lkml.org 
[lkml]   [2014]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: zynq: DT: Add CAN node
On Wed, 2014-07-23 at 03:05PM +0200, Michal Simek wrote:
> Add node describing Zynq's CAN controller.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm/boot/dts/zynq-7000.dtsi | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index 366ca6434f54..2287d9b4ed1a 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -71,7 +71,18 @@
> interrupts = <0 7 4>;
> interrupt-parent = <&intc>;
> clocks = <&clkc 12>;
> - };
> + };
> +
> + can0: can@e0008000 {
> + compatible = "xlnx,zynq-can-1.0";
> + clocks = <&clkc 19>, <&clkc 36>;
> + clock-names = "can_clk", "pclk";
> + reg = <0xe0008000 0x1000>;
> + interrupts = <0 28 4>;
> + interrupt-parent = <&intc>;
> + tx-fifo-depth = <0x40>;
> + rx-fifo-depth = <0x40>;
> + };

What about the second CAN core? You also probably want to add
'status = "disabled"' in the dtsi.

Sören

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-07-23 18:41    [W:0.061 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site