lkml.org 
[lkml]   [2014]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v9 0/7] ARM: berlin: add AHCI support
    Date
    This series adds the support for Berlin SoC AHCI controller. The
    controller allows to use the SATA host interface and, for example, the
    eSATA port on the BG2Q.

    The series adds a PHY driver to control the two SATA ports available,
    and adds a generic compatible to use the existing ahci_platform driver.

    Also enable the eSATA interface on the BG2Q DMP.

    Changes since v8:
    - stopped reset the controller from the PHY driver
    - removed fixed array sizes
    - got rid of the custom to_berlin_sata_phy_priv() macro
    - added dependency to HAS_IOMEM

    Changes since v7:
    - got back to the each PHY as a sub-node representation
    - renamed the power bit in the PHY driver

    Changes since v6:
    - added the 'clocks' property and support in the PHY driver
    - updated the PHY compatible

    Changes since v5:
    - rebased on top of v3.16-rc1
    - added the 'clocks' property in the sata node

    Changes since v4:
    - updated PHY driver as tristate
    - handled the case were no SATA port is enabled
    - updated the compatible to a generic one
    - cosmetic fixups

    Changes since v3:
    - moved all PHY operations to the PHY driver
    - removed PHY sub-nodes
    - removed the custom Berlin AHCI driver and switched to
    ahci_platform
    - added multiple PHYs support to the libahci_platform

    Changes since v2:
    - modeled each PHY as a sub-node
    - cosmetic fixups

    Changes since v1:
    - added a PHY driver, allowing to enable each port
    individually and removed the 'force-port-map' property
    - made the drivers a bit less magic :)
    - wrote a function to select and configure registers in the
    AHCI driver
    - removed BG2 / BG2CD nodes

    Antoine Ténart (7):
    phy: add a driver for the Berlin SATA PHY
    Documentation: bindings: add the Berlin SATA PHY
    ata: libahci: allow to use multiple PHYs
    ata: ahci_platform: add a generic AHCI compatible
    Documentation: bindings: document the sub-nodes AHCI bindings
    ARM: berlin: add the AHCI node for the BG2Q
    ARM: berlin: enable the eSATA interface on the BG2Q DMP

    .../devicetree/bindings/ata/ahci-platform.txt | 37 +++
    .../devicetree/bindings/phy/berlin-sata-phy.txt | 34 +++
    arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 +
    arch/arm/boot/dts/berlin2q.dtsi | 39 +++
    drivers/ata/ahci.h | 3 +-
    drivers/ata/ahci_platform.c | 2 +
    drivers/ata/libahci.c | 7 +
    drivers/ata/libahci_platform.c | 170 +++++++++---
    drivers/phy/Kconfig | 7 +
    drivers/phy/Makefile | 1 +
    drivers/phy/phy-berlin-sata.c | 284 +++++++++++++++++++++
    11 files changed, 556 insertions(+), 36 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
    create mode 100644 drivers/phy/phy-berlin-sata.c

    --
    1.9.1

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2014-07-07 12:41    [W:3.213 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site