| From | Greg Kroah-Hartman <> | Subject | [PATCH 3.15 022/122] mtd: eLBC NAND: fix subpage write support | Date | Mon, 7 Jul 2014 16:56:24 -0700 |
| |
3.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pekon Gupta <pekon@ti.com>
commit f034d87def51f026b735d1e2877e9387011b2ba3 upstream.
As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc causes a crash if the driver did not register ecc->hwctl or ecc->calculate. This behavior was introduced in commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9 "mtd: nand: subpage write support for hardware based ECC schemes".
This fixes a crash by emulating subpage write support by padding sub-page data with 0xff on either sides to make it full page compatible.
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--- drivers/mtd/nand/fsl_elbc_nand.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
--- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -723,6 +723,19 @@ static int fsl_elbc_write_page(struct mt return 0; } +/* ECC will be calculated automatically, and errors will be detected in + * waitfunc. + */ +static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, uint32_t data_len, + const uint8_t *buf, int oob_required) +{ + fsl_elbc_write_buf(mtd, buf, mtd->writesize); + fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) { struct fsl_lbc_ctrl *ctrl = priv->ctrl; @@ -761,6 +774,7 @@ static int fsl_elbc_chip_init(struct fsl chip->ecc.read_page = fsl_elbc_read_page; chip->ecc.write_page = fsl_elbc_write_page; + chip->ecc.write_subpage = fsl_elbc_write_subpage; /* If CS Base Register selects full hardware ECC then use it */ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
|