lkml.org 
[lkml]   [2014]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] Documentation: dt-bindings: add dt binding info for dwc2 dr_mode
Date
Indicate that the generic dr_mode binding should be used for dwc2.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

Changes in v2:
- Split out dr_mode and rk3288 bindings.

Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 94cdc9b..eb80d7b 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -18,6 +18,8 @@ Optional properties:
- phys: phy provider specifier
- phy-names: shall be "usb2-phy"
Refer to phy/phy-bindings.txt for generic phy consumer properties
+- dr_mode: shall be one of "host", "peripheral" and "otg"
+ Refer to usb/generic.txt

Example:

--
1.7.9.5



\
 
 \ /
  Last update: 2014-07-31 03:21    [W:0.053 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site