lkml.org 
[lkml]   [2014]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/19] Introduce ACPI for ARM64 based on ACPI 5.1
Hi folks,

I included the linaro-acpi-private mail list wrongly when I was sending them
out, it will cause Delivery Status Notification (Failure) when you are not
in that mail list, sorry for the messed up, it was a little bit late for me
last night, and little bit dottiness for me too, I must be tired :(

please remove the linaro-acpi-private mail list when you replied, Thanks.

Best Regards
Hanjun

On 2014-7-24 21:00, Hanjun Guo wrote:
> ACPI 5.1 was released [1] and it fixed some major gaps to run ACPI
> on ARM, this patch just follow the ACPI 5.1 spec and prepare the
> code to run ACPI on ARM64.
>
> ACPI 5.1 has some major changes for the following tables and
> method which are essential for ARM platforms:
>
> 1) MADT table updates.
> New fields were introduced to cover MPIDR and virtualization in
> GICC, and introduce GICR and GIC MSI frame structure to cover
> GICv3 and GICv2m (this patch set only cover GICv2).
>
> 2) FADT updates for PSCI
> New fields were introduced to cover PSCI and ACPI can use psci
> to boot SMP and other PSCI related functions.
>
> 3) GTDT
> GTDT was updated to support arch timer, memory-mapped tiemr,
> SBSA watchdog timer, in this patch, only arch timer tested on
> Juno board, so only arch timer init is available.
>
> 4) _DSD
> _DSD (Device Specific Data) will provide some key values which
> presented by FDT before, it makes possible that some devices can
> be emumerated in ACPI way, please refer to the document provided
> in this patch set for detail.
>
> This patch set is the ARM64 ACPI core patches covered MADT, FADT
> and GTDT, _DSD is not covered in this patch set. We first introduce
> acpi.c and its related head file which are needed by ACPI core, and
> then get RSDP to extract all the ACPI boot-time tables.
>
> When all the boot-time tables (FADT, MADT, GTDT) are ready, then
> parse them to init the sytem when booted. Specifically,
> a) we use FADT to init PSCI and use PSCI to boot SMP;
> b) Use MADT for GIC init and SMP init;
> c) GTDT for arch timer init.
>
> This patch set is based on the former ACPICA patches I sent, and I
> already compiled it OK with:
> a) each patch applied on ARM64 with CONFIG_ACPI=y;
> b) CONFIG_ACPI=n on ARM64;
> c) CONFIG_ACPI=y on x86.
>
> Also this patch set was tested by Graeme on ARM64 Juno platform, it
> boot successfully with ACPI only (no device tree).
>
> [1]
> You can download ACPI 5.1 from http://www.uefi.org/specifications
>
> Al Stone (3):
> ARM64 / ACPI: Get RSDP and ACPI boot-time tables
> ARM64 / ACPI: Introduce early_param for "acpi"
> ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on
> ARM64
>
> Ashwin Chaugule (1):
> ACPI / table: Add new function to get table entries
>
> Graeme Gregory (4):
> ARM64 / ACPI: Introduce lowlevel suspend function
> ARM64 / ACPI: If we chose to boot from acpi then disable FDT
> ARM64 / ACPI: Enable ARM64 in Kconfig
> Documentation: ACPI for ARM64
>
> Hanjun Guo (10):
> ARM64 / ACPI: Introduce arch_fix_phys_package_id() for cpu topology
> ARM64 / ACPI: Make PCI optional for ACPI on ARM64
> ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init
> ARM64 / ACPI: Parse MADT to map logical cpu to MPIDR and get
> cpu_possible/present_map
> ACPI / table: Print GIC information when MADT is parsed
> ARM64 / ACPI: Move the initialization of cpu_logical_map(0) before
> acpi_boot_init()
> ARM64 / ACPI: Get the enable method for SMP initialization in ACPI
> way
> ACPI / processor: Make it possible to get CPU hardware ID via GICC
> ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
> ARM64 / ACPI: Parse GTDT to initialize arch timer
>
> Tomasz Nowicki (1):
> ARM64 / ACPI: Add GICv2 specific ACPI boot support
>
> Documentation/arm64/arm-acpi.txt | 240 ++++++++++++++++++++
> Documentation/kernel-parameters.txt | 3 +-
> arch/arm64/Kconfig | 3 +
> arch/arm64/include/asm/acenv.h | 18 ++
> arch/arm64/include/asm/acpi.h | 90 ++++++++
> arch/arm64/include/asm/cpu.h | 11 +
> arch/arm64/include/asm/cpu_ops.h | 9 +-
> arch/arm64/include/asm/pci.h | 11 +
> arch/arm64/include/asm/smp.h | 2 +-
> arch/arm64/include/asm/topology.h | 2 +
> arch/arm64/kernel/Makefile | 1 +
> arch/arm64/kernel/acpi.c | 403 ++++++++++++++++++++++++++++++++++
> arch/arm64/kernel/cpu_ops.c | 52 ++++-
> arch/arm64/kernel/irq.c | 5 +
> arch/arm64/kernel/psci.c | 95 +++++---
> arch/arm64/kernel/setup.c | 11 +-
> arch/arm64/kernel/smp.c | 39 +++-
> arch/arm64/kernel/time.c | 7 +
> arch/arm64/kernel/topology.c | 14 ++
> drivers/acpi/Kconfig | 6 +-
> drivers/acpi/Makefile | 2 +-
> drivers/acpi/bus.c | 3 +
> drivers/acpi/internal.h | 5 +
> drivers/acpi/processor_core.c | 36 +++
> drivers/acpi/tables.c | 109 +++++++--
> drivers/clocksource/arm_arch_timer.c | 117 ++++++++--
> drivers/irqchip/irq-gic.c | 114 ++++++++++
> include/linux/acpi.h | 5 +
> include/linux/clocksource.h | 6 +
> include/linux/irqchip/arm-gic-acpi.h | 36 +++
> include/linux/pci.h | 37 +++-
> 31 files changed, 1397 insertions(+), 95 deletions(-)
> create mode 100644 Documentation/arm64/arm-acpi.txt
> create mode 100644 arch/arm64/include/asm/acenv.h
> create mode 100644 arch/arm64/include/asm/acpi.h
> create mode 100644 arch/arm64/include/asm/cpu.h
> create mode 100644 arch/arm64/include/asm/pci.h
> create mode 100644 arch/arm64/kernel/acpi.c
> create mode 100644 include/linux/irqchip/arm-gic-acpi.h
>



\
 
 \ /
  Last update: 2014-07-25 03:21    [W:0.419 / U:11.756 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site