Messages in this thread | | | Date | Fri, 18 Jul 2014 21:27:28 +0400 | From | Sergei Shtylyov <> | Subject | Re: [PATCH v10 2/8] Documentation: bindings: add the Berlin SATA PHY |
| |
Hello.
On 07/18/2014 04:30 PM, Antoine Ténart wrote:
> The Berlin SATA PHY drives the PHY related to the SATA interface. Add > the corresponding documentation.
> Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> > --- > .../devicetree/bindings/phy/berlin-sata-phy.txt | 34 ++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
> diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt > new file mode 100644 > index 000000000000..88f8c23384c0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt > @@ -0,0 +1,34 @@ > +Berlin SATA PHY > +--------------- > + > +Required properties: > +- compatible: should be "marvell,berlin2q-sata-phy" > +- address-cells: should be 1 > +- size-cells: should be 0 > +- phy-cells: from the generic PHY bindings, must be 1
It's "#address-cells", "#size-cells", and "#phy-cells".
> +- reg: address and length of the register > +- clocks: reference to the clock entry > + > +Sub-nodes: > +Each PHY should be represented as a sub-node.
Then "#phy-cells" should also belong to the sub-nodes.
> + > +Sub-nodes required properties: > +- reg: the PHY number
WBR, Sergei
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |