lkml.org 
[lkml]   [2014]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] ARM: KVM: add irqfd support
On 08/13/2014 04:55 PM, Christoffer Dall wrote:
> On Mon, Aug 04, 2014 at 02:08:22PM +0200, Eric Auger wrote:
>> This patch enables irqfd on ARM.
>>
>> irqfd framework enables to inject a virtual IRQ into a guest upon an
>> eventfd trigger. User-side uses KVM_IRQFD VM ioctl to provide KVM with
>> a kvm_irqfd struct that associates a VM, an eventfd, an IRQ number
>> (aka. the gsi). When an actor signals the eventfd (typically a VFIO
>> platform driver), the kvm irqfd subsystem injects the provided virtual
>> IRQ into the guest.
>>
>> The gsi must correspond to a shared peripheral interrupt (SPI), ie the
>> GIC interrupt ID is gsi+32.
>
> Why can't we support PPIs?
Hi Christoffer,

Well, in case we want to support PPI at irqfd level, we would need to
change the semantic of the GSI value and use the same as KVM_IRQ_LINE,
to specify the target vcpu. This is obviously feasible but this also
induces changes in currently generic user parts, vfio, vhost. is PPI
injection though irqfd a valid use case?
>
>>
>> CONFIG_HAVE_KVM_EVENTFD and CONFIG_HAVE_KVM_IRQFD are turned on.
>
> This patch enables CONFIG_....
>
OK
>>
>> No IRQ routing table is used thanks to Paul Mackerras' patch serie:
>> "IRQFD without IRQ routing, enabled for XICS"
>> (https://www.mail-archive.com/kvm@vger.kernel.org/msg104478.html)
>>
>> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>>
>> ---
>>
>> This patch would deprecate the previous patch featuring GSI routing
>> (https://patches.linaro.org/32261/)
>>
>> irqchip.c and irq_comm.c are not used at all.
>>
>> This RFC applies on top of Christoffer Dall's serie
>> arm/arm64: KVM: Various VGIC cleanups and improvements
>> https://lists.cs.columbia.edu/pipermail/kvmarm/2014-June/009979.html
>>
>> All pieces can be found on git://git.linaro.org/people/eric.auger/linux.git
>> branch irqfd_integ_v4
>>
>> This work was tested with Calxeda Midway xgmac main interrupt with
>> qemu-system-arm and QEMU VFIO platform device.
>> ---
>> Documentation/virtual/kvm/api.txt | 5 +++-
>> arch/arm/include/uapi/asm/kvm.h | 3 +++
>> arch/arm/kvm/Kconfig | 3 ++-
>> arch/arm/kvm/Makefile | 2 +-
>> arch/arm/kvm/irq.h | 25 ++++++++++++++++++
>> virt/kvm/arm/vgic.c | 54 ++++++++++++++++++++++++++++++++++++---
>> 6 files changed, 85 insertions(+), 7 deletions(-)
>> create mode 100644 arch/arm/kvm/irq.h
>>
>> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
>> index 0fe3649..04310d9 100644
>> --- a/Documentation/virtual/kvm/api.txt
>> +++ b/Documentation/virtual/kvm/api.txt
>> @@ -2132,7 +2132,7 @@ into the hash PTE second double word).
>> 4.75 KVM_IRQFD
>>
>> Capability: KVM_CAP_IRQFD
>> -Architectures: x86 s390
>> +Architectures: x86 s390 arm
>> Type: vm ioctl
>> Parameters: struct kvm_irqfd (in)
>> Returns: 0 on success, -1 on error
>> @@ -2158,6 +2158,9 @@ Note that closing the resamplefd is not sufficient to disable the
>> irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment
>> and need not be specified with KVM_IRQFD_FLAG_DEASSIGN.
>>
>> +On ARM/arm64 the injected must be a shared peripheral interrupt (SPI).
>> +This means the programmed GIC interrupt ID is gsi+32.
>> +
>> 4.76 KVM_PPC_ALLOCATE_HTAB
>>
>> Capability: KVM_CAP_PPC_ALLOC_HTAB
>> diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
>> index e6ebdd3..3034c66 100644
>> --- a/arch/arm/include/uapi/asm/kvm.h
>> +++ b/arch/arm/include/uapi/asm/kvm.h
>> @@ -194,6 +194,9 @@ struct kvm_arch_memory_slot {
>> /* Highest supported SPI, from VGIC_NR_IRQS */
>> #define KVM_ARM_IRQ_GIC_MAX 127
>>
>> +/* One single KVM irqchip, ie. the VGIC */
>> +#define KVM_NR_IRQCHIPS 1
>> +
>> /* PSCI interface */
>> #define KVM_PSCI_FN_BASE 0x95c1ba5e
>> #define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n))
>> diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
>> index 4be5bb1..7800261 100644
>> --- a/arch/arm/kvm/Kconfig
>> +++ b/arch/arm/kvm/Kconfig
>> @@ -24,6 +24,7 @@ config KVM
>> select KVM_MMIO
>> select KVM_ARM_HOST
>> depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN
>> + select HAVE_KVM_EVENTFD
>> ---help---
>> Support hosting virtualized guest machines. You will also
>> need to select one or more of the processor modules below.
>> @@ -55,7 +56,7 @@ config KVM_ARM_MAX_VCPUS
>> config KVM_ARM_VGIC
>> bool "KVM support for Virtual GIC"
>> depends on KVM_ARM_HOST && OF
>> - select HAVE_KVM_IRQCHIP
>> + select HAVE_KVM_IRQFD
>> default y
>> ---help---
>> Adds support for a hardware assisted, in-kernel GIC emulation.
>> diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
>> index 789bca9..2fa2f82 100644
>> --- a/arch/arm/kvm/Makefile
>> +++ b/arch/arm/kvm/Makefile
>> @@ -15,7 +15,7 @@ AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt)
>> AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt)
>>
>> KVM := ../../../virt/kvm
>> -kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o
>> +kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o
>>
>> obj-y += kvm-arm.o init.o interrupts.o
>> obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
>> diff --git a/arch/arm/kvm/irq.h b/arch/arm/kvm/irq.h
>> new file mode 100644
>> index 0000000..1275d91
>> --- /dev/null
>> +++ b/arch/arm/kvm/irq.h
>> @@ -0,0 +1,25 @@
>> +/*
>> + * Copyright (C) 2014 Linaro Ltd.
>> + * Authors: Eric Auger <eric.auger@linaro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License, version 2, as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +
>> +#ifndef __IRQ_H
>> +#define __IRQ_H
>> +
>> +#include <linux/kvm_host.h>
>> +/*
>> + * Placeholder for irqchip and irq/msi routing declarations
>> + * included in irqchip.c
>> + */
>
>> +
>> +#endif
>
> why is this needed?

irq.h still is included in eventfd.c. However I have the feeling that
after Paul's modifications, this is not needed anymore. Deserves more
checks however.
>
>> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
>> index 123030b..907e735 100644
>> --- a/virt/kvm/arm/vgic.c
>> +++ b/virt/kvm/arm/vgic.c
>> @@ -1259,7 +1259,10 @@ epilog:
>> static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
>> {
>> struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
>> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
>> bool level_pending = false;
>> + struct kvm *kvm = vcpu->kvm;
>> + int is_assigned_irq;
>>
>> kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
>>
>> @@ -1273,6 +1276,7 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
>> for_each_set_bit(lr, (unsigned long *)vgic_cpu->vgic_eisr,
>> vgic_cpu->nr_lr) {
>> irq = vgic_cpu->vgic_lr[lr] & GICH_LR_VIRTUALID;
>> + spin_lock(&dist->lock);
>> BUG_ON(vgic_irq_is_edge(vcpu, irq));
>>
>> vgic_irq_clear_queued(vcpu, irq);
>> @@ -1285,6 +1289,17 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
>> * interrupt.
>> */
>> vgic_dist_irq_clear_soft_pend(vcpu, irq);
>> + spin_unlock(&dist->lock);
>> +
>> + is_assigned_irq = kvm_irq_has_notifier(kvm, 0,
>> + irq - VGIC_NR_PRIVATE_IRQS);
>> +
>> + if (is_assigned_irq) {
>> + kvm_debug("EOI irqchip routed vIRQ %d\n", irq);
>> + kvm_notify_acked_irq(kvm, 0,
>> + irq - VGIC_NR_PRIVATE_IRQS);
>> + }
>> + spin_lock(&dist->lock);
>>
>> /* Any additional pending interrupt? */
>> if (vgic_dist_irq_get_level(vcpu, irq)) {
>> @@ -1305,6 +1320,7 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
>> */
>
> I think you can move the spin_unlock() up here since you're only mucking
> with the private vgic_cpu state (that only this vcpu thread can muck
> with) in the following two lines. Right
correct.
>
>> set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
>> vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
>> + spin_unlock(&dist->lock);
>
>
>> }
>> }
>>
>> @@ -1344,8 +1360,10 @@ static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
>> /* Check if we still have something up our sleeve... */
>> pending = find_first_zero_bit((unsigned long *)vgic_cpu->vgic_elrsr,
>> vgic_cpu->nr_lr);
>> + spin_lock(&dist->lock);
>> if (level_pending || pending < vgic_cpu->nr_lr)
>> set_bit(vcpu->vcpu_id, &dist->irq_pending_on_cpu);
>> + spin_unlock(&dist->lock);
>
> We only ever modify this on the dist with atomic bitops, so I actually
> don't think we need to grab the distributor lock here. Marc?
Waiting for Marc's feedback.
>
>> }
>>
>> void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
>> @@ -1362,14 +1380,10 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
>>
>> void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
>> {
>> - struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
>> -
>> if (!irqchip_in_kernel(vcpu->kvm))
>> return;
>>
>> - spin_lock(&dist->lock);
>> __kvm_vgic_sync_hwstate(vcpu);
>> - spin_unlock(&dist->lock);
>> }
>>
>> int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
>> @@ -2146,3 +2160,35 @@ struct kvm_device_ops kvm_arm_vgic_v2_ops = {
>> .get_attr = vgic_get_attr,
>> .has_attr = vgic_has_attr,
>> };
>> +
>> +int kvm_irq_map_gsi(struct kvm *kvm,
>> + struct kvm_kernel_irq_routing_entry *entries, int gsi)
>> +{
>> + return gsi;
>> +}
>> +
>> +int kvm_irq_map_chip_pin(struct kvm *kvm, unsigned irqchip, unsigned pin)
>> +{
>> + return pin;
>> +}
>> +
>> +int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level,
>> + bool line_status)
>> +{
>> + int r = -EINVAL;
>> + unsigned int spi = irq + VGIC_NR_PRIVATE_IRQS;
>> +
>> + if (spi > KVM_ARM_IRQ_GIC_MAX)
>> + return r;
>> +
>> + kvm_debug("Inject irqchip routed vIRQ %d\n", irq);
>> + r = kvm_vgic_inject_irq(kvm, 0, spi, level);
>> + return r;
>> +}
>> +
>> +/* MSI not implemented yet */
>
> yet? What is an MSI on ARM?
Well some MSI support comes with GICv2m and GICv3. My current
understanding is it makes sense to inject an MSI from an irqfd trigger.
Don't you share this understanding?
>
>> +int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
>> + struct kvm *kvm, int irq_source_id, int level, bool line_status)
>> +{
>> + return 0;
>> +}
>> --
>> 1.9.1
>>
>
> Thanks,
> -Christoffer
>



\
 
 \ /
  Last update: 2014-08-19 11:21    [W:1.004 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site