lkml.org 
[lkml]   [2014]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] watchdog: qcom: add support for KPSS WDT
On Thu, Sep 25, 2014 at 11:38:57AM -0700, Guenter Roeck wrote:
> On Thu, Sep 25, 2014 at 12:48:51PM -0500, Josh Cartwright wrote:
> > Add a driver for the watchdog timer block found in the Krait Processor
> > Subsystem (KPSS) on the MSM8960, APQ8064, and IPQ8064.
> >
> > Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
>
> Hi Josh,
>
> just a couple of minor comments this time (yes, I know,
> I am being difficult ;-).

Difficult, maybe, but at least someone's taking a look! Thanks, again.

[..]
> > +++ b/drivers/watchdog/qcom-wdt.c
[..]
> > +static int qcom_wdt_probe(struct platform_device *pdev)
> > +{
> > + struct qcom_wdt *wdt;
> > + struct resource *res;
> > + int ret;
> > +
> > + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> > + if (!wdt)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + wdt->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(wdt->base)) {
> > + ret = PTR_ERR(wdt->base);
> > + goto err_out;
>
> This is really unnecessary. Just return PTR_ERR((wdt->base) as you did before.
> No need to make the code more complicated than necessary.
>
> Basic rule is: If you can return immediately, do it. Otherwise use goto
> and have a single error handler.
>
> > + }
> > +
> > + wdt->clk = devm_clk_get(&pdev->dev, NULL);
> > + if (IS_ERR(wdt->clk)) {
> > + ret = PTR_ERR(wdt->clk);
> > + goto err_out;
>
> Same here.
>
> > + }
> > +
> > + ret = clk_prepare_enable(wdt->clk);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to setup clock\n");
> > + goto err_out;
>
> and here.

Okay, I can fix these up.

Josh

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2014-09-25 21:41    [W:0.034 / U:1.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site