lkml.org 
[lkml]   [2014]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC][PATCH] irq: Rework IRQF_NO_SUSPENDED
Date
On Friday, July 25, 2014 11:27:25 AM Thomas Gleixner wrote:
> On Fri, 25 Jul 2014, Rafael J. Wysocki wrote:
> > On Thursday, July 24, 2014 11:26:20 PM Peter Zijlstra wrote:
> > > Subject: irq: Rework IRQF_NO_SUSPENDED
> > > From: Peter Zijlstra <peterz@infradead.org>
> > > Date: Thu Jul 24 22:34:50 CEST 2014
> > >
> > > Typically when devices are suspended they're quiesced such that they
> > > will not generate any further interrupts.
> > >
> > > However some devices should still generate interrupts, even when
> > > suspended, typically used to wake the machine back up.
> > >
> > > Such logic should ideally be contained inside each driver, if it can
> > > generate interrupts when suspended, it knows about this and the
> > > interrupt handler can deal with it.
> > >
> > > Except of course for shared interrupts, when such a wakeup device is
> > > sharing an interrupt line with a device that does not expect
> > > interrupts while suspended things can go funny.
> > >
> > > This is where IRQF_NO_SUSPEND comes in, the idea is that drivers that
> > > have the capability to wake the machine set IRQF_NO_SUSPEND and their
> > > handler will still be called, even when the IRQ subsystem is formally
> > > suspended. Handlers without IRQF_NO_SUSPEND will not be called.
> > >
> > > This replaced the prior implementation of IRQF_NO_SUSPEND which had
> > > a number of fatal issues in that it didn't actually work for the
> > > shared case, exactly the case it should be helping.
> > >
> > > There is still enable_irq_wake()/IRQD_WAKEUP_STATE that tries to serve
> > > a similar purpose but is equially wrecked for shared interrupts,
> > > ideally this would be removed.
> >
> > Let me comment about this particular thing.
> >
> > I had a discussion with Dmitry about that and his argument was that
> > enable_irq_wake() should imply IRQF_NO_SUSPEND, because drivers that
> > set up interrupts for system wakeup should expect those interrupts to
> > trigger at any time, including system suspend. Hence the patch that
> > added the IRQD_WAKEUP_STATE check to __disable_irq().
> >
> > However, in the face of the problem that is being addressed here I'm
> > not really sure that this argument is valid, because if the driver
> > calling enable_irq_wake() is sharing the IRQ with another one, the
> > other driver may not actually know that the IRQ will be a wakeup one
> > and still may not expect interrupts to come to it during system
> > suspend/resume.
> >
> > Yes, drivers using enable_irq_wake() will likely want IRQF_NO_SUSPEND to
> > be set for their irqactions, but that should not imply "no suspend" for
> > all irqactions sharing the same desc. So I guess it may be better to go
> > forth and use a global "interrupts suspended" state variable instead of the
> > IRQS_SUSPENDED flag for each desc and throw away the IRQD_WAKEUP_STATE
> > check from suspend_device_irqs() entirely.
>
> How should that global state work?

Well, never mind.

If the face of your remark about the level-triggered interrupts that's all moot.

Rafael



\
 
 \ /
  Last update: 2014-07-25 15:21    [W:0.133 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site