lkml.org 
[lkml]   [2014]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] i2c: stub: Add support for SMBus block commands
On Thu, 17 Jul 2014 15:21:35 +0200, Wolfram Sang wrote:
> On Mon, Jul 07, 2014 at 07:23:03AM -0700, Guenter Roeck wrote:
> > SMBus block commands are different to I2C block commands since
> > the returned data is not normally accessible with byte or word
> > commands on other command offsets. Add linked list of 'block'
> > commands to support those commands.
> >
> > Access mechanism is quite simple: Block commands must be written
> > before they can be read. The first write selects the block length.
> > Subsequent writes can be partial. Block read commands always return
> > the number of bytes selected with the first write.
> >
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> > ---
> > v2: Make new functionality only available on request via functionality
> > module parameter
> > Add more details about SMBus block mode support to documentation
> > Use correct sizeof() variable in devm_kzalloc
> > Use stub_find_block() only in SMBus block command itself.
> > Store first word of block data in chip->words[].
> > When writing block data and the written data is longer than
> > the first write, bail out with debug message indicating the reason
> > for the error.
>
> Thanks for doing this and thanks to Jean for the thorough review.

You're welcome.

> The thing I miss is the documentation that SMBUS_BLOCK must explicitly
> be activated and the description how to do it. A comment in the driver,
> above STUB_FUNC_* defines might not hurt as well.

Good point.

> Also, I'd prefer to squash Jean's "increasing block length" patch into
> this one if both of you are fine with that?

Yes, I would be perfectly fine with that.

Guenter, can you please send an updated patch?

--
Jean Delvare
SUSE L3 Support


\
 
 \ /
  Last update: 2014-07-17 16:21    [W:0.643 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site