Messages in this thread | | | Date | Wed, 2 Jul 2014 10:04:46 +0200 | From | Boris BREZILLON <> | Subject | Re: [PATCH 05/33] ARM: at91/dt: rm9200: define clocks |
| |
Hello Alexandre,
On Tue, 1 Jul 2014 16:12:14 +0200 Alexandre Belloni <alexandre.belloni@free-electrons.com> wrote:
> Signed-off-by: Alexandre Belloni > <alexandre.belloni@free-electrons.com> --- > arch/arm/boot/dts/at91rm9200.dtsi | 304 > ++++++++++++++++++++++++++++++++++++++ 1 file changed, 304 > insertions(+) > > diff --git a/arch/arm/boot/dts/at91rm9200.dtsi > b/arch/arm/boot/dts/at91rm9200.dtsi index c61b16fba79b..477cfe570f47 > 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi > +++ b/arch/arm/boot/dts/at91rm9200.dtsi > @@ -14,6 +14,7 @@ > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/clock/at91.h> > > / { > model = "Atmel AT91RM9200 family SoC"; > @@ -51,6 +52,20 @@ > reg = <0x20000000 0x04000000>; > }; > > + clocks {
[...]
> + > + tcb0_clk: tcb0_clk { > + #clock-cells = <0>; > + reg = <17>; > + }; > + > + tcb1_clk: tcb1_clk { > + #clock-cells = <0>; > + reg = <18>; > + }; > + > + tcb2_clk: tcb2_clk { > + #clock-cells = <0>; > + reg = <19>; > + }; > + > + tcb3_clk: tcb3_clk { > + #clock-cells = <0>; > + reg = <20>; > + }; > + > + tcb4_clk: tcb4_clk { > + #clock-cells = <0>; > + reg = <21>; > + }; > + > + tcb5_clk: tcb5_clk { > + #clock-cells = <0>; > + reg = <22>; > + };
Just a nitpick, but the names defined in at91rm9200.c and in the datasheet are tcX_clk and not tcbX_clk.
Best Regards,
Boris
-- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
| |