Messages in this thread Patch in this message | | | From | Vivek Gautam <> | Subject | [PATCH v4 2/4] usb: host: xhci-plat: Get PHYs for xhci's hcds | Date | Wed, 16 Jul 2014 13:51:40 +0530 |
| |
The host controller by itself may sometimes need to handle PHY and/or calibrate some of the PHY settings to get full support out of the PHY controller. The PHY core provides a calibration funtionality now to do so. Therefore, facilitate getting the two possible PHYs, viz. USB 2.0 type (UTMI+) and USB 3.0 type (PIPE3).
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> ---
Changes from v3: - Modified error message as per review comments from Julius.
drivers/usb/host/xhci-plat.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 1a0cf9f..b1c0364 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/phy/phy.h> #include <linux/slab.h> #include <linux/usb/xhci_pdriver.h> @@ -180,6 +181,15 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_hcd; } + /* Get possile USB 2.0 type PHY (UTMI+) available with xhci */ + hcd->gen_phy = devm_phy_get(&pdev->dev, "usb2-phy"); + if (IS_ERR(hcd->gen_phy)) { + ret = PTR_ERR(hcd->gen_phy); + if (ret != -ENOSYS && ret != -ENODEV) + dev_warn(&pdev->dev, + "Error retrieving usb2 phy: %d\n", ret); + } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto disable_clk; @@ -209,6 +219,15 @@ static int xhci_plat_probe(struct platform_device *pdev) if (HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; + /* Get possile USB 3.0 type PHY (PIPE3) available with xhci */ + xhci->shared_hcd->gen_phy = devm_phy_get(&pdev->dev, "usb3-phy"); + if (IS_ERR(xhci->shared_hcd->gen_phy)) { + ret = PTR_ERR(xhci->shared_hcd->gen_phy); + if (ret != -ENOSYS && ret != -ENODEV) + dev_warn(&pdev->dev, + "Error retrieving usb3 phy: %d\n", ret); + } + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) goto put_usb3_hcd; -- 1.7.10.4
| |