lkml.org 
[lkml]   [2014]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v11 0/8] ARM: berlin: add AHCI support
Date
Changes since v10:
- made a 1:1 relation between PHYs and ports numbers
- added a SoC specific compatible when using 'generic-ahci'

Changes since v9:
- moved port_map parameters into the AHCI structure

Changes since v8:
- stopped reset the controller from the PHY driver
- removed fixed array sizes
- got rid of the custom to_berlin_sata_phy_priv() macro
- added dependency to HAS_IOMEM

Changes since v7:
- got back to the each PHY as a sub-node representation
- renamed the power bit in the PHY driver

Changes since v6:
- added the 'clocks' property and support in the PHY driver
- updated the PHY compatible

Changes since v5:
- rebased on top of v3.16-rc1
- added the 'clocks' property in the sata node

Changes since v4:
- updated PHY driver as tristate
- handled the case were no SATA port is enabled
- updated the compatible to a generic one
- cosmetic fixups

Changes since v3:
- moved all PHY operations to the PHY driver
- removed PHY sub-nodes
- removed the custom Berlin AHCI driver and switched to
ahci_platform
- added multiple PHYs support to the libahci_platform

Changes since v2:
- modeled each PHY as a sub-node
- cosmetic fixups

Changes since v1:
- added a PHY driver, allowing to enable each port
individually and removed the 'force-port-map' property
- made the drivers a bit less magic :)
- wrote a function to select and configure registers in the
AHCI driver
- removed BG2 / BG2CD nodes

Antoine Ténart (8):
phy: add a driver for the Berlin SATA PHY
Documentation: bindings: add the Berlin SATA PHY
ata: libahci_platform: move port_map parameters into the AHCI
structure
ata: libahci: allow to use multiple PHYs
ata: ahci_platform: add a generic AHCI compatible
Documentation: bindings: document the sub-nodes AHCI bindings
ARM: berlin: add the AHCI node for the BG2Q
ARM: berlin: enable the eSATA interface on the BG2Q DMP

.../devicetree/bindings/ata/ahci-platform.txt | 41 +++
.../devicetree/bindings/phy/berlin-sata-phy.txt | 34 +++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 +
arch/arm/boot/dts/berlin2q.dtsi | 39 +++
drivers/ata/ahci.h | 13 +-
drivers/ata/ahci_da850.c | 3 +-
drivers/ata/ahci_imx.c | 3 +-
drivers/ata/ahci_mvebu.c | 3 +-
drivers/ata/ahci_platform.c | 5 +-
drivers/ata/ahci_st.c | 2 +-
drivers/ata/ahci_sunxi.c | 2 +-
drivers/ata/ahci_xgene.c | 2 +-
drivers/ata/libahci.c | 17 +-
drivers/ata/libahci_platform.c | 198 ++++++++++----
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-berlin-sata.c | 284 +++++++++++++++++++++
include/linux/ahci_platform.h | 4 +-
18 files changed, 593 insertions(+), 73 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
create mode 100644 drivers/phy/phy-berlin-sata.c

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-07-24 12:01    [W:0.089 / U:1.604 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site