503950] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.503952] pci_bus 0000:01: resource 1 [mem 0xd4100000-0xd41fffff] [ 1.503955] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref] [ 1.503957] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 1.503959] pci_bus 0000:01: resource 5 [io 0x0d00-0x3fff] [ 1.503961] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 1.503963] pci_bus 0000:01: resource 7 [mem 0xd4000000-0xdbffffff] [ 1.503967] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff] [ 1.503969] pci_bus 0000:0a: resource 1 [mem 0xd4200000-0xd42fffff] [ 1.503971] pci_bus 0000:0a: resource 2 [mem 0xd4300000-0xd43fffff pref] [ 1.503988] pci 0000:80:0b.0: PCI bridge to [bus 81-85] [ 1.504145] pci 0000:80:0c.0: PCI bridge to [bus 86-8a] [ 1.504305] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f] [ 1.504458] pci 0000:80:0e.0: PCI bridge to [bus 90-94] [ 1.504613] pci_bus 0000:80: resource 4 [io 0xb000-0xffff] [ 1.504616] pci_bus 0000:80: resource 5 [mem 0x000a0000-0x000bffff] [ 1.504618] pci_bus 0000:80: resource 6 [mem 0xdc000000-0xdc3fffff] [ 1.505190] NET: Registered protocol family 2 [ 1.506699] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.510133] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.511058] TCP: Hash tables configured (established 524288 bind 65536) [ 1.511355] TCP: reno registered [ 1.511641] UDP hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.512813] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.514485] NET: Registered protocol family 1 [ 1.515226] RPC: Registered named UNIX socket transport module. [ 1.515381] RPC: Registered udp transport module. [ 1.515528] RPC: Registered tcp transport module. [ 1.515691] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.516343] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23 [ 1.774348] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 1.774659] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.774863] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 1.775011] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.775215] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.775373] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 1.775517] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.775733] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.775886] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 1.776040] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.776231] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.776389] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 1.776543] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.776832] pci 0000:01:09.0: Boot video device [ 1.776944] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.777101] pci 0000:80:0b.0: Found disabled HT MSI Mapping [ 1.777260] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.777443] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.777607] pci 0000:80:0c.0: Found disabled HT MSI Mapping [ 1.777752] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.778095] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.778252] pci 0000:80:0d.0: Found disabled HT MSI Mapping [ 1.778411] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.778612] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.778767] pci 0000:80:0e.0: Found disabled HT MSI Mapping [ 1.778911] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.779073] PCI: CLS 64 bytes, default 64 [ 1.782156] PCI-DMA: Disabling AGP. [ 1.783625] PCI-DMA: aperture base @ d0000000 size 65536 KB [ 1.783803] init_memory_mapping: [mem 0xd0000000-0xd3ffffff] [ 1.783954] [mem 0xd0000000-0xd3ffffff] page 2M [ 1.783970] PCI-DMA: using GART IOMMU. [ 1.784120] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.793012] Simple Boot Flag at 0x37 set to 0x80 [ 1.796176] LVT offset 1 assigned for vector 0x400 [ 1.796408] IBS: LVT offset 1 assigned [ 1.796672] perf: AMD IBS detected (0x00000007) [ 1.807124] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 1.844825] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.849170] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.849627] msgmni has been set to 32768 [ 1.850507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.850673] io scheduler noop registered [ 1.850836] io scheduler deadline registered [ 1.851155] io scheduler cfq registered (default) [ 1.851723] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 1.851985] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X [ 1.852220] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X [ 1.852371] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X [ 1.852636] pcieport 0000:80:0b.0: irq 44 for MSI/MSI-X [ 1.852839] pcieport 0000:80:0c.0: irq 45 for MSI/MSI-X [ 1.852974] pcieport 0000:80:0d.0: irq 46 for MSI/MSI-X [ 1.853132] pcieport 0000:80:0e.0: irq 47 for MSI/MSI-X [ 1.896809] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.917411] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.938277] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.940110] Linux agpgart interface v0.103 [ 1.940637] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.940829] ACPI: Power Button [PWRB] [ 1.941158] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.941319] ACPI: Power Button [PWRF] [ 1.941702] ACPI: acpi_idle registered with cpuidle [ 1.946856] Floppy drive(s): fd0 is 1.44M [ 1.950659] brd: module loaded [ 1.953049] loop: module loaded [ 1.954351] sata_nv 0000:00:07.0: version 3.5 [ 1.954860] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 [ 1.955957] scsi0 : sata_nv [ 1.956556] scsi1 : sata_nv [ 1.956893] ata1: SATA max UDMA/133 cmd 0x1440 ctl 0x1434 bmdma 0x1410 irq 21 [ 1.957047] ata2: SATA max UDMA/133 cmd 0x1438 ctl 0x1430 bmdma 0x1418 irq 21 [ 1.957534] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 [ 1.959087] scsi2 : sata_nv [ 1.959571] scsi3 : sata_nv [ 1.959930] ata3: SATA max UDMA/133 cmd 0x1458 ctl 0x144c bmdma 0x1420 irq 20 [ 1.960089] ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x1448 bmdma 0x1428 irq 20 [ 1.960659] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 19 [ 1.961735] scsi4 : sata_nv [ 1.962324] scsi5 : sata_nv [ 1.962645] ata5: SATA max UDMA/133 cmd 0xb030 ctl 0xb024 bmdma 0xb000 irq 19 [ 1.962821] ata6: SATA max UDMA/133 cmd 0xb028 ctl 0xb020 bmdma 0xb008 irq 19 [ 1.963216] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18 [ 1.964109] scsi6 : sata_nv [ 1.965417] scsi7 : sata_nv [ 1.965858] ata7: SATA max UDMA/133 cmd 0xb048 ctl 0xb03c bmdma 0xb010 irq 18 [ 1.966302] FDC 0 is a post-1991 82077 [ 1.966504] ata8: SATA max UDMA/133 cmd 0xb040 ctl 0xb038 bmdma 0xb018 irq 18 [ 1.966837] pata_amd 0000:00:06.0: version 0.4.1 [ 1.968686] scsi8 : pata_amd [ 1.969150] scsi9 : pata_amd [ 1.969494] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1400 irq 14 [ 1.969649] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1408 irq 15 [ 1.970051] tun: Universal TUN/TAP device driver, 1.6 [ 1.970383] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.970902] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.971058] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.422709] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.426719] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.430688] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.431341] ata1.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.431541] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.434726] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.435334] ata3.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.435523] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.439305] ata5.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.439513] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.443253] ata7.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.443415] ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.447283] ata1.00: configured for UDMA/133 [ 2.447749] scsi 0:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 2.448235] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.448431] sd 0:0:0:0: [sda] Write Protect is off [ 2.448577] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.448595] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.448961] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.449466] e1000 0000:01:06.0 eth0: (PCI:33MHz:32-bit) 00:e0:81:b0:4d:69 [ 2.449623] e1000 0000:01:06.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.449915] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.450422] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 2.451281] ata3.00: configured for UDMA/133 [ 2.451651] sda: sda1 sda2 sda3 [ 2.452629] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.455234] ata5.00: configured for UDMA/133 [ 2.459269] ata7.00: configured for UDMA/133 [ 2.791073] tsc: Refined TSC clocksource calibration: 1908.795 MHz [ 2.915198] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.923730] ata2.00: ATA-6: ST31000340NS, SN04, max UDMA/133 [ 2.923887] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.939719] ata2.00: configured for UDMA/133 [ 2.940021] scsi 1:0:0:0: Direct-Access ATA ST31000340NS SN04 PQ: 0 ANSI: 5 [ 2.940554] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.940702] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.940963] scsi 2:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 2.941003] sd 1:0:0:0: [sdb] Write Protect is off [ 2.941006] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.941065] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.941874] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.942000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.942301] sd 2:0:0:0: [sdc] Write Protect is off [ 2.942487] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.942561] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.958495] sdb: unknown partition table [ 2.959273] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.959555] sdc: unknown partition table [ 2.960145] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.975972] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b0:4d:67 [ 2.976147] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 2.976584] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 [ 3.407686] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.416227] ata4.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 3.416378] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.432262] ata4.00: configured for UDMA/133 [ 3.432556] scsi 3:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.433066] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.433186] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.433504] sd 3:0:0:0: [sdd] Write Protect is off [ 3.433574] scsi 4:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.433793] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.433820] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.434055] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.434111] sd 4:0:0:0: [sde] Write Protect is off [ 3.434114] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.434134] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.434199] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.450927] sde: sde1 sde2 sde3 [ 3.450983] sdd: unknown partition table [ 3.451223] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.452204] sd 4:0:0:0: [sde] Attached SCSI disk [ 3.500431] forcedeth 0000:80:0a.0: ifname eth2, PHY OUI 0x5043 @ 1, addr 00:e0:81:b0:4d:68 [ 3.500638] forcedeth 0000:80:0a.0: highdma csum gbit lnktim desc-v3 [ 3.501421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.501618] ehci-pci: EHCI PCI platform driver [ 3.501931] ehci-pci 0000:00:02.1: EHCI Host Controller [ 3.502215] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 3.502380] ehci-pci 0000:00:02.1: debug port 1 [ 3.502563] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 3.502601] ehci-pci 0000:00:02.1: irq 22, io mem 0xd4001000 [ 3.511780] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 3.512567] hub 1-0:1.0: USB hub found [ 3.512742] hub 1-0:1.0: 10 ports detected [ 3.513624] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.513785] ohci-pci: OHCI PCI platform driver [ 3.514052] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 3.514363] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.514592] ohci-pci 0000:00:02.0: irq 23, io mem 0xd4000000 [ 3.570265] hub 2-0:1.0: USB hub found [ 3.570424] hub 2-0:1.0: 10 ports detected [ 3.570921] uhci_hcd: USB Universal Host Controller Interface driver [ 3.571345] usbcore: registered new interface driver usblp [ 3.571587] usbcore: registered new interface driver usb-storage [ 3.572109] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.574835] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.575028] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.575514] mousedev: PS/2 mouse device common for all mice [ 3.576831] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.578124] usbcore: registered new interface driver usbhid [ 3.578264] usbhid: USB HID core driver [ 3.578500] oprofile: AMD IBS detected (0x00000007) [ 3.578650] oprofile: using NMI interrupt. [ 3.578824] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.579579] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.580027] arp_tables: (C) 2002 David S. Miller [ 3.580182] TCP: cubic registered [ 3.580330] NET: Registered protocol family 17 [ 3.584827] registered taskstats version 1 [ 3.585969] console [netcon0] enabled [ 3.586118] netconsole: network logging started [ 3.586703] acpi-cpufreq: overriding BIOS provided _PSD data [ 3.636492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.792278] Switched to clocksource tsc [ 3.900032] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.908596] ata6.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 3.908757] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.924600] ata6.00: configured for UDMA/133 [ 3.924977] scsi 5:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.925480] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.925658] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 3.925770] sd 5:0:0:0: [sdf] Write Protect is off [ 3.925773] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 3.925827] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.926502] scsi 6:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.927016] sd 6:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.927143] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 3.927463] sd 6:0:0:0: [sdg] Write Protect is off [ 3.927653] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 3.927707] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.940521] sdg: unknown partition table [ 3.941148] sd 6:0:0:0: [sdg] Attached SCSI disk [ 3.943918] sdf: sdf1 sdf2 sdf3 [ 3.944821] sd 5:0:0:0: [sdf] Attached SCSI disk [ 4.200347] usb 2-1: new low-speed USB device number 2 using ohci-pci [ 4.202456] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 4.392526] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.416816] ata8.00: ATA-7: Hitachi HUA721010KLA330, GKAOA70M, max UDMA/133 [ 4.416989] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.432812] ata8.00: configured for UDMA/133 [ 4.433118] scsi 7:0:0:0: Direct-Access ATA Hitachi HUA72101 GKAO PQ: 0 ANSI: 5 [ 4.433631] sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.433771] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 4.434059] sd 7:0:0:0: [sdh] Write Protect is off [ 4.434246] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 4.434297] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.446707] sdh: unknown partition table [ 4.447242] sd 7:0:0:0: [sdh] Attached SCSI disk [ 4.621062] ata10.00: ATAPI: TEAC DV-516GB, HT13, max UDMA/33 [ 4.621270] ata10: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13) [ 4.661061] ata10.00: configured for UDMA/33 [ 4.663152] scsi 9:0:0:0: CD-ROM TEAC DV-516GB HT13 PQ: 0 ANSI: 5 [ 4.670062] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 4.670242] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.670668] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 4.670877] sr 9:0:0:0: Attached scsi generic sg8 type 5 [ 4.679466] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 4.687772] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 4.709060] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.709231] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 4.726151] devtmpfs: mounted [ 4.727291] Freeing unused kernel memory: 932K (ffffffff8172a000 - ffffffff81813000) [ 5.650312] random: nonblocking pool is initialized [ 5.930225] hid-generic 0003:051D:0002.0001: device has no listeners, quitting [ 6.371047] systemd-udevd[1975]: starting version 216 [ 6.794605] Fusion MPT base driver 3.04.20 [ 6.794611] Copyright (c) 1999-2008 LSI Corporation [ 6.795032] systemd-udevd[2051]: renamed network interface eth1 to enp0s10 [ 6.813186] Fusion MPT FC Host driver 3.04.20 [ 6.813892] mptbase: ioc0: Initiating bringup [ 6.818783] kvm: Nested Virtualization enabled [ 6.818804] kvm: Nested Paging enabled [ 6.823148] systemd-udevd[2055]: renamed network interface eth2 to enp128s10 [ 6.855161] systemd-udevd[1997]: renamed network interface eth0 to enp1s6 [ 7.371502] ioc0: LSIFC949E: Capabilities={Initiator,Target,LAN} [ 8.324975] scsi10 : ioc0: LSIFC949E, FwRev=01031400h, Ports=1, MaxQ=1023, IRQ=17 [ 8.325568] mptfc: ioc0: FC Link Established, Speed = 4 Gbps [ 8.326385] scsi 10:0:0:0: Direct-Access ES-6600S Backup R001 PQ: 0 ANSI: 5 [ 8.326722] sd 10:0:0:0: Attached scsi generic sg9 type 0 [ 8.326729] sd 10:0:0:0: [sdi] 3906249216 512-byte logical blocks: (1.99 TB/1.81 TiB) [ 8.326945] sd 10:0:0:0: [sdi] Write Protect is off [ 8.326953] sd 10:0:0:0: [sdi] Mode Sense: bf 00 00 08 [ 8.327087] scsi 10:0:0:1: Direct-Access ES-6600S Data R001 PQ: 0 ANSI: 5 [ 8.327091] sd 10:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.327146] mptscsih: ioc0: [10:0:0:0] FCP_ResponseInfo=02000000h [ 8.327412] sd 10:0:0:1: [sdj] 15624996864 512-byte logical blocks: (7.99 TB/7.27 TiB) [ 8.327439] sd 10:0:0:1: Attached scsi generic sg10 type 0 [ 8.327628] sd 10:0:0:1: [sdj] Write Protect is off [ 8.327632] sd 10:0:0:1: [sdj] Mode Sense: bf 00 00 08 [ 8.327750] sd 10:0:0:1: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.327783] scsi 10:0:0:2: Direct-Access ES-6600S Systems R001 PQ: 0 ANSI: 5 [ 8.327803] mptscsih: ioc0: [10:0:0:1] FCP_ResponseInfo=02000000h [ 8.328224] sdi: sdi1 [ 8.328340] sd 10:0:0:2: [sdk] 7812498432 512-byte logical blocks: (3.99 TB/3.63 TiB) [ 8.328502] sd 10:0:0:2: Attached scsi generic sg11 type 0 [ 8.328599] sd 10:0:0:2: [sdk] Write Protect is off [ 8.328603] sd 10:0:0:2: [sdk] Mode Sense: bf 00 00 08 [ 8.328723] sd 10:0:0:2: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.328777] mptscsih: ioc0: [10:0:0:2] FCP_ResponseInfo=02000000h [ 8.328908] sdj: unknown partition table [ 8.329248] sd 10:0:0:0: [sdi] Attached SCSI disk [ 8.330099] sdk: unknown partition table [ 8.330188] sd 10:0:0:1: [sdj] Attached SCSI disk [ 8.330799] sd 10:0:0:2: [sdk] Attached SCSI disk [ 8.966271] EXT4-fs (sda2): re-mounted. Opts: (null) [ 10.923090] end_request: I/O error, dev fd0, sector 0 [ 10.923097] floppy: error -5 while reading block 0 [ 10.947092] end_request: I/O error, dev fd0, sector 0 [ 10.947104] floppy: error -5 while reading block 0 [ 11.134577] bio: create slab <bio-1> at 1 [ 11.845894] Bridge firewalling registered [ 11.868430] device enp1s6 entered promiscuous mode [ 11.878199] device br0 entered promiscuous mode [ 11.889674] e1000: enp1s6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 11.889801] br0: port 1(enp1s6) entered forwarding state [ 11.889817] br0: port 1(enp1s6) entered forwarding state
> >> Actually, this machine caused more problems, because I was not able to >> get it run with fedora, debian or ubuntu but I am somewhat sure that has >> to do with grub2 and now I am (again) running Gentoo on it, booting with >> legacy grub. So, I hope that has nothing to do with the PCI FC Adapter >> not being recognized. >> >> I bisected this PCI problem to commit 1820ffdccb9b4398 (PCI: Make sure >> bus number resources stay within their parents bounds). >> >> With this commit the "bridge configuration invalid..." message is >> triggered; I'll attach the dmesg output. >> >> >> Please note: unfortunately, I am in a hurry to get the VMs on that >> server back running this afternoon and then cannot easily test fixes >> that need reboots. It would be nice if someone could reproduce this >> problem on a test machine, otherwise I have to test at night or on >> weekends... >> >> Dirk >> >> ------------------------------------------------------------------------ >> [ 0.000000] Linux version 3.14.0-rc1-00005-g1820ffd (root@quad) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #18 SMP Wed Sep 3 12:33:21 CEST 2014 >> [ 0.000000] Command line: root=/dev/sda2 >> [ 0.000000] e820: BIOS-provided physical RAM map: >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable >> [ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000000ca000-0x00000000000fffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable >> [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007ffe9fff] ACPI data >> [ 0.000000] BIOS-e820: [mem 0x000000007ffea000-0x000000007fffffff] ACPI NVS >> [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000cfbfffff] usable >> [ 0.000000] BIOS-e820: [mem 0x00000000cfc00000-0x00000000cfffffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000a2fffffff] usable >> [ 0.000000] NX (Execute Disable) protection: active >> [ 0.000000] SMBIOS 2.4 present. >> [ 0.000000] DMI: NVIDIA CK8 /Tyan Transport VX50-B4985, BIOS TYAN Transport VX50 B4985 BIOS V3.01.B30 11/27/2009 >> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved >> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable >> [ 0.000000] No AGP bridge found >> [ 0.000000] e820: last_pfn = 0xa30000 max_arch_pfn = 0x400000000 >> [ 0.000000] MTRR default type: uncachable >> [ 0.000000] MTRR fixed ranges enabled: >> [ 0.000000] 00000-9FFFF write-back >> [ 0.000000] A0000-BFFFF uncachable >> [ 0.000000] C0000-D3FFF write-protect >> [ 0.000000] D4000-E3FFF uncachable >> [ 0.000000] E4000-FFFFF write-protect >> [ 0.000000] MTRR variable ranges enabled: >> [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back >> [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back >> [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back >> [ 0.000000] 3 disabled >> [ 0.000000] 4 disabled >> [ 0.000000] 5 disabled >> [ 0.000000] 6 disabled >> [ 0.000000] 7 disabled >> [ 0.000000] TOM2: 0000000a30000000 aka 41728M >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 >> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved >> [ 0.000000] e820: last_pfn = 0xcfc00 max_arch_pfn = 0x400000000 >> [ 0.000000] found SMP MP-table at [mem 0x000f7770-0x000f777f] mapped at [ffff8800000f7770] >> [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576 >> [ 0.000000] Using GB pages for direct mapping >> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] >> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k >> [ 0.000000] BRK [0x018f5000, 0x018f5fff] PGTABLE >> [ 0.000000] BRK [0x018f6000, 0x018f6fff] PGTABLE >> [ 0.000000] BRK [0x018f7000, 0x018f7fff] PGTABLE >> [ 0.000000] init_memory_mapping: [mem 0xa2fe00000-0xa2fffffff] >> [ 0.000000] [mem 0xa2fe00000-0xa2fffffff] page 2M >> [ 0.000000] BRK [0x018f8000, 0x018f8fff] PGTABLE >> [ 0.000000] init_memory_mapping: [mem 0xa2c000000-0xa2fdfffff] >> [ 0.000000] [mem 0xa2c000000-0xa2fdfffff] page 2M >> [ 0.000000] init_memory_mapping: [mem 0xa00000000-0xa2bffffff] >> [ 0.000000] [mem 0xa00000000-0xa2bffffff] page 2M >> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7ffdffff] >> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k >> [ 0.000000] [mem 0x00200000-0x7fdfffff] page 2M >> [ 0.000000] [mem 0x7fe00000-0x7ffdffff] page 4k >> [ 0.000000] init_memory_mapping: [mem 0x80000000-0xcfbfffff] >> [ 0.000000] [mem 0x80000000-0xbfffffff] page 1G >> [ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M >> [ 0.000000] BRK [0x018f9000, 0x018f9fff] PGTABLE >> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x9ffffffff] >> [ 0.000000] [mem 0x100000000-0x9ffffffff] page 1G >> [ 0.000000] ACPI: RSDP 00000000000f77f0 000014 (v00 PTLTD ) >> [ 0.000000] ACPI: RSDT 000000007ffe0aab 000038 (v01 PTLTD RSDT 06040000 LTP 00000000) >> [ 0.000000] ACPI: FACP 000000007ffe4c98 000074 (v01 NVIDIA CK8S 06040000 PTL_ 000F4240) >> [ 0.000000] ACPI: DSDT 000000007ffe0ae3 0041B5 (v01 NVIDIA CK8 06040000 MSFT 0100000E) >> [ 0.000000] ACPI: FACS 000000007ffeafc0 000040 >> [ 0.000000] ACPI: SSDT 000000007ffe4d0c 005084 (v01 AMD POWERNOW 06040000 AMD 00000001) >> [ 0.000000] ACPI: SPCR 000000007ffe9d90 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) >> [ 0.000000] ACPI: APIC 000000007ffe9de0 0001F8 (v01 PTLTD ? APIC 06040000 LTP 00000000) >> [ 0.000000] ACPI: BOOT 000000007ffe9fd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) >> [ 0.000000] ACPI: Local APIC address 0xfee00000 >> [ 0.000000] Scanning NUMA topology in Northbridge 24 >> [ 0.000000] Number of physical nodes 8 >> [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000130000000 >> [ 0.000000] Node 1 MemBase 0000000130000000 Limit 0000000230000000 >> [ 0.000000] Node 2 MemBase 0000000230000000 Limit 0000000330000000 >> [ 0.000000] Node 3 MemBase 0000000330000000 Limit 0000000430000000 >> [ 0.000000] Node 4 MemBase 0000000430000000 Limit 0000000530000000 >> [ 0.000000] Node 5 MemBase 0000000530000000 Limit 0000000630000000 >> [ 0.000000] Node 6 MemBase 0000000630000000 Limit 0000000830000000 >> [ 0.000000] Node 7 MemBase 0000000830000000 Limit 0000000a30000000 >> [ 0.000000] BSP APIC ID: 04 >> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff] >> [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff] >> [ 0.000000] Initmem setup node 1 [mem 0x130000000-0x22fffffff] >> [ 0.000000] NODE_DATA [mem 0x22fffc000-0x22fffffff] >> [ 0.000000] Initmem setup node 2 [mem 0x230000000-0x32fffffff] >> [ 0.000000] NODE_DATA [mem 0x32fffc000-0x32fffffff] >> [ 0.000000] Initmem setup node 3 [mem 0x330000000-0x42fffffff] >> [ 0.000000] NODE_DATA [mem 0x42fffc000-0x42fffffff] >> [ 0.000000] Initmem setup node 4 [mem 0x430000000-0x52fffffff] >> [ 0.000000] NODE_DATA [mem 0x52fffc000-0x52fffffff] >> [ 0.000000] Initmem setup node 5 [mem 0x530000000-0x62fffffff] >> [ 0.000000] NODE_DATA [mem 0x62fffc000-0x62fffffff] >> [ 0.000000] Initmem setup node 6 [mem 0x630000000-0x82fffffff] >> [ 0.000000] NODE_DATA [mem 0x82fffc000-0x82fffffff] >> [ 0.000000] Initmem setup node 7 [mem 0x830000000-0xa2fffffff] >> [ 0.000000] NODE_DATA [mem 0xa2fffa000-0xa2fffdfff] >> [ 0.000000] [ffffea0004280000-ffffea00043fffff] potential offnode page_structs >> [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0 >> [ 0.000000] [ffffea0007a80000-ffffea0007bfffff] potential offnode page_structs >> [ 0.000000] [ffffea0004400000-ffffea0007bfffff] PMD -> [ffff88022be00000-ffff88022f5fffff] on node 1 >> [ 0.000000] [ffffea000b280000-ffffea000b3fffff] potential offnode page_structs >> [ 0.000000] [ffffea0007c00000-ffffea000b3fffff] PMD -> [ffff88032be00000-ffff88032f5fffff] on node 2 >> [ 0.000000] [ffffea000ea80000-ffffea000ebfffff] potential offnode page_structs >> [ 0.000000] [ffffea000b400000-ffffea000ebfffff] PMD -> [ffff88042be00000-ffff88042f5fffff] on node 3 >> [ 0.000000] [ffffea0012280000-ffffea00123fffff] potential offnode page_structs >> [ 0.000000] [ffffea000ec00000-ffffea00123fffff] PMD -> [ffff88052be00000-ffff88052f5fffff] on node 4 >> [ 0.000000] [ffffea0015a80000-ffffea0015bfffff] potential offnode page_structs >> [ 0.000000] [ffffea0012400000-ffffea0015bfffff] PMD -> [ffff88062be00000-ffff88062f5fffff] on node 5 >> [ 0.000000] [ffffea001ca80000-ffffea001cbfffff] potential offnode page_structs >> [ 0.000000] [ffffea0015c00000-ffffea001cbfffff] PMD -> [ffff880827e00000-ffff88082edfffff] on node 6 >> [ 0.000000] [ffffea001cc00000-ffffea0023bfffff] PMD -> [ffff880a27600000-ffff880a2e5fffff] on node 7 >> [ 0.000000] Zone ranges: >> [ 0.000000] DMA [mem 0x00001000-0x00ffffff] >> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] >> [ 0.000000] Normal [mem 0x100000000-0xa2fffffff] >> [ 0.000000] Movable zone start for each node >> [ 0.000000] Early memory node ranges >> [ 0.000000] node 0: [mem 0x00001000-0x00098fff] >> [ 0.000000] node 0: [mem 0x00100000-0x7ffdffff] >> [ 0.000000] node 0: [mem 0x80000000-0xcfbfffff] >> [ 0.000000] node 0: [mem 0x100000000-0x12fffffff] >> [ 0.000000] node 1: [mem 0x130000000-0x22fffffff] >> [ 0.000000] node 2: [mem 0x230000000-0x32fffffff] >> [ 0.000000] node 3: [mem 0x330000000-0x42fffffff] >> [ 0.000000] node 4: [mem 0x430000000-0x52fffffff] >> [ 0.000000] node 5: [mem 0x530000000-0x62fffffff] >> [ 0.000000] node 6: [mem 0x630000000-0x82fffffff] >> [ 0.000000] node 7: [mem 0x830000000-0xa2fffffff] >> [ 0.000000] On node 0 totalpages: 1047416 >> [ 0.000000] DMA zone: 56 pages used for memmap >> [ 0.000000] DMA zone: 21 pages reserved >> [ 0.000000] DMA zone: 3992 pages, LIFO batch:0 >> [ 0.000000] DMA32 zone: 11578 pages used for memmap >> [ 0.000000] DMA32 zone: 846816 pages, LIFO batch:31 >> [ 0.000000] Normal zone: 2688 pages used for memmap >> [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 >> [ 0.000000] On node 1 totalpages: 1048576 >> [ 0.000000] Normal zone: 14336 pages used for memmap >> [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 >> [ 0.000000] On node 2 totalpages: 1048576 >> [ 0.000000] Normal zone: 14336 pages used for memmap >> [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 >> [ 0.000000] On node 3 totalpages: 1048576 >> [ 0.000000] Normal zone: 14336 pages used for memmap >> [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 >> [ 0.000000] On node 4 totalpages: 1048576 >> [ 0.000000] Normal zone: 14336 pages used for memmap >> [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 >> [ 0.000000] On node 5 totalpages: 1048576 >> [ 0.000000] Normal zone: 14336 pages used for memmap >> [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 >> [ 0.000000] On node 6 totalpages: 2097152 >> [ 0.000000] Normal zone: 28672 pages used for memmap >> [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 >> [ 0.000000] On node 7 totalpages: 2097152 >> [ 0.000000] Normal zone: 28672 pages used for memmap >> [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 >> [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. >> [ 0.000000] If you got timer trouble try acpi_use_timer_override >> [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 >> [ 0.000000] ACPI: Local APIC address 0xfee00000 >> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x04] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x05] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x09] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0b] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0c] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0d] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0e] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0f] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x10] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x12] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x13] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x14] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x16] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x17] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x18] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x19] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x1a] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x1b] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x1c] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x1d] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1e] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1f] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x20] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x21] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x22] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x23] enabled) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1]) >> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) >> [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 >> [ 0.000000] ACPI: IRQ9 used by override. >> [ 0.000000] Using ACPI (MADT) for SMP configuration information >> [ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs >> [ 0.000000] nr_irqs_gsi: 40 >> [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff] >> [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000c9fff] >> [ 0.000000] PM: Registered nosave memory: [mem 0x000ca000-0x000fffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0x7ffe0000-0x7ffe9fff] >> [ 0.000000] PM: Registered nosave memory: [mem 0x7ffea000-0x7fffffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xcfc00000-0xcfffffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfff7ffff] >> [ 0.000000] PM: Registered nosave memory: [mem 0xfff80000-0xffffffff] >> [ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices >> [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:8 >> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s79552 r8192 d22848 u524288 >> [ 0.000000] pcpu-alloc: s79552 r8192 d22848 u524288 alloc=1*2097152 >> [ 0.000000] pcpu-alloc: [0] 00 01 02 03 [1] 04 05 06 07 >> [ 0.000000] pcpu-alloc: [2] 08 09 10 11 [3] 12 13 14 15 >> [ 0.000000] pcpu-alloc: [4] 16 17 18 19 [5] 20 21 22 23 >> [ 0.000000] pcpu-alloc: [6] 24 25 26 27 [7] 28 29 30 31 >> [ 0.000000] Built 8 zonelists in Zone order, mobility grouping on. Total pages: 10341233 >> [ 0.000000] Policy zone: Normal >> [ 0.000000] Kernel command line: root=/dev/sda2 >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) >> [ 0.000000] Checking aperture... >> [ 0.000000] No AGP bridge found >> [ 0.000000] Node 0: aperture @ d0000000 size 64 MB >> [ 0.000000] Node 1: aperture @ d0000000 size 64 MB >> [ 0.000000] Node 2: aperture @ d0000000 size 64 MB >> [ 0.000000] Node 3: aperture @ d0000000 size 64 MB >> [ 0.000000] Node 4: aperture @ d0000000 size 64 MB >> [ 0.000000] Node 5: aperture @ d0000000 size 64 MB >> [ 0.000000] Node 6: aperture @ d0000000 size 64 MB >> [ 0.000000] Node 7: aperture @ d0000000 size 64 MB >> [ 0.000000] Memory: 41283204K/41938400K available (4367K kernel code, 605K rwdata, 2328K rodata, 932K init, 892K bss, 655196K reserved) >> [ 0.000000] Hierarchical RCU implementation. >> [ 0.000000] NR_IRQS:4352 nr_irqs:936 16 >> [ 0.000000] ACPI: Core revision 20131218 >> [ 0.000000] ACPI: All ACPI Tables successfully acquired >> [ 0.000000] spurious 8259A interrupt: IRQ7. >> [ 0.000000] Console: colour VGA+ 80x25 >> [ 0.000000] console [tty0] enabled >> [ 0.000000] tsc: Fast TSC calibration using PIT >> [ 0.000000] tsc: Detected 1908.651 MHz processor >> [ 0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3817.30 BogoMIPS (lpj=7634604) >> [ 0.000319] pid_max: default: 32768 minimum: 301 >> [ 0.009350] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) >> [ 0.059361] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) >> [ 0.083758] Mount-cache hash table entries: 256 >> [ 0.084628] tseg: 00cfc00000 >> [ 0.084633] CPU: Physical Processor ID: 0 >> [ 0.084781] CPU: Processor Core ID: 0 >> [ 0.084927] mce: CPU supports 6 MCE banks >> [ 0.085082] LVT offset 0 assigned for vector 0xf9 >> [ 0.085235] process: using AMD E400 aware idle routine >> [ 0.085393] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 >> Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 >> tlb_flushall_shift: 4 >> [ 0.085960] Freeing SMP alternatives memory: 20K (ffffffff8180f000 - ffffffff81814000) >> [ 0.086297] Switched APIC routing to physical flat. >> [ 0.086886] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 >> [ 0.126797] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 HE (fam: 10, model: 02, stepping: 03) >> [ 0.233914] Performance Events: AMD PMU driver. >> [ 0.234114] ... version: 0 >> [ 0.234265] ... bit width: 48 >> [ 0.234400] ... generic registers: 4 >> [ 0.234546] ... value mask: 0000ffffffffffff >> [ 0.234694] ... max period: 00007fffffffffff >> [ 0.234842] ... fixed-purpose events: 0 >> [ 0.234976] ... event mask: 000000000000000f >> [ 0.236512] x86: Booting SMP configuration: >> [ 0.236693] .... node #0, CPUs: #1 #2 #3 >> [ 0.278765] .... node #1, CPUs: #4 #5 #6 #7 >> [ 0.428591] .... node #2, CPUs: #8 #9 #10 #11 >> [ 0.579350] .... node #3, CPUs: #12 #13 #14 #15 >> [ 0.731545] .... node #4, CPUs: #16 #17 #18 #19 >> [ 0.883678] .... node #5, CPUs: #20 #21 #22 #23 >> [ 1.035899] .... node #6, CPUs: #24 #25 #26 #27 >> [ 1.188041] .... node #7, CPUs: #28 #29 #30 #31 >> [ 1.339624] x86: Booted up 8 nodes, 32 CPUs >> [ 1.339917] smpboot: Total of 32 processors activated (122204.77 BogoMIPS) >> [ 1.361939] devtmpfs: initialized >> [ 1.362749] PM: Registering ACPI NVS region [mem 0x7ffea000-0x7fffffff] (90112 bytes) >> [ 1.364210] NET: Registered protocol family 16 >> [ 1.364982] cpuidle: using governor ladder >> [ 1.365127] cpuidle: using governor menu >> [ 1.365281] node 0 link 1: io port [1000, 3fff] >> [ 1.365285] node 1 link 1: io port [b000, bfff] >> [ 1.365288] node 1 link 1: io port [9000, 9fff] >> [ 1.365291] TOM: 00000000d0000000 aka 3328M >> [ 1.365440] node 0 link 1: mmio [d4000000, dbffffff] >> [ 1.365444] node 1 link 1: mmio [dc000000, dc3fffff] >> [ 1.365447] node 0 link 1: mmio [a0000, bffff] >> [ 1.365450] node 0 link 1: mmio [e0000000, e7ffffff] >> [ 1.365452] node 1 link 1: mmio [e8000000, efffffff] >> [ 1.365454] TOM2: 0000000a30000000 aka 41728M >> [ 1.365611] bus: [bus 00-7f] on node 0 link 1 >> [ 1.365613] bus: 00 [io 0x0000-0x8fff] >> [ 1.365615] bus: 00 [io 0xc000-0xffff] >> [ 1.365616] bus: 00 [io 0xa000-0xafff] >> [ 1.365618] bus: 00 [mem 0xd0000000-0xdbffffff] >> [ 1.365619] bus: 00 [mem 0x000a0000-0x000bffff] >> [ 1.365620] bus: 00 [mem 0xdc400000-0xe7ffffff] >> [ 1.365621] bus: 00 [mem 0xf0000000-0xffffffff] >> [ 1.365623] bus: 00 [mem 0xa30000000-0xfcffffffff] >> [ 1.365624] bus: [bus 80-ff] on node 1 link 1 >> [ 1.365626] bus: 80 [io 0xb000-0xbfff] >> [ 1.365627] bus: 80 [io 0x9000-0x9fff] >> [ 1.365628] bus: 80 [mem 0xdc000000-0xdc3fffff] >> [ 1.365629] bus: 80 [mem 0xe8000000-0xefffffff] >> [ 1.365775] ACPI: bus type PCI registered >> [ 1.366154] PCI: Using configuration type 1 for base access >> [ 1.366310] PCI: Using configuration type 1 for extended access >> [ 1.382622] bio: create slab <bio-0> at 0 >> [ 1.383716] ACPI: Added _OSI(Module Device) >> [ 1.383862] ACPI: Added _OSI(Processor Device) >> [ 1.384018] ACPI: Added _OSI(3.0 _SCP Extensions) >> [ 1.384165] ACPI: Added _OSI(Processor Aggregator Device) >> [ 1.400068] ACPI: Interpreter enabled >> [ 1.400286] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) >> [ 1.400627] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580) >> [ 1.400974] ACPI: (supports S0 S1 S4 S5) >> [ 1.401121] ACPI: Using IOAPIC for interrupt routing >> [ 1.401387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug >> [ 1.401947] ACPI: No dock devices found. >> [ 1.422160] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) >> [ 1.422378] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] >> [ 1.422549] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM >> [ 1.423048] acpi PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff]) >> [ 1.423450] PCI host bridge to bus 0000:00 >> [ 1.423602] pci_bus 0000:00: root bus resource [bus 00-07] >> [ 1.423753] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] >> [ 1.423908] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] >> [ 1.424058] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] >> [ 1.424200] pci_bus 0000:00: root bus resource [mem 0xd4000000-0xdbffffff] >> [ 1.424381] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 >> [ 1.424685] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 >> [ 1.424734] HPET not enabled in BIOS. You might try hpet=force boot option >> [ 1.425052] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 >> [ 1.425062] pci 0000:00:01.1: reg 0x10: [io 0x0000-0x001f] >> [ 1.425081] pci 0000:00:01.1: reg 0x20: [io 0xa000-0xa03f] >> [ 1.425088] pci 0000:00:01.1: reg 0x24: [io 0xa040-0xa07f] >> [ 1.425133] pci 0000:00:01.1: PME# supported from D3hot D3cold >> [ 1.425330] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 >> [ 1.425346] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd4000fff] >> [ 1.425391] pci 0000:00:02.0: supports D1 D2 >> [ 1.425398] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.425499] pci 0000:00:02.0: System wakeup disabled by ACPI >> [ 1.425763] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 >> [ 1.425772] pci 0000:00:02.1: reg 0x10: [mem 0xd4001000-0xd40010ff] >> [ 1.425823] pci 0000:00:02.1: supports D1 D2 >> [ 1.425833] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.425936] pci 0000:00:02.1: System wakeup disabled by ACPI >> [ 1.426208] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a >> [ 1.426239] pci 0000:00:06.0: reg 0x20: [io 0x1400-0x140f] >> [ 1.426433] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 >> [ 1.426445] pci 0000:00:07.0: reg 0x10: [io 0x1440-0x1447] >> [ 1.426449] pci 0000:00:07.0: reg 0x14: [io 0x1434-0x1437] >> [ 1.426454] pci 0000:00:07.0: reg 0x18: [io 0x1438-0x143f] >> [ 1.426459] pci 0000:00:07.0: reg 0x1c: [io 0x1430-0x1433] >> [ 1.426463] pci 0000:00:07.0: reg 0x20: [io 0x1410-0x141f] >> [ 1.426468] pci 0000:00:07.0: reg 0x24: [mem 0xd4002000-0xd4002fff] >> [ 1.426709] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 >> [ 1.426720] pci 0000:00:08.0: reg 0x10: [io 0x1458-0x145f] >> [ 1.426739] pci 0000:00:08.0: reg 0x14: [io 0x144c-0x144f] >> [ 1.426749] pci 0000:00:08.0: reg 0x18: [io 0x1450-0x1457] >> [ 1.426753] pci 0000:00:08.0: reg 0x1c: [io 0x1448-0x144b] >> [ 1.426763] pci 0000:00:08.0: reg 0x20: [io 0x1420-0x142f] >> [ 1.426772] pci 0000:00:08.0: reg 0x24: [mem 0xd4003000-0xd4003fff] >> [ 1.426997] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401 >> [ 1.427084] pci 0000:00:09.0: System wakeup disabled by ACPI >> [ 1.427349] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000 >> [ 1.427358] pci 0000:00:0a.0: reg 0x10: [mem 0xd4004000-0xd4004fff] >> [ 1.427376] pci 0000:00:0a.0: reg 0x14: [io 0x1460-0x1467] >> [ 1.427400] pci 0000:00:0a.0: supports D1 D2 >> [ 1.427421] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.427536] pci 0000:00:0a.0: System wakeup disabled by ACPI >> [ 1.427799] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 >> [ 1.427844] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.428035] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 >> [ 1.428087] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.428303] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 >> [ 1.428346] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.428568] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 >> [ 1.428630] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.428852] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 >> [ 1.429069] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 >> [ 1.429266] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 >> [ 1.429461] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 >> [ 1.429666] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 >> [ 1.429896] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 >> [ 1.430115] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 >> [ 1.430318] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 >> [ 1.430539] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 >> [ 1.430765] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 >> [ 1.430957] pci 0000:00:1a.0: [1022:1200] type 00 class 0x060000 >> [ 1.431235] pci 0000:00:1a.1: [1022:1201] type 00 class 0x060000 >> [ 1.431596] pci 0000:00:1a.2: [1022:1202] type 00 class 0x060000 >> [ 1.431835] pci 0000:00:1a.3: [1022:1203] type 00 class 0x060000 >> [ 1.432043] pci 0000:00:1a.4: [1022:1204] type 00 class 0x060000 >> [ 1.432274] pci 0000:00:1b.0: [1022:1200] type 00 class 0x060000 >> [ 1.432491] pci 0000:00:1b.1: [1022:1201] type 00 class 0x060000 >> [ 1.432690] pci 0000:00:1b.2: [1022:1202] type 00 class 0x060000 >> [ 1.432893] pci 0000:00:1b.3: [1022:1203] type 00 class 0x060000 >> [ 1.433103] pci 0000:00:1b.4: [1022:1204] type 00 class 0x060000 >> [ 1.433319] pci 0000:00:1c.0: [1022:1200] type 00 class 0x060000 >> [ 1.433535] pci 0000:00:1c.1: [1022:1201] type 00 class 0x060000 >> [ 1.433748] pci 0000:00:1c.2: [1022:1202] type 00 class 0x060000 >> [ 1.433955] pci 0000:00:1c.3: [1022:1203] type 00 class 0x060000 >> [ 1.434165] pci 0000:00:1c.4: [1022:1204] type 00 class 0x060000 >> [ 1.434352] pci 0000:00:1d.0: [1022:1200] type 00 class 0x060000 >> [ 1.434558] pci 0000:00:1d.1: [1022:1201] type 00 class 0x060000 >> [ 1.434779] pci 0000:00:1d.2: [1022:1202] type 00 class 0x060000 >> [ 1.435012] pci 0000:00:1d.3: [1022:1203] type 00 class 0x060000 >> [ 1.435222] pci 0000:00:1d.4: [1022:1204] type 00 class 0x060000 >> [ 1.435452] pci 0000:00:1e.0: [1022:1200] type 00 class 0x060000 >> [ 1.435685] pci 0000:00:1e.1: [1022:1201] type 00 class 0x060000 >> [ 1.435882] pci 0000:00:1e.2: [1022:1202] type 00 class 0x060000 >> [ 1.436097] pci 0000:00:1e.3: [1022:1203] type 00 class 0x060000 >> [ 1.436309] pci 0000:00:1e.4: [1022:1204] type 00 class 0x060000 >> [ 1.436526] pci 0000:00:1f.0: [1022:1200] type 00 class 0x060000 >> [ 1.436757] pci 0000:00:1f.1: [1022:1201] type 00 class 0x060000 >> [ 1.436946] pci 0000:00:1f.2: [1022:1202] type 00 class 0x060000 >> [ 1.437175] pci 0000:00:1f.3: [1022:1203] type 00 class 0x060000 >> [ 1.437390] pci 0000:00:1f.4: [1022:1204] type 00 class 0x060000 >> [ 1.437763] pci 0000:01:06.0: [8086:1076] type 00 class 0x020000 >> [ 1.437797] pci 0000:01:06.0: reg 0x10: [mem 0xd4120000-0xd413ffff] >> [ 1.437806] pci 0000:01:06.0: reg 0x14: [mem 0xd4100000-0xd411ffff] >> [ 1.437814] pci 0000:01:06.0: reg 0x18: [io 0x2080-0x20bf] >> [ 1.437847] pci 0000:01:06.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] >> [ 1.437881] pci 0000:01:06.0: PME# supported from D0 D3hot D3cold >> [ 1.438014] pci 0000:01:09.0: [18ca:0020] type 00 class 0x030000 >> [ 1.438034] pci 0000:01:09.0: reg 0x10: [mem 0xd8000000-0xdbffffff pref] >> [ 1.438048] pci 0000:01:09.0: reg 0x14: [mem 0xd4140000-0xd417ffff] >> [ 1.438055] pci 0000:01:09.0: reg 0x18: [io 0x2000-0x207f] >> [ 1.438099] pci 0000:01:09.0: supports D1 D2 >> [ 1.438253] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode) >> [ 1.438442] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] >> [ 1.438446] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff] >> [ 1.438449] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff pref] >> [ 1.438452] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) >> [ 1.438455] pci 0000:00:09.0: bridge window [io 0x0d00-0x3fff] (subtractive decode) >> [ 1.438458] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) >> [ 1.438460] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xdbffffff] (subtractive decode) >> [ 1.438560] pci 0000:00:0b.0: PCI bridge to [bus 02] >> [ 1.438841] pci 0000:00:0c.0: PCI bridge to [bus 03] >> [ 1.439116] pci 0000:00:0d.0: PCI bridge to [bus 05] >> [ 1.439271] pci 0000:00:0e.0: bridge configuration invalid ([bus 0a-0a]), reconfiguring >> [ 1.439545] pci 0000:00:0e.0: PCI bridge to [bus 06-07] >> [ 1.439697] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] >> [ 1.439700] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff] >> [ 1.439705] pci_bus 0000:06: busn_res: [bus 06-07] end is updated to 06 >> [ 1.440683] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 >> [ 1.441230] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 >> [ 1.441734] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 >> [ 1.442234] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. >> [ 1.442778] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. >> [ 1.443310] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. >> [ 1.443889] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 >> [ 1.444388] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 >> [ 1.444883] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0 >> [ 1.445384] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. >> [ 1.445923] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. >> [ 1.446448] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. >> [ 1.446981] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 >> [ 1.447493] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. >> [ 1.448029] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. >> [ 1.448713] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) >> [ 1.448870] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] >> [ 1.449034] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM >> [ 1.449632] acpi PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff]) >> [ 1.449994] PCI host bridge to bus 0000:80 >> [ 1.450143] pci_bus 0000:80: root bus resource [bus 80-ff] >> [ 1.450286] pci_bus 0000:80: root bus resource [io 0xb000-0xffff] >> [ 1.450427] pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff] >> [ 1.450578] pci_bus 0000:80: root bus resource [mem 0xdc000000-0xdc3fffff] >> [ 1.450755] pci 0000:80:00.0: [10de:005e] type 00 class 0x058000 >> [ 1.451000] pci 0000:80:01.0: [10de:00d3] type 00 class 0x058000 >> [ 1.451196] pci 0000:80:07.0: [10de:0054] type 00 class 0x010185 >> [ 1.451213] pci 0000:80:07.0: reg 0x10: [io 0xb030-0xb037] >> [ 1.451223] pci 0000:80:07.0: reg 0x14: [io 0xb024-0xb027] >> [ 1.451228] pci 0000:80:07.0: reg 0x18: [io 0xb028-0xb02f] >> [ 1.451234] pci 0000:80:07.0: reg 0x1c: [io 0xb020-0xb023] >> [ 1.451238] pci 0000:80:07.0: reg 0x20: [io 0xb000-0xb00f] >> [ 1.451244] pci 0000:80:07.0: reg 0x24: [mem 0xdc000000-0xdc000fff] >> [ 1.451409] pci 0000:80:08.0: [10de:0055] type 00 class 0x010185 >> [ 1.451426] pci 0000:80:08.0: reg 0x10: [io 0xb048-0xb04f] >> [ 1.451436] pci 0000:80:08.0: reg 0x14: [io 0xb03c-0xb03f] >> [ 1.451450] pci 0000:80:08.0: reg 0x18: [io 0xb040-0xb047] >> [ 1.451455] pci 0000:80:08.0: reg 0x1c: [io 0xb038-0xb03b] >> [ 1.451469] pci 0000:80:08.0: reg 0x20: [io 0xb010-0xb01f] >> [ 1.451484] pci 0000:80:08.0: reg 0x24: [mem 0xdc001000-0xdc001fff] >> [ 1.451662] pci 0000:80:0a.0: [10de:0057] type 00 class 0x068000 >> [ 1.451671] pci 0000:80:0a.0: reg 0x10: [mem 0xdc002000-0xdc002fff] >> [ 1.451676] pci 0000:80:0a.0: reg 0x14: [io 0xb050-0xb057] >> [ 1.451703] pci 0000:80:0a.0: supports D1 D2 >> [ 1.451722] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.451772] pci 0000:80:0a.0: System wakeup disabled by ACPI >> [ 1.452040] pci 0000:80:0b.0: [10de:005d] type 01 class 0x060400 >> [ 1.452124] pci 0000:80:0b.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.452287] pci 0000:80:0c.0: [10de:005d] type 01 class 0x060400 >> [ 1.452366] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.452535] pci 0000:80:0d.0: [10de:005d] type 01 class 0x060400 >> [ 1.452591] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.452752] pci 0000:80:0e.0: [10de:005d] type 01 class 0x060400 >> [ 1.452801] pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.453089] pci 0000:80:0b.0: PCI bridge to [bus 81-85] >> [ 1.453360] pci 0000:80:0c.0: PCI bridge to [bus 86-8a] >> [ 1.453628] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f] >> [ 1.453906] pci 0000:80:0e.0: PCI bridge to [bus 90-94] >> [ 1.454691] vgaarb: device added: PCI:0000:01:09.0,decodes=io+mem,owns=io+mem,locks=none >> [ 1.454852] vgaarb: loaded >> [ 1.454999] vgaarb: bridge control possible 0000:01:09.0 >> [ 1.455969] SCSI subsystem initialized >> [ 1.456465] libata version 3.00 loaded. >> [ 1.456487] ACPI: bus type USB registered >> [ 1.456789] usbcore: registered new interface driver usbfs >> [ 1.457013] usbcore: registered new interface driver hub >> [ 1.457262] usbcore: registered new device driver usb >> [ 1.457586] PCI: Using ACPI for IRQ routing >> [ 1.457737] PCI: pci_cache_line_size set to 64 bytes >> [ 1.457750] pci 0000:00:01.1: no compatible bridge window for [io 0xa000-0xa03f] >> [ 1.457911] pci 0000:00:01.1: no compatible bridge window for [io 0xa040-0xa07f] >> [ 1.458211] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff] >> [ 1.458215] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff] >> [ 1.458217] e820: reserve RAM buffer [mem 0xcfc00000-0xcfffffff] >> [ 1.459034] Switched to clocksource refined-jiffies >> [ 1.466891] pnp: PnP ACPI init >> [ 1.467133] ACPI: bus type PNP registered >> [ 1.467833] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved >> [ 1.467989] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved >> [ 1.468150] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved >> [ 1.468304] system 00:00: [mem 0xfefff000-0xfeffffff] has been reserved >> [ 1.468464] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) >> [ 1.469070] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) >> [ 1.469577] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) >> [ 1.470020] pnp 00:03: [dma 2] >> [ 1.470156] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) >> [ 1.470717] pnp 00:04: [dma 1] >> [ 1.470958] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) >> [ 1.471099] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) >> [ 1.471214] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) >> [ 1.471688] system 00:07: [io 0x8000-0x807f] could not be reserved >> [ 1.471849] system 00:07: [io 0x8080-0x80ff] has been reserved >> [ 1.472000] system 00:07: [io 0x8400-0x847f] has been reserved >> [ 1.472152] system 00:07: [io 0x8480-0x84ff] has been reserved >> [ 1.472303] system 00:07: [io 0x8800-0x887f] has been reserved >> [ 1.472443] system 00:07: [io 0x8880-0x88ff] has been reserved >> [ 1.472603] system 00:07: [io 0xa000-0xa03f] has been reserved >> [ 1.472743] system 00:07: [io 0xa040-0xa07f] has been reserved >> [ 1.472899] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) >> [ 1.472943] pnp 00:08: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.1 BAR 0 [io 0x0000-0x001f] >> [ 1.473208] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f] >> [ 1.473459] pnp 00:08: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f] >> [ 1.473718] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f] >> [ 1.473978] pnp 00:08: disabling [io 0x0022-0x003f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f] >> [ 1.474389] system 00:08: [io 0x04d0-0x04d1] has been reserved >> [ 1.474541] system 00:08: [io 0x0400-0x045e] has been reserved >> [ 1.474695] system 00:08: [io 0x9000-0x907f] has been reserved >> [ 1.474847] system 00:08: [io 0x9080-0x90ff] has been reserved >> [ 1.475002] system 00:08: [io 0x9200-0x927f] has been reserved >> [ 1.475152] system 00:08: [io 0x9280-0x92ff] has been reserved >> [ 1.475302] system 00:08: [io 0x9400-0x947f] has been reserved >> [ 1.475463] system 00:08: [io 0x9480-0x94ff] has been reserved >> [ 1.475617] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) >> [ 1.475643] pnp 00:09: [dma 4] >> [ 1.475731] pnp 00:09: Plug and Play ACPI device, IDs PNP0200 (active) >> [ 1.475835] pnp 00:0a: Plug and Play ACPI device, IDs PNP0800 (active) >> [ 1.475946] pnp 00:0b: Plug and Play ACPI device, IDs PNP0b00 (active) >> [ 1.476053] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active) >> [ 1.476618] pnp: PnP ACPI: found 13 devices >> [ 1.476765] ACPI: bus type PNP unregistered >> [ 1.488318] Switched to clocksource acpi_pm >> [ 1.488677] pci 0000:00:01.1: BAR 4: assigned [io 0x1000-0x103f] >> [ 1.488858] pci 0000:00:01.1: BAR 5: assigned [io 0x1040-0x107f] >> [ 1.489102] pci 0000:00:01.1: BAR 0: assigned [io 0x1080-0x109f] >> [ 1.489315] pci 0000:01:06.0: BAR 6: assigned [mem 0xd4180000-0xd419ffff pref] >> [ 1.489497] pci 0000:00:09.0: PCI bridge to [bus 01] >> [ 1.489682] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] >> [ 1.493956] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff] >> [ 1.494138] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff pref] >> [ 1.494322] pci 0000:00:0b.0: PCI bridge to [bus 02] >> [ 1.494504] pci 0000:00:0c.0: PCI bridge to [bus 03] >> [ 1.494685] pci 0000:00:0d.0: PCI bridge to [bus 05] >> [ 1.494866] pci 0000:00:0e.0: PCI bridge to [bus 06] >> [ 1.495033] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] >> [ 1.495213] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff] >> [ 1.495407] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] >> [ 1.495410] pci_bus 0000:00: resource 5 [io 0x0d00-0x3fff] >> [ 1.495412] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] >> [ 1.495414] pci_bus 0000:00: resource 7 [mem 0xd4000000-0xdbffffff] >> [ 1.495417] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] >> [ 1.495420] pci_bus 0000:01: resource 1 [mem 0xd4100000-0xd41fffff] >> [ 1.495422] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref] >> [ 1.495424] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] >> [ 1.495427] pci_bus 0000:01: resource 5 [io 0x0d00-0x3fff] >> [ 1.495429] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] >> [ 1.495431] pci_bus 0000:01: resource 7 [mem 0xd4000000-0xdbffffff] >> [ 1.495434] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff] >> [ 1.495437] pci_bus 0000:06: resource 1 [mem 0xd4200000-0xd42fffff] >> [ 1.495465] pci 0000:80:0b.0: PCI bridge to [bus 81-85] >> [ 1.495648] pci 0000:80:0c.0: PCI bridge to [bus 86-8a] >> [ 1.495830] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f] >> [ 1.496020] pci 0000:80:0e.0: PCI bridge to [bus 90-94] >> [ 1.496201] pci_bus 0000:80: resource 4 [io 0xb000-0xffff] >> [ 1.496203] pci_bus 0000:80: resource 5 [mem 0x000a0000-0x000bffff] >> [ 1.496206] pci_bus 0000:80: resource 6 [mem 0xdc000000-0xdc3fffff] >> [ 1.497031] NET: Registered protocol family 2 >> [ 1.498475] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) >> [ 1.501906] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> [ 1.502847] TCP: Hash tables configured (established 524288 bind 65536) >> [ 1.503141] TCP: reno registered >> [ 1.503467] UDP hash table entries: 32768 (order: 8, 1048576 bytes) >> [ 1.504802] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) >> [ 1.506367] NET: Registered protocol family 1 >> [ 1.507174] RPC: Registered named UNIX socket transport module. >> [ 1.507351] RPC: Registered udp transport module. >> [ 1.507525] RPC: Registered tcp transport module. >> [ 1.507699] RPC: Registered tcp NFSv4.1 backchannel transport module. >> [ 1.508574] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23 >> [ 1.765307] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 >> [ 1.765759] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.765943] pci 0000:00:0b.0: Found disabled HT MSI Mapping >> [ 1.766127] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.766371] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.766553] pci 0000:00:0c.0: Found disabled HT MSI Mapping >> [ 1.766745] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.766983] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.767166] pci 0000:00:0d.0: Found disabled HT MSI Mapping >> [ 1.767349] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.767605] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.767787] pci 0000:00:0e.0: Found disabled HT MSI Mapping >> [ 1.767980] pci 0000:00:00.0: Found enabled HT MSI Mapping >> [ 1.768301] pci 0000:01:09.0: Boot video device >> [ 1.768437] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.768811] pci 0000:80:0b.0: Found disabled HT MSI Mapping >> [ 1.768985] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.769229] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.769411] pci 0000:80:0c.0: Found disabled HT MSI Mapping >> [ 1.769594] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.769824] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.770006] pci 0000:80:0d.0: Found disabled HT MSI Mapping >> [ 1.770190] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.770415] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.770606] pci 0000:80:0e.0: Found disabled HT MSI Mapping >> [ 1.770781] pci 0000:80:00.0: Found enabled HT MSI Mapping >> [ 1.770969] PCI: CLS 64 bytes, default 64 >> [ 1.774548] PCI-DMA: Disabling AGP. >> [ 1.776017] PCI-DMA: aperture base @ d0000000 size 65536 KB >> [ 1.776195] init_memory_mapping: [mem 0xd0000000-0xd3ffffff] >> [ 1.776372] [mem 0xd0000000-0xd3ffffff] page 2M >> [ 1.776390] PCI-DMA: using GART IOMMU. >> [ 1.776764] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture >> [ 1.786364] Simple Boot Flag at 0x37 set to 0x80 >> [ 1.789720] LVT offset 1 assigned for vector 0x400 >> [ 1.789952] IBS: LVT offset 1 assigned >> [ 1.790240] perf: AMD IBS detected (0x00000007) >> [ 1.800515] futex hash table entries: 8192 (order: 7, 524288 bytes) >> [ 1.837698] HugeTLB registered 2 MB page size, pre-allocated 0 pages >> [ 1.842081] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >> [ 1.842535] msgmni has been set to 32768 >> [ 1.843251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >> [ 1.843430] io scheduler noop registered >> [ 1.843588] io scheduler deadline registered >> [ 1.843912] io scheduler cfq registered (default) >> [ 1.844441] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X >> [ 1.844593] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X >> [ 1.844894] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X >> [ 1.845031] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X >> [ 1.845214] pcieport 0000:80:0b.0: irq 44 for MSI/MSI-X >> [ 1.845355] pcieport 0000:80:0c.0: irq 45 for MSI/MSI-X >> [ 1.845496] pcieport 0000:80:0d.0: irq 46 for MSI/MSI-X >> [ 1.845636] pcieport 0000:80:0e.0: irq 47 for MSI/MSI-X >> [ 1.846279] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 >> [ 1.846451] ACPI: Power Button [PWRB] >> [ 1.846826] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >> [ 1.846991] ACPI: Power Button [PWRF] >> [ 1.847364] ACPI: acpi_idle registered with cpuidle >> [ 1.893965] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >> [ 1.914552] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A >> [ 1.935196] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A >> [ 1.937027] Linux agpgart interface v0.103 >> [ 1.938762] Floppy drive(s): fd0 is 1.44M >> [ 1.942772] brd: module loaded >> [ 1.945257] loop: module loaded >> [ 1.946302] sata_nv 0000:00:07.0: version 3.5 >> [ 1.946834] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 >> [ 1.947922] scsi0 : sata_nv >> [ 1.948551] scsi1 : sata_nv >> [ 1.949030] ata1: SATA max UDMA/133 cmd 0x1440 ctl 0x1434 bmdma 0x1410 irq 21 >> [ 1.949199] ata2: SATA max UDMA/133 cmd 0x1438 ctl 0x1430 bmdma 0x1418 irq 21 >> [ 1.949703] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 >> [ 1.950980] scsi2 : sata_nv >> [ 1.951444] scsi3 : sata_nv >> [ 1.951760] ata3: SATA max UDMA/133 cmd 0x1458 ctl 0x144c bmdma 0x1420 irq 20 >> [ 1.951915] ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x1448 bmdma 0x1428 irq 20 >> [ 1.952476] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 19 >> [ 1.953779] scsi4 : sata_nv >> [ 1.954216] scsi5 : sata_nv >> [ 1.954538] ata5: SATA max UDMA/133 cmd 0xb030 ctl 0xb024 bmdma 0xb000 irq 19 >> [ 1.954724] ata6: SATA max UDMA/133 cmd 0xb028 ctl 0xb020 bmdma 0xb008 irq 19 >> [ 1.955130] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18 >> [ 1.956898] scsi6 : sata_nv >> [ 1.956928] FDC 0 is a post-1991 82077 >> [ 1.957499] scsi7 : sata_nv >> [ 1.958051] ata7: SATA max UDMA/133 cmd 0xb048 ctl 0xb03c bmdma 0xb010 irq 18 >> [ 1.958211] ata8: SATA max UDMA/133 cmd 0xb040 ctl 0xb038 bmdma 0xb018 irq 18 >> [ 1.958614] pata_amd 0000:00:06.0: version 0.4.1 >> [ 1.960046] scsi8 : pata_amd >> [ 1.960510] scsi9 : pata_amd >> [ 1.961107] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1400 irq 14 >> [ 1.961260] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1408 irq 15 >> [ 1.961664] tun: Universal TUN/TAP device driver, 1.6 >> [ 1.961881] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> >> [ 1.962441] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI >> [ 1.962613] e1000: Copyright (c) 1999-2006 Intel Corporation. >> [ 2.421374] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 2.421380] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 2.421388] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 2.429459] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 2.429933] ata5.00: ATA-8: ST31000340NS, SN05, max UDMA/133 >> [ 2.429970] ata3.00: ATA-8: ST31000340NS, SN05, max UDMA/133 >> [ 2.429975] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 2.429979] ata1.00: ATA-8: ST31000340NS, SN05, max UDMA/133 >> [ 2.429982] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 2.430730] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 2.437889] ata7.00: ATA-8: ST31000340NS, SN05, max UDMA/133 >> [ 2.438046] ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 2.439843] e1000 0000:01:06.0 eth0: (PCI:33MHz:32-bit) 00:e0:81:b0:4d:69 >> [ 2.440063] e1000 0000:01:06.0 eth0: Intel(R) PRO/1000 Network Connection >> [ 2.440342] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. >> [ 2.440745] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 >> [ 2.445929] ata5.00: configured for UDMA/133 >> [ 2.445944] ata1.00: configured for UDMA/133 >> [ 2.445947] ata3.00: configured for UDMA/133 >> [ 2.453937] ata7.00: configured for UDMA/133 >> [ 2.461623] scsi 0:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 >> [ 2.462234] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 2.462436] sd 0:0:0:0: Attached scsi generic sg0 type 0 >> [ 2.462604] sd 0:0:0:0: [sda] Write Protect is off >> [ 2.462752] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [ 2.462831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 2.466545] sda: sda1 sda2 sda3 >> [ 2.467532] sd 0:0:0:0: [sda] Attached SCSI disk >> [ 2.785738] tsc: Refined TSC clocksource calibration: 1908.795 MHz >> [ 2.929874] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 2.938395] ata2.00: ATA-6: ST31000340NS, SN04, max UDMA/133 >> [ 2.938537] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 2.954428] ata2.00: configured for UDMA/133 >> [ 2.954727] scsi 1:0:0:0: Direct-Access ATA ST31000340NS SN04 PQ: 0 ANSI: 5 >> [ 2.955298] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 2.955458] sd 1:0:0:0: Attached scsi generic sg1 type 0 >> [ 2.955599] sd 1:0:0:0: [sdb] Write Protect is off >> [ 2.955602] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >> [ 2.955662] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 2.956320] scsi 2:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 >> [ 2.956823] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 2.956961] sd 2:0:0:0: Attached scsi generic sg2 type 0 >> [ 2.957256] sd 2:0:0:0: [sdc] Write Protect is off >> [ 2.957437] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 >> [ 2.957493] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 2.966525] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b0:4d:67 >> [ 2.966688] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 >> [ 2.967353] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 >> [ 2.973575] sdb: unknown partition table >> [ 2.974337] sd 1:0:0:0: [sdb] Attached SCSI disk >> [ 2.978828] sdc: unknown partition table >> [ 2.979483] sd 2:0:0:0: [sdc] Attached SCSI disk >> [ 3.422364] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 3.430922] ata4.00: ATA-8: ST31000340NS, SN05, max UDMA/133 >> [ 3.431084] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 3.450916] ata4.00: configured for UDMA/133 >> [ 3.451231] scsi 3:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 >> [ 3.451767] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 3.451897] sd 3:0:0:0: Attached scsi generic sg3 type 0 >> [ 3.452109] sd 3:0:0:0: [sdd] Write Protect is off >> [ 3.452251] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 >> [ 3.452273] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 3.452327] scsi 4:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 >> [ 3.452767] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 3.452929] sd 4:0:0:0: Attached scsi generic sg4 type 0 >> [ 3.452971] sd 4:0:0:0: [sde] Write Protect is off >> [ 3.452973] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 >> [ 3.452998] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 3.471204] sde: sde1 sde2 sde3 >> [ 3.471425] sdd: unknown partition table >> [ 3.471785] sd 3:0:0:0: [sdd] Attached SCSI disk >> [ 3.472102] sd 4:0:0:0: [sde] Attached SCSI disk >> [ 3.491168] forcedeth 0000:80:0a.0: ifname eth2, PHY OUI 0x5043 @ 1, addr 00:e0:81:b0:4d:68 >> [ 3.494934] forcedeth 0000:80:0a.0: highdma csum gbit lnktim desc-v3 >> [ 3.495709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> [ 3.495929] ehci-pci: EHCI PCI platform driver >> [ 3.496286] ehci-pci 0000:00:02.1: EHCI Host Controller >> [ 3.496593] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 >> [ 3.496763] ehci-pci 0000:00:02.1: debug port 1 >> [ 3.496943] ehci-pci 0000:00:02.1: cache line size of 64 is not supported >> [ 3.496985] ehci-pci 0000:00:02.1: irq 22, io mem 0xd4001000 >> [ 3.506440] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 >> [ 3.507078] hub 1-0:1.0: USB hub found >> [ 3.507242] hub 1-0:1.0: 10 ports detected >> [ 3.507772] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >> [ 3.507937] ohci-pci: OHCI PCI platform driver >> [ 3.508170] ohci-pci 0000:00:02.0: OHCI PCI host controller >> [ 3.508447] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 >> [ 3.508657] ohci-pci 0000:00:02.0: irq 23, io mem 0xd4000000 >> [ 3.564862] hub 2-0:1.0: USB hub found >> [ 3.565016] hub 2-0:1.0: 10 ports detected >> [ 3.565487] uhci_hcd: USB Universal Host Controller Interface driver >> [ 3.565909] usbcore: registered new interface driver usblp >> [ 3.566154] usbcore: registered new interface driver usb-storage >> [ 3.566624] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >> [ 3.569634] serio: i8042 KBD port at 0x60,0x64 irq 1 >> [ 3.569790] serio: i8042 AUX port at 0x60,0x64 irq 12 >> [ 3.570275] mousedev: PS/2 mouse device common for all mice >> [ 3.571510] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com >> [ 3.572885] usbcore: registered new interface driver usbhid >> [ 3.573034] usbhid: USB HID core driver >> [ 3.573277] oprofile: AMD IBS detected (0x00000007) >> [ 3.573426] oprofile: using NMI interrupt. >> [ 3.573603] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) >> [ 3.574506] ip_tables: (C) 2000-2006 Netfilter Core Team >> [ 3.574769] arp_tables: (C) 2002 David S. Miller >> [ 3.574925] TCP: cubic registered >> [ 3.575081] NET: Registered protocol family 17 >> [ 3.579796] registered taskstats version 1 >> [ 3.580945] console [netcon0] enabled >> [ 3.581112] netconsole: network logging started >> [ 3.581709] acpi-cpufreq: overriding BIOS provided _PSD data >> [ 3.632806] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 >> [ 3.786962] Switched to clocksource tsc >> [ 3.922723] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 3.931297] ata6.00: ATA-8: ST31000340NS, SN05, max UDMA/133 >> [ 3.931467] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 3.947316] ata6.00: configured for UDMA/133 >> [ 3.947683] scsi 5:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 >> [ 3.948192] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 3.948338] sd 5:0:0:0: Attached scsi generic sg5 type 0 >> [ 3.948586] scsi 6:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 >> [ 3.948643] sd 5:0:0:0: [sdf] Write Protect is off >> [ 3.948646] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 >> [ 3.948701] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 3.949578] sd 6:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 3.949748] sd 6:0:0:0: Attached scsi generic sg6 type 0 >> [ 3.949853] sd 6:0:0:0: [sdg] Write Protect is off >> [ 3.949856] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 >> [ 3.949903] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 3.963054] sdg: unknown partition table >> [ 3.963604] sd 6:0:0:0: [sdg] Attached SCSI disk >> [ 3.968046] sdf: sdf1 sdf2 sdf3 >> [ 3.968961] sd 5:0:0:0: [sdf] Attached SCSI disk >> [ 4.195003] usb 2-1: new low-speed USB device number 2 using ohci-pci >> [ 4.201071] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 >> [ 4.415219] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 4.439489] ata8.00: ATA-7: Hitachi HUA721010KLA330, GKAOA70M, max UDMA/133 >> [ 4.439659] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 4.455503] ata8.00: configured for UDMA/133 >> [ 4.455801] scsi 7:0:0:0: Direct-Access ATA Hitachi HUA72101 GKAO PQ: 0 ANSI: 5 >> [ 4.456304] sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 4.456465] sd 7:0:0:0: Attached scsi generic sg7 type 0 >> [ 4.456578] sd 7:0:0:0: [sdh] Write Protect is off >> [ 4.456581] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 >> [ 4.456631] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 4.476217] sdh: unknown partition table >> [ 4.476784] sd 7:0:0:0: [sdh] Attached SCSI disk >> [ 4.643741] ata10.00: ATAPI: TEAC DV-516GB, HT13, max UDMA/33 >> [ 4.643935] ata10: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13) >> [ 4.683745] ata10.00: configured for UDMA/33 >> [ 4.685803] scsi 9:0:0:0: CD-ROM TEAC DV-516GB HT13 PQ: 0 ANSI: 5 >> [ 4.692806] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray >> [ 4.692978] cdrom: Uniform CD-ROM driver Revision: 3.20 >> [ 4.693396] sr 9:0:0:0: Attached scsi CD-ROM sr0 >> [ 4.693601] sr 9:0:0:0: Attached scsi generic sg8 type 5 >> [ 4.702694] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) >> [ 4.711018] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) >> [ 4.732346] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) >> [ 4.732514] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. >> [ 4.749372] devtmpfs: mounted >> [ 4.750484] Freeing unused kernel memory: 932K (ffffffff81726000 - ffffffff8180f000) >> [ 5.656993] random: nonblocking pool is initialized >> [ 5.925880] hid-generic 0003:051D:0002.0001: device has no listeners, quitting >> [ 6.394356] systemd-udevd[1972]: starting version 216 >> [ 6.877845] systemd-udevd[2033]: renamed network interface eth1 to enp0s10 >> [ 6.901811] systemd-udevd[1997]: renamed network interface eth0 to enp1s6 >> [ 6.933938] systemd-udevd[2051]: renamed network interface eth2 to enp128s10 >> [ 6.976890] kvm: Nested Virtualization enabled >> [ 6.976911] kvm: Nested Paging enabled >> [ 7.852431] EXT4-fs (sda2): re-mounted. Opts: (null) >> [ 9.297780] e1000: enp1s6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
| |