lkml.org 
[lkml]   [2014]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] i2c: designware: device tree bindings for i2c speed mode
Date
From: Alan Tull <atull@opensource.altera.com>

Add "speed-mode" Device Tree property to select between
standard and fast i2c mode. Previously, driver was hardwired
as fast mode. Default to fast mode if property is not
present.

Signed-off-by: Alan Tull <atull@opensource.altera.com>
---
.../devicetree/bindings/i2c/i2c-designware.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 5199b0c..0e4cd21 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -9,6 +9,8 @@ Required properties :
Recommended properties :

- clock-frequency : desired I2C bus clock frequency in Hz.
+ - speed-mode : 0 = standard (0 - 100Kb/s)
+ : 1 = fast (<= 400Kb/s) <== default

Optional properties :
- i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
@@ -29,6 +31,7 @@ Example :
reg = <0xf0000 0x1000>;
interrupts = <11>;
clock-frequency = <400000>;
+ speed-mode = <0>;
};

i2c@1120000 {
--
1.7.9.5


\
 
 \ /
  Last update: 2014-08-19 21:21    [W:0.074 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site