lkml.org 
[lkml]   [2014]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] HID: cp2112: fix gpio value in gpio_direction_output
From
On Sun, Jun 29, 2014 at 2:13 AM, Antonio Borneo
<borneo.antonio@gmail.com> wrote:
> CP2112 does not offer an atomic method to set both gpio
> direction and value.
> Also it does not permit to set gpio value before putting
> gpio in output. In fact, accordingly to Silicon Labs
> AN495, Rev. 0.2, cpt. 4.4, the HID report to set gpio
> values "does not affect any pins that are not configured
> as outputs".
>
> This is confirmed on evaluation board CP2112-EK.
> With current driver, after execute:
> echo in > /sys/class/gpio/gpio248/direction
> echo low > /sys/class/gpio/gpio248/direction
> gpio output is still high. Only after a following
> echo low > /sys/class/gpio/gpio248/direction
> gpio output gets low.
>
> Fix driver by changing order of operations; first set
> direction then set value.
>
> The drawback of this new sequence is that we can have
> a pulse on gpio pin when direction is changed from
> input to output-low, but this cannot be avoided on
> current CP2112.

In this case, does keeping the first cp2112_gpio_set() before setting
the output direction prevents the pulse?
If so, then you can just keep the current code, and simply add the
cp2112_gpio_set() at the end of cp2112_gpio_direction_output().

In both case, this is:
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Cheers,
Benjamin

>
> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
> ---
> drivers/hid/hid-cp2112.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
> index 56be85a..3952d90 100644
> --- a/drivers/hid/hid-cp2112.c
> +++ b/drivers/hid/hid-cp2112.c
> @@ -240,8 +240,6 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
> u8 buf[5];
> int ret;
>
> - cp2112_gpio_set(chip, offset, value);
> -
> ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
> sizeof(buf), HID_FEATURE_REPORT,
> HID_REQ_GET_REPORT);
> @@ -260,6 +258,12 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
> return ret;
> }
>
> + /*
> + * Set gpio value when output direction is already set,
> + * as specified in AN495, Rev. 0.2, cpt. 4.4
> + */
> + cp2112_gpio_set(chip, offset, value);
> +
> return 0;
> }
>
> --
> 2.0.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2014-07-07 16:41    [W:0.980 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site