lkml.org 
[lkml]   [2014]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: sparc64 WARNING: at mm/mmap.c:2757 exit_mmap+0x13c/0x160()

I tested the merged sparc64 fixes in current git.

V100: with hugetlb, looping git clone still hangs the machine. RED
state on reboot has changed - before it gave the trace on reboot and
continued, now it contonues looping with the trace indefinitely, gcc
4.6.4

Netra X1: works fine with HugeTLB (but no hugetlbfs) and looping git
clone, gcc 4.6.4.

V440: fails to boot with 3.16 and gcc 4.9.1 (same message as before, in
fault_in_user_windows+0xe0/0x100). Tried latest git with gcc 4.9.1 but
it stops after before getting to the previous failure point:
[ 77.871887] console [tty0] enabled
[ 77.912630] bootconsole [earlyprom0] disabled

T2000: works fine with gcc 4.9.1 and hugetlb, 3.16. Hangs at boot at the
same point.

U2: looping git clone fails with 3.16, no hugetlb(!!!), gcc 4.6.4;

E420R: works fine with gcc 4.6.4. 3.16, hugetlb, looping git clone;
fails to boot with current git

E220R: works with gcc 4.6.4, no hugetlb, 3.16. Hangs on boot with
current git + hugetlb.

Did not test current git more. Will test the patches on top of 3.16
separately to see if/which one of these is the culprit.

--
Meelis Roos (mroos@linux.ee)


\
 
 \ /
  Last update: 2014-08-13 14:01    [W:0.137 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site