Messages in this thread Patch in this message | | | From | jianqun <> | Subject | [PATCH] ASoC: max98090 add irq valid check | Date | Wed, 30 Jul 2014 16:54:17 +0800 |
| |
From: Jianqun <xjq@rock-chips.com>
Since IRQ pin from max98090 may NC, the irq number will be zero, that is invalid for request_threaded_irq, so just add irq valid check there.
Since hardware may not MUST to use IRQ pin of max98090 as jack detect, the driver can work well without it, can report jack trigger to CPU by a GPIO.
But here driver will register fail caused by failed to request irq.
Signed-off-by: Jianqun <xjq@rock-chips.com> --- sound/soc/codecs/max98090.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index 566919c..9dc0e8c 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2478,12 +2478,14 @@ static int max98090_probe(struct snd_soc_codec *codec) /* Register for interrupts */ dev_dbg(codec->dev, "irq = %d\n", max98090->irq); - ret = request_threaded_irq(max98090->irq, NULL, - max98090_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "max98090_interrupt", codec); - if (ret < 0) { - dev_err(codec->dev, "request_irq failed: %d\n", - ret); + if (max98090->irq) { + ret = request_threaded_irq(max98090->irq, NULL, + max98090_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "max98090_interrupt", codec); + if (ret < 0) { + dev_err(codec->dev, "request_irq failed: %d\n", + ret); + } } /* -- 1.7.9.5
| |