lkml.org 
[lkml]   [2014]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v4 4/5] ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi
Date
Am Donnerstag, 31. Juli 2014, 15:49:35 schrieb Doug Anderson:
> The EHCI and HSIC device tree nodes were added in the wrong place.
> Fix them.
>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

hmm, not sure if this counts as fix ... aka material for 3.17-rc2 or should
wait for 3.18. Simply because it's more a cosmetic thing.

If it is a fix, could base it on the appropriate dts revision, because here
it's in the middle of the dwc2 series, including the
usb_host1: usb@ff540000
nodes.


Heiko

> ---
> Changes in v4:
> - Based on the proper patch
>
> Changes in v3:
> - EHCI and HSIC move new for version 3.
>
> arch/arm/boot/dts/rk3288.dtsi | 41
> ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+),
> 21 deletions(-)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 9713054..49c99f2 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -156,6 +156,17 @@
> status = "disabled";
> };
>
> + usb_host0_ehci: usb@ff500000 {
> + compatible = "generic-ehci";
> + reg = <0xff500000 0x100>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_USBHOST0>;
> + clock-names = "usbhost";
> + status = "disabled";
> + };
> +
> + /* NOTE: ohci@ff520000 doesn't actually work on hardware */
> +
> usb_host1: usb@ff540000 {
> compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
> "snps,dwc2";
> @@ -176,6 +187,15 @@
> status = "disabled";
> };
>
> + usb_hsic: usb@ff5c0000 {
> + compatible = "generic-ehci";
> + reg = <0xff5c0000 0x100>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_HSIC>;
> + clock-names = "usbhost";
> + status = "disabled";
> + };
> +
> uart2: serial@ff690000 {
> compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
> reg = <0xff690000 0x100>;
> @@ -270,27 +290,6 @@
> interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> -
> - usb_host0_ehci: usb@ff500000 {
> - compatible = "generic-ehci";
> - reg = <0xff500000 0x100>;
> - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_USBHOST0>;
> - clock-names = "usbhost";
> - status = "disabled";
> - };
> -
> - /* NOTE: ohci@ff520000 doesn't actually work on hardware */
> -
> - usb_hsic: usb@ff5c0000 {
> - compatible = "generic-ehci";
> - reg = <0xff5c0000 0x100>;
> - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_HSIC>;
> - clock-names = "usbhost";
> - status = "disabled";
> - };
> -
> gic: interrupt-controller@ffc01000 {
> compatible = "arm,gic-400";
> interrupt-controller;



\
 
 \ /
  Last update: 2014-08-01 12:01    [W:3.439 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site