lkml.org 
[lkml]   [2014]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 4/4] thermal: Add Tegra SOCTHERM thermal management driver
On 09/25/2014 08:59 AM, Thierry Reding wrote:
> On Wed, Sep 24, 2014 at 10:32:13PM +0300, Mikko Perttunen wrote:
>> On 09/24/2014 10:18 PM, Eduardo Valentin wrote:
>>>
>>> Mikko,
>>>
>>> On Thu, Aug 21, 2014 at 01:17:22PM +0300, Mikko Perttunen wrote:
>>>> ...
>>>> +
>>>> +static int enable_tsensor(struct tegra_soctherm *tegra,
>>>> + const struct tegra_tsensor *sensor,
>>>> + struct tsensor_shared_calibration shared)
>>>> +{
>>>> + void * __iomem base = tegra->regs + sensor->base;
>>>
>>> I get sparse complaining about this declaration. For the sake of keeping
>>> a clean static checks, can you please:
>>> - void * __iomem base = tegra->regs + sensor->base;
>>> + void __iomem * base = tegra->regs + sensor->base;
>>>
>>
>> Sure.
>>
>>> Can you also please check the remaining sparse errors?
>>> CHECK drivers/thermal/tegra_soctherm.c
>>> drivers/thermal/tegra_soctherm.c:260:43: warning: incorrect type in
>>> initializer (different address spaces)
>>> drivers/thermal/tegra_soctherm.c:260:43: expected void *[noderef]
>>> <asn:2>base
>>> drivers/thermal/tegra_soctherm.c:260:43: got void [noderef]
>>> <asn:2>*
>>> drivers/thermal/tegra_soctherm.c:271:9: warning: incorrect type in
>>> argument 2 (different address spaces)
>>> drivers/thermal/tegra_soctherm.c:271:9: expected void volatile
>>> [noderef] <asn:2>*addr
>>> drivers/thermal/tegra_soctherm.c:271:9: got void *
>>> drivers/thermal/tegra_soctherm.c:279:9: warning: incorrect type in
>>> argument 2 (different address spaces)
>>> drivers/thermal/tegra_soctherm.c:279:9: expected void volatile
>>> [noderef] <asn:2>*addr
>>> drivers/thermal/tegra_soctherm.c:279:9: got void *
>>> drivers/thermal/tegra_soctherm.c:281:9: warning: incorrect type in
>>> argument 2 (different address spaces)
>>> drivers/thermal/tegra_soctherm.c:281:9: expected void volatile
>>> [noderef] <asn:2>*addr
>>> drivers/thermal/tegra_soctherm.c:281:9: got void *
>>> drivers/thermal/tegra_soctherm.c:347:25: warning: incorrect type in
>>> argument 1 (different address spaces)
>>> drivers/thermal/tegra_soctherm.c:347:25: expected void const *ptr
>>> drivers/thermal/tegra_soctherm.c:347:25: got void [noderef]
>>> <asn:2>*regs
>>> drivers/thermal/tegra_soctherm.c:349:37: warning: incorrect type in
>>> argument 1 (different address spaces)
>>> drivers/thermal/tegra_soctherm.c:349:37: expected void const *ptr
>>> drivers/thermal/tegra_soctherm.c:349:37: got void [noderef]
>>> <asn:2>*regs
>>> drivers/thermal/tegra_soctherm.c:271:9: warning: dereference of
>>> noderef expression
>>> drivers/thermal/tegra_soctherm.c:279:9: warning: dereference of
>>> noderef expression
>>> drivers/thermal/tegra_soctherm.c:281:9: warning: dereference of
>>> noderef expression
>>>
>>
>> Most of these seem to be caused by the above-mentioned swapping of __iomem
>> and *. The ones on lines 347 and 349 are more peculiar, though. Apparently
>> sparse doesn't like using IS_ERR and PTR_ERR on the void __iomem * pointer
>> returned by devm_ioremap_resource. Looks like this has been discussed before
>> (https://lkml.org/lkml/2013/6/17/216) and sparse should have been patched to
>> ignore this situation, so I'm not sure why it's complaining about it.
>> Anyway, there shouldn't be any issue here.
>
> If I apply the change suggested by Eduardo above then all of the above
> warnings go away for me. That's with sparse 0.5.0. According to the
> email thread above a patch for this was applied in 0.4.5.

Ah, good. I didn't actually run sparse, just checked by eye. Maybe I
should have run it.

>
> Thierry
>



\
 
 \ /
  Last update: 2014-09-25 10:21    [W:0.061 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site