lkml.org 
[lkml]   [2014]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Input: synaptics-rmi4 - fix compiler warnings in F11
On 07/23/2014 06:41 PM, Christopher Heiny wrote:
> On 07/22/2014 11:11 PM, Dmitry Torokhov wrote:
>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>
> I've reviewed this, and can say:
>
> Acked-by: Christopher Heiny <cheiny@synaptics.com>
>
> but I haven't had a chance to apply it to my build tree.
>
> Andrew - I'll be OOO for a couple of days. Can you do that, and add a
> Tested-by: or rev the patch, as appropriate?
>
> Thanks,
> Chris
>
It compiles cleanly and works on my test system.

Tested-by: Andrew Duggan <aduggan@synaptics.com>
>> ---
>> drivers/input/rmi4/rmi_f11.c | 135
>> +++++++++++++++++++++++--------------------
>> 1 file changed, 71 insertions(+), 64 deletions(-)
>>
>> diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
>> index b739d31..7af4f68 100644
>> --- a/drivers/input/rmi4/rmi_f11.c
>> +++ b/drivers/input/rmi4/rmi_f11.c
>> @@ -553,7 +553,7 @@ struct f11_data {
>> unsigned long *result_bits;
>> };
>>
>> -enum finger_state_values {
>> +enum f11_finger_state {
>> F11_NO_FINGER = 0x00,
>> F11_PRESENT = 0x01,
>> F11_INACCURATE = 0x02,
>> @@ -563,12 +563,14 @@ enum finger_state_values {
>> /** F11_INACCURATE state is overloaded to indicate pen present. */
>> #define F11_PEN F11_INACCURATE
>>
>> -static int get_tool_type(struct f11_2d_sensor *sensor, u8 finger_state)
>> +static int rmi_f11_get_tool_type(struct f11_2d_sensor *sensor,
>> + enum f11_finger_state finger_state)
>> {
>> if (IS_ENABLED(CONFIG_RMI4_F11_PEN) &&
>> sensor->sens_query.has_pen &&
>> finger_state == F11_PEN)
>> return MT_TOOL_PEN;
>> +
>> return MT_TOOL_FINGER;
>> }
>>
>> @@ -603,36 +605,32 @@ static void rmi_f11_rel_pos_report(struct
>> f11_2d_sensor *sensor, u8 n_finger)
>>
>> static void rmi_f11_abs_pos_report(struct f11_data *f11,
>> struct f11_2d_sensor *sensor,
>> - u8 finger_state, u8 n_finger)
>> + enum f11_finger_state finger_state,
>> + u8 n_finger)
>> {
>> struct f11_2d_data *data = &sensor->data;
>> + struct input_dev *input = sensor->input;
>> struct rmi_f11_2d_axis_alignment *axis_align =
>> &sensor->axis_align;
>> + u8 *pos_data = &data->abs_pos[n_finger * RMI_F11_ABS_BYTES];
>> u16 x, y, z;
>> int w_x, w_y, w_max, w_min, orient;
>> - int temp;
>> - u8 abs_base = n_finger * RMI_F11_ABS_BYTES;
>> + int tool_type = rmi_f11_get_tool_type(sensor, finger_state);
>> +
>> + if (sensor->type_a) {
>> + input_report_abs(input, ABS_MT_TRACKING_ID, n_finger);
>> + input_report_abs(input, ABS_MT_TOOL_TYPE, tool_type);
>> + } else {
>> + input_mt_slot(input, n_finger);
>> + input_mt_report_slot_state(input, tool_type,
>> + finger_state != F11_NO_FINGER);
>> + }
>>
>> if (finger_state) {
>> - x = (data->abs_pos[abs_base] << 4) |
>> - (data->abs_pos[abs_base + 2] & 0x0F);
>> - y = (data->abs_pos[abs_base + 1] << 4) |
>> - (data->abs_pos[abs_base + 2] >> 4);
>> - w_x = data->abs_pos[abs_base + 3] & 0x0F;
>> - w_y = data->abs_pos[abs_base + 3] >> 4;
>> - w_max = max(w_x, w_y);
>> - w_min = min(w_x, w_y);
>> - z = data->abs_pos[abs_base + 4];
>> -
>> - if (axis_align->swap_axes) {
>> - temp = x;
>> - x = y;
>> - y = temp;
>> - temp = w_x;
>> - w_x = w_y;
>> - w_y = temp;
>> - }
>> + x = (pos_data[0] << 4) | (pos_data[2] & 0x0F);
>> + y = (pos_data[1] << 4) | (pos_data[2] >> 4);
>>
>> - orient = w_x > w_y ? 1 : 0;
>> + if (axis_align->swap_axes)
>> + swap(x, y);
>>
>> if (axis_align->flip_x)
>> x = max(sensor->max_x - x, 0);
>> @@ -641,13 +639,13 @@ static void rmi_f11_abs_pos_report(struct
>> f11_data *f11,
>> y = max(sensor->max_y - y, 0);
>>
>> /*
>> - * here checking if X offset or y offset are specified is
>> - * redundant. We just add the offsets or, clip the values
>> - *
>> - * note: offsets need to be done before clipping occurs,
>> - * or we could get funny values that are outside
>> - * clipping boundaries.
>> - */
>> + * Here checking if X offset or y offset are specified is
>> + * redundant. We just add the offsets or clip the values.
>> + *
>> + * Note: offsets need to be applied before clipping occurs,
>> + * or we could get funny values that are outside of
>> + * clipping boundaries.
>> + */
>> x += axis_align->offset_x;
>> y += axis_align->offset_y;
>> x = max(axis_align->clip_x_low, x);
>> @@ -657,41 +655,44 @@ static void rmi_f11_abs_pos_report(struct
>> f11_data *f11,
>> if (axis_align->clip_y_high)
>> y = min(axis_align->clip_y_high, y);
>>
>> - }
>> + w_x = pos_data[3] & 0x0f;
>> + w_y = pos_data[3] >> 4;
>>
>> - /* Some UIs ignore W of zero, so we fudge it to 1 for pens. This
>> - * only appears to be an issue when reporting pens, not plain old
>> - * fingers. */
>> - if (IS_ENABLED(CONFIG_RMI4_F11_PEN) &&
>> - get_tool_type(sensor, finger_state) == MT_TOOL_PEN) {
>> - w_max = max(1, w_max);
>> - w_min = max(1, w_min);
>> - }
>> + if (axis_align->swap_axes)
>> + swap(w_x, w_y);
>>
>> - if (sensor->type_a) {
>> - input_report_abs(sensor->input, ABS_MT_TRACKING_ID, n_finger);
>> - input_report_abs(sensor->input, ABS_MT_TOOL_TYPE,
>> - get_tool_type(sensor, finger_state));
>> - } else {
>> - input_mt_slot(sensor->input, n_finger);
>> - input_mt_report_slot_state(sensor->input,
>> - get_tool_type(sensor, finger_state), finger_state);
>> - }
>> + orient = w_x > w_y ? 1 : 0;
>> +
>> + w_max = max(w_x, w_y);
>> + w_min = min(w_x, w_y);
>> +
>> + /*
>> + * Some UIs ignore W of zero, so we fudge it to 1 for pens.
>> This
>> + * only appears to be an issue when reporting pens, not
>> plain old
>> + * fingers.
>> + */
>> + if (tool_type == MT_TOOL_PEN) {
>> + w_max = max(1, w_max);
>> + w_min = max(1, w_min);
>> + }
>> +
>> + z = pos_data[4];
>> +
>> + input_report_abs(input, ABS_MT_PRESSURE, z);
>> + input_report_abs(input, ABS_MT_TOUCH_MAJOR, w_max);
>> + input_report_abs(input, ABS_MT_TOUCH_MINOR, w_min);
>> + input_report_abs(input, ABS_MT_ORIENTATION, orient);
>> + input_report_abs(input, ABS_MT_POSITION_X, x);
>> + input_report_abs(input, ABS_MT_POSITION_Y, y);
>>
>> - if (finger_state) {
>> - input_report_abs(sensor->input, ABS_MT_PRESSURE, z);
>> - input_report_abs(sensor->input, ABS_MT_TOUCH_MAJOR, w_max);
>> - input_report_abs(sensor->input, ABS_MT_TOUCH_MINOR, w_min);
>> - input_report_abs(sensor->input, ABS_MT_ORIENTATION, orient);
>> - input_report_abs(sensor->input, ABS_MT_POSITION_X, x);
>> - input_report_abs(sensor->input, ABS_MT_POSITION_Y, y);
>> dev_dbg(&sensor->fn->dev,
>> "finger[%d]:%d - x:%d y:%d z:%d w_max:%d w_min:%d\n",
>> n_finger, finger_state, x, y, z, w_max, w_min);
>> }
>> +
>> /* MT sync between fingers */
>> if (sensor->type_a)
>> - input_mt_sync(sensor->input);
>> + input_mt_sync(input);
>> }
>>
>> static void rmi_f11_finger_handler(struct f11_data *f11,
>> @@ -710,25 +711,31 @@ static void rmi_f11_finger_handler(struct
>> f11_data *f11,
>> /* Possible of having 4 fingers per f_statet register */
>> finger_state = (f_state[i / 4] >> (2 * (i % 4))) &
>> FINGER_STATE_MASK;
>> - if (finger_state == F11_RESERVED) {
>> - pr_err("%s: Invalid finger state[%d]:0x%02x.", __func__,
>> - i, finger_state);
>> + switch (finger_state) {
>> + case F11_RESERVED:
>> + pr_err("Invalid finger state[%d]: 0x%02x", i,
>> finger_state);
>> continue;
>> - } else if ((finger_state == F11_PRESENT) ||
>> - (finger_state == F11_INACCURATE)) {
>> +
>> + case F11_PRESENT:
>> + case F11_INACCURATE:
>> finger_pressed_count++;
>> + break;
>> +
>> + case F11_NO_FINGER:
>> + break;
>> }
>>
>> abs_bits = bitmap_and(f11->result_bits, irq_bits,
>> f11->abs_mask,
>> - num_irq_regs);
>> + num_irq_regs);
>> if (abs_bits)
>> rmi_f11_abs_pos_report(f11, sensor, finger_state, i);
>>
>> rel_bits = bitmap_and(f11->result_bits, irq_bits,
>> f11->rel_mask,
>> - num_irq_regs);
>> + num_irq_regs);
>> if (rel_bits)
>> rmi_f11_rel_pos_report(sensor, i);
>> }
>> +
>> input_mt_sync_frame(sensor->input);
>> input_sync(sensor->input);
>> }
>>
>
>



\
 
 \ /
  Last update: 2014-07-24 22:41    [W:0.069 / U:2.608 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site