lkml.org 
[lkml]   [2014]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 10/28] phy: add hix5hd2-sata-phy driver
From
Date
On Tue, 2014-07-22 at 16:26 +0530, Kishon Vijay Abraham I wrote:
> From: Jiancheng Xue <xuejiancheng@huawei.com>
>
> Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc.
>
> Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---

This landed as commit e379413a346c in today's linux-next (ie,
next-20140724).

> drivers/phy/Kconfig | 8 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-hix5hd2-sata.c | 192 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 201 insertions(+)
> create mode 100644 drivers/phy/phy-hix5hd2-sata.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 64b98d2..30c82fc 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -109,6 +109,14 @@ config PHY_EXYNOS5250_SATA
> SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
> port to accept one SATA device.
>
> +config PHY_HIX5HD2_SATA
> + tristate "HIX5HD2 SATA PHY Driver"
> + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Support for SATA PHY on Hisilicon hix5hd2 Soc.
> +
> config PHY_SUN4I_USB
> tristate "Allwinner sunxi SoC USB PHY driver"
> depends on ARCH_SUNXI && HAS_IOMEM && OF

Apparently the code to add ARCH_HIX5HD2 is still pending. (I already
asked about that symbol in https://lkml.org/lkml/2014/6/19/99 .)

So currently this driver won't get build testing through linux-next.
Perhaps this entry could optionally depend on COMPILE_TEST, if build
testing is wanted, that is. (I assume there are ate least build robots
using COMPILE_TEST. Is that correct?)


Paul Bolle



\
 
 \ /
  Last update: 2014-07-24 14:01    [W:0.156 / U:2.396 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site