lkml.org 
[lkml]   [2014]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: access nand flash and mmc card at the same time on xlp board, there will be many io errors and system will hung
The root cause is that: sometimes device can not respond quickly to the 
request, the timeout mechanism will handle
this.
Solution: enlarge the device respond timeout to avoid kernel crash.

Zhu Yanjun
On 09/19/2014 05:06 PM, yzhu1 wrote:
> Hi, Chris
>
> I run a tests on a xlp208 board. This kernel is 3.17-rc5.
> The script are as below.
> -------------Begin-------------------
> mkfs.ext3 /dev/mmcblk1p1
> mount /dev/mmcblk1p1 /mnt
> cd /mnt
> cp -Rf /root/nand_sd_test /mnt
> cd /mnt/nand_sd_test
> -------------End---------------------
>
> After several minutes, the following errors will appear.
> Would you like give me some advice about this error?
>
> Thanks a lot.
> Zhu Yanjun
>
> -----------------------------ErrorMessage------------------------------
> 16777216 bytes (17 MB) copied, 34.5951 s, 485 kB/s
> mmc1: Timeout waiting for hardware interrupt.
> mmc1: Timeout waiting for hardware interrupt.
> mmc1: Timeout waiting for hardware interrupt.
> mmcblk1: error -145 sending status command, retrying
> mmc1: Timeout waiting for hardware interrupt.
> mmcblk1: error -145 sending status command, retrying
> mmc1: Timeout waiting for hardware interrupt.
> mmcblk1: error -145 sending status command, aborting
> end_request: I/O error, dev mmcblk1, sector 3460800
> Buffer I/O error on device mmcblk1p1, logical block 432598
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460808
> Buffer I/O error on device mmcblk1p1, logical block 432599
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460816
> Buffer I/O error on device mmcblk1p1, logical block 432600
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460824
> Buffer I/O error on device mmcblk1p1, logical block 432601
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460832
> Buffer I/O error on device mmcblk1p1, logical block 432602
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460840
> Buffer I/O error on device mmcblk1p1, logical block 432603
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460848
> Buffer I/O error on device mmcblk1p1, logical block 432604
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460856
> Buffer I/O error on device mmcblk1p1, logical block 432605
> lost page write due to I/O error on mmcblk1p1
> end_request: I/O error, dev mmcblk1, sector 3460864
> Buffer I/O error on device mmcblk1p1, logical block 432606
> lost page write due to I/O error on mmcblk1p1
>
> mmc1: Timeout waiting for hardware interrupt.
> ------------[ cut here ]------------
> WARNING: at /linux/drivers/mmc/host/sdhci.c:996
> sdhci_send_command+0xd78/0xe68()
> Modules linked in:
> CPU: 6 PID: 0 Comm: swapper/6 Not tainted
> 3.10.38-ltsi-WR6.0.0.11_standard #1
> Stack : c0000000f83ff820 ffffffffc02a290c 0000000000000001
> 0000000000000e1b
> ffffffffc0d00000 ffffffffc0e005a0 0000000000000004 0000000000000001
> c0000000f83ff860 ffffffffc02a270c 000000000000004d ffffffffc0d00000
> c0000000f83ff880 ffffffffc02a2d7c 0000000000000000 0000000000000000
> 0000000000000000 ffffffffc1050000 ffffffffc104d008 ffffffffc1050000
> ffffffffc0b62fc0 ffffffffc0cfab37 ffffffffc104d008 c0000000f8217b28
> 0000000000000000 0000000000000006 c0000000f92e2508
> c0000000f92e23c0
> c0000000f83ff900 c0000000f83ff810 c0000000f83ff928 ffffffffc02a008c
> c0000000f83ff960 ffffffffc02a48c8 c0000000f8217788 ffffffffc0b62fc0
> 0000000000000006 ffffffffc0274c30 0000000000000000 0000000000000000
> ...
> Call Trace:
> [<ffffffffc0274c30>] show_stack+0xd8/0xf8
> [<ffffffffc02a008c>] warn_slowpath_common+0x8c/0xc8
> [<ffffffffc0880868>] sdhci_send_command+0xd78/0xe68
> [<ffffffffc0881380>] sdhci_finish_data+0x180/0x3d0
> [<ffffffffc08818f0>] sdhci_timeout_timer+0xb0/0x120
> [<ffffffffc02b45c8>] call_timer_fn+0x58/0x1a0
> [<ffffffffc02b4a00>] run_timer_softirq+0x1f8/0x2d0
> [<ffffffffc02aa6a0>] __do_softirq+0x150/0x340
> [<ffffffffc02aa9f0>] do_softirq+0xb8/0xc0
> [<ffffffffc02aada4>] irq_exit+0xf4/0x110
> [<ffffffffc026f160>] ret_from_irq+0x0/0x4
> [<ffffffffc026f400>] __r4k_wait+0x20/0x40
> [<ffffffffc02f85a8>] cpu_startup_entry+0x190/0x2f8
> [<ffffffffc0a33438>] nlm_boot_secondary_cpus+0x44/0x54
> ---[ end trace 7070d5fae37308f2 ]---



\
 
 \ /
  Last update: 2014-09-25 11:21    [W:0.033 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site